3D-Drucker%2FSlicerBundle.ini.mw

   1 # generated by Slic3r 1.2.9 on Mon Nov 21 19:45:57 2016
   2
   3 [filament:1.75mm ABS]
   4 bed_temperature = 0
   5 bridge_fan_speed = 50
   6 cooling = 1
   7 disable_fan_first_layers = 1
   8 extrusion_multiplier = 1
   9 fan_always_on = 0
  10 fan_below_layer_time = 60
  11 filament_colour = #FFFFFF
  12 filament_diameter = 1.75
  13 first_layer_bed_temperature = 0
  14 first_layer_temperature = 240
  15 max_fan_speed = 0
  16 min_fan_speed = 0
  17 min_print_speed = 5
  18 slowdown_below_layer_time = 30
  19 temperature = 230
  20
  21 [filament:1.75mm Holz]
  22 bed_temperature = 50
  23 bridge_fan_speed = 100
  24 cooling = 1
  25 disable_fan_first_layers = 1
  26 extrusion_multiplier = 1
  27 fan_always_on = 1
  28 fan_below_layer_time = 60
  29 filament_colour = #FFFFFF
  30 filament_diameter = 1.75
  31 first_layer_bed_temperature = 50
  32 first_layer_temperature = 200
  33 max_fan_speed = 100
  34 min_fan_speed = 50
  35 min_print_speed = 5
  36 slowdown_below_layer_time = 30
  37 temperature = 190
  38
  39 [filament:1.75mm PLA]
  40 bed_temperature = 50
  41 bridge_fan_speed = 100
  42 cooling = 1
  43 disable_fan_first_layers = 1
  44 extrusion_multiplier = 1
  45 fan_always_on = 1
  46 fan_below_layer_time = 60
  47 filament_colour = #FFFFFF
  48 filament_diameter = 1.75
  49 first_layer_bed_temperature = 50
  50 first_layer_temperature = 200
  51 max_fan_speed = 100
  52 min_fan_speed = 50
  53 min_print_speed = 5
  54 slowdown_below_layer_time = 15
  55 temperature = 185
  56
  57 [filament:1.75mm PLA TinyBoy]
  58 bed_temperature = 0
  59 bridge_fan_speed = 100
  60 cooling = 1
  61 disable_fan_first_layers = 2
  62 extrusion_multiplier = 1
  63 fan_always_on = 1
  64 fan_below_layer_time = 60
  65 filament_colour = #FF8000
  66 filament_diameter = 1.75
  67 first_layer_bed_temperature = 0
  68 first_layer_temperature = 200
  69 max_fan_speed = 40
  70 min_fan_speed = 35
  71 min_print_speed = 5
  72 slowdown_below_layer_time = 15
  73 temperature = 190
  74
  75 [filament:2.85mm ABS]
  76 bed_temperature = 100
  77 bridge_fan_speed = 50
  78 cooling = 1
  79 disable_fan_first_layers = 1
  80 extrusion_multiplier = 1
  81 fan_always_on = 0
  82 fan_below_layer_time = 60
  83 filament_colour = #FFFFFF
  84 filament_diameter = 2.85
  85 first_layer_bed_temperature = 100
  86 first_layer_temperature = 250
  87 max_fan_speed = 0
  88 min_fan_speed = 0
  89 min_print_speed = 5
  90 slowdown_below_layer_time = 20
  91 temperature = 230
  92
  93 [filament:2.85mm PETG ]
  94 bed_temperature = 75
  95 bridge_fan_speed = 100
  96 cooling = 1
  97 disable_fan_first_layers = 1
  98 extrusion_multiplier = 1
  99 fan_always_on = 1
 100 fan_below_layer_time = 60
 101 filament_colour = #B1EB96
 102 filament_diameter = 2.85
 103 first_layer_bed_temperature = 75
 104 first_layer_temperature = 235
 105 max_fan_speed = 100
 106 min_fan_speed = 50
 107 min_print_speed = 10
 108 slowdown_below_layer_time = 30
 109 temperature = 235
 110
 111 [filament:2.85mm PLA]
 112 bed_temperature = 50
 113 bridge_fan_speed = 100
 114 cooling = 1
 115 disable_fan_first_layers = 1
 116 extrusion_multiplier = 1
 117 fan_always_on = 1
 118 fan_below_layer_time = 60
 119 filament_colour = #FF00FF
 120 filament_diameter = 2.85
 121 first_layer_bed_temperature = 50
 122 first_layer_temperature = 200
 123 max_fan_speed = 100
 124 min_fan_speed = 35
 125 min_print_speed = 10
 126 slowdown_below_layer_time = 10
 127 temperature = 185
 128
 129 [filament:2.85mm Willowflex]
 130 bed_temperature = 70
 131 bridge_fan_speed = 100
 132 cooling = 1
 133 disable_fan_first_layers = 1
 134 extrusion_multiplier = 1
 135 fan_always_on = 1
 136 fan_below_layer_time = 60
 137 filament_colour = #BF0005
 138 filament_diameter = 2.85
 139 first_layer_bed_temperature = 70
 140 first_layer_temperature = 160
 141 max_fan_speed = 100
 142 min_fan_speed = 35
 143 min_print_speed = 10
 144 slowdown_below_layer_time = 10
 145 temperature = 160
 146
 147 [presets]
 148 filament = 2.85mm Willowflex.ini
 149 print = prusa i3.ini
 150 printer = prusa i3.ini
 151
 152 [print:Lulzbot]
 153 avoid_crossing_perimeters = 0
 154 bottom_solid_layers = 4
 155 bridge_acceleration = 0
 156 bridge_flow_ratio = 1
 157 bridge_speed = 60
 158 brim_width = 1
 159 complete_objects = 0
 160 default_acceleration = 0
 161 dont_support_bridges = 1
 162 external_fill_pattern = rectilinear
 163 external_perimeter_extrusion_width = 0
 164 external_perimeter_speed = 40
 165 external_perimeters_first = 0
 166 extra_perimeters = 1
 167 extruder_clearance_height = 20
 168 extruder_clearance_radius = 20
 169 extrusion_width = 0
 170 fill_angle = 35
 171 fill_density = 20%
 172 fill_pattern = rectilinear
 173 first_layer_acceleration = 0
 174 first_layer_extrusion_width = 0
 175 first_layer_height = 0.2
 176 first_layer_speed = 10
 177 gap_fill_speed = 20
 178 gcode_comments = 0
 179 infill_acceleration = 0
 180 infill_every_layers = 1
 181 infill_extruder = 1
 182 infill_extrusion_width = 0
 183 infill_first = 0
 184 infill_only_where_needed = 0
 185 infill_overlap = 15%
 186 infill_speed = 80
 187 interface_shells = 0
 188 layer_height = 0.2
 189 max_print_speed = 100
 190 max_volumetric_speed = 0
 191 min_skirt_length = 3
 192 notes =
 193 only_retract_when_crossing_perimeters = 1
 194 ooze_prevention = 0
 195 output_filename_format = [input_filename_base].gcode
 196 overhangs = 1
 197 perimeter_acceleration = 0
 198 perimeter_extruder = 1
 199 perimeter_extrusion_width = 0
 200 perimeter_speed = 80
 201 perimeters = 3
 202 post_process =
 203 raft_layers = 0
 204 resolution = 0
 205 seam_position = nearest
 206 skirt_distance = 6
 207 skirt_height = 1
 208 skirts = 1
 209 small_perimeter_speed = 15
 210 solid_infill_below_area = 30
 211 solid_infill_every_layers = 0
 212 solid_infill_extruder = 1
 213 solid_infill_extrusion_width = 0
 214 solid_infill_speed = 60
 215 spiral_vase = 0
 216 standby_temperature_delta = -5
 217 support_material = 0
 218 support_material_angle = 0
 219 support_material_contact_distance = 0.2
 220 support_material_enforce_layers = 0
 221 support_material_extruder = 1
 222 support_material_extrusion_width = 0
 223 support_material_interface_extruder = 1
 224 support_material_interface_layers = 3
 225 support_material_interface_spacing = 0
 226 support_material_interface_speed = 40
 227 support_material_pattern = rectilinear
 228 support_material_spacing = 2.5
 229 support_material_speed = 60
 230 support_material_threshold = 0
 231 thin_walls = 1
 232 threads = 2
 233 top_infill_extrusion_width = 0
 234 top_solid_infill_speed = 40
 235 top_solid_layers = 4
 236 travel_speed = 130
 237 xy_size_compensation = 0
 238
 239 [print:MendelPro]
 240 avoid_crossing_perimeters = 0
 241 bottom_solid_layers = 4
 242 bridge_acceleration = 0
 243 bridge_flow_ratio = 1
 244 bridge_speed = 40
 245 brim_width = 1
 246 complete_objects = 0
 247 default_acceleration = 0
 248 dont_support_bridges = 1
 249 external_fill_pattern = rectilinear
 250 external_perimeter_extrusion_width = 0
 251 external_perimeter_speed = 30
 252 external_perimeters_first = 0
 253 extra_perimeters = 1
 254 extruder_clearance_height = 20
 255 extruder_clearance_radius = 20
 256 extrusion_width = 0
 257 fill_angle = 45
 258 fill_density = 20%
 259 fill_pattern = rectilinear
 260 first_layer_acceleration = 0
 261 first_layer_extrusion_width = 0
 262 first_layer_height = 0.2
 263 first_layer_speed = 10
 264 gap_fill_speed = 10
 265 gcode_comments = 0
 266 infill_acceleration = 0
 267 infill_every_layers = 1
 268 infill_extruder = 1
 269 infill_extrusion_width = 0
 270 infill_first = 0
 271 infill_only_where_needed = 0
 272 infill_overlap = 15%
 273 infill_speed = 0
 274 interface_shells = 0
 275 layer_height = 0.2
 276 max_print_speed = 80
 277 max_volumetric_speed = 0
 278 min_skirt_length = 2
 279 notes =
 280 only_retract_when_crossing_perimeters = 1
 281 ooze_prevention = 0
 282 output_filename_format = [input_filename_base].gcode
 283 overhangs = 1
 284 perimeter_acceleration = 0
 285 perimeter_extruder = 1
 286 perimeter_extrusion_width = 0
 287 perimeter_speed = 0
 288 perimeters = 2
 289 post_process =
 290 raft_layers = 0
 291 resolution = 0
 292 seam_position = nearest
 293 skirt_distance = 10
 294 skirt_height = 1
 295 skirts = 1
 296 small_perimeter_speed = 10
 297 solid_infill_below_area = 70
 298 solid_infill_every_layers = 0
 299 solid_infill_extruder = 1
 300 solid_infill_extrusion_width = 0
 301 solid_infill_speed = 0
 302 spiral_vase = 0
 303 standby_temperature_delta = -5
 304 support_material = 1
 305 support_material_angle = 0
 306 support_material_contact_distance = 0.4
 307 support_material_enforce_layers = 0
 308 support_material_extruder = 1
 309 support_material_extrusion_width = 0
 310 support_material_interface_extruder = 1
 311 support_material_interface_layers = 3
 312 support_material_interface_spacing = 0
 313 support_material_interface_speed = 100%
 314 support_material_pattern = pillars
 315 support_material_spacing = 3
 316 support_material_speed = 60
 317 support_material_threshold = 0
 318 thin_walls = 1
 319 threads = 2
 320 top_infill_extrusion_width = 0
 321 top_solid_infill_speed = 20
 322 top_solid_layers = 4
 323 travel_speed = 100
 324 xy_size_compensation = 0
 325
 326 [print:TinyBoy]
 327 avoid_crossing_perimeters = 0
 328 bottom_solid_layers = 3
 329 bridge_acceleration = 0
 330 bridge_flow_ratio = 1
 331 bridge_speed = 40
 332 brim_width = 0
 333 complete_objects = 0
 334 default_acceleration = 0
 335 dont_support_bridges = 1
 336 external_fill_pattern = rectilinear
 337 external_perimeter_extrusion_width = 0
 338 external_perimeter_speed = 20
 339 external_perimeters_first = 0
 340 extra_perimeters = 1
 341 extruder_clearance_height = 20
 342 extruder_clearance_radius = 20
 343 extrusion_width = 0
 344 fill_angle = 45
 345 fill_density = 20%
 346 fill_pattern = 3dhoneycomb
 347 first_layer_acceleration = 0
 348 first_layer_extrusion_width = 0
 349 first_layer_height = 0.2
 350 first_layer_speed = 10
 351 gap_fill_speed = 20
 352 gcode_comments = 0
 353 infill_acceleration = 0
 354 infill_every_layers = 1
 355 infill_extruder = 1
 356 infill_extrusion_width = 0
 357 infill_first = 0
 358 infill_only_where_needed = 0
 359 infill_overlap = 15%
 360 infill_speed = 0
 361 interface_shells = 0
 362 layer_height = 0.2
 363 max_print_speed = 80
 364 max_volumetric_speed = 0
 365 min_skirt_length = 1
 366 notes =
 367 only_retract_when_crossing_perimeters = 1
 368 ooze_prevention = 0
 369 output_filename_format = [input_filename_base].gcode
 370 overhangs = 1
 371 perimeter_acceleration = 0
 372 perimeter_extruder = 1
 373 perimeter_extrusion_width = 0
 374 perimeter_speed = 0
 375 perimeters = 2
 376 post_process =
 377 raft_layers = 0
 378 resolution = 0
 379 seam_position = nearest
 380 skirt_distance = 1
 381 skirt_height = 1
 382 skirts = 1
 383 small_perimeter_speed = 0
 384 solid_infill_below_area = 70
 385 solid_infill_every_layers = 0
 386 solid_infill_extruder = 1
 387 solid_infill_extrusion_width = 0
 388 solid_infill_speed = 0
 389 spiral_vase = 0
 390 standby_temperature_delta = -5
 391 support_material = 0
 392 support_material_angle = 0
 393 support_material_contact_distance = 0.2
 394 support_material_enforce_layers = 0
 395 support_material_extruder = 1
 396 support_material_extrusion_width = 0
 397 support_material_interface_extruder = 1
 398 support_material_interface_layers = 2
 399 support_material_interface_spacing = 0
 400 support_material_interface_speed = 100%
 401 support_material_pattern = rectilinear
 402 support_material_spacing = 5
 403 support_material_speed = 0
 404 support_material_threshold = 40
 405 thin_walls = 1
 406 threads = 2
 407 top_infill_extrusion_width = 0
 408 top_solid_infill_speed = 20
 409 top_solid_layers = 4
 410 travel_speed = 100
 411 xy_size_compensation = 0
 412
 413 [print:Toy]
 414 avoid_crossing_perimeters = 0
 415 bottom_solid_layers = 2
 416 bridge_acceleration = 0
 417 bridge_flow_ratio = 1
 418 bridge_speed = 0
 419 brim_width = 0
 420 complete_objects = 0
 421 default_acceleration = 0
 422 dont_support_bridges = 1
 423 external_fill_pattern = rectilinear
 424 external_perimeter_extrusion_width = 0
 425 external_perimeter_speed = 0
 426 external_perimeters_first = 0
 427 extra_perimeters = 1
 428 extruder_clearance_height = 20
 429 extruder_clearance_radius = 20
 430 extrusion_width = 0
 431 fill_angle = 45
 432 fill_density = 0%
 433 fill_pattern = rectilinear
 434 first_layer_acceleration = 0
 435 first_layer_extrusion_width = 0
 436 first_layer_height = 0.2
 437 first_layer_speed = 10
 438 gap_fill_speed = 0
 439 gcode_comments = 0
 440 infill_acceleration = 0
 441 infill_every_layers = 1
 442 infill_extruder = 1
 443 infill_extrusion_width = 0
 444 infill_first = 0
 445 infill_only_where_needed = 0
 446 infill_overlap = 15%
 447 infill_speed = 0
 448 interface_shells = 0
 449 layer_height = 0.2
 450 max_print_speed = 10
 451 max_volumetric_speed = 0
 452 min_skirt_length = 1
 453 notes =
 454 only_retract_when_crossing_perimeters = 1
 455 ooze_prevention = 0
 456 output_filename_format = [input_filename_base].gcode
 457 overhangs = 1
 458 perimeter_acceleration = 0
 459 perimeter_extruder = 1
 460 perimeter_extrusion_width = 0
 461 perimeter_speed = 0
 462 perimeters = 2
 463 post_process =
 464 raft_layers = 0
 465 resolution = 0
 466 seam_position = aligned
 467 skirt_distance = 1
 468 skirt_height = 1
 469 skirts = 1
 470 small_perimeter_speed = 0
 471 solid_infill_below_area = 70
 472 solid_infill_every_layers = 0
 473 solid_infill_extruder = 1
 474 solid_infill_extrusion_width = 0
 475 solid_infill_speed = 0
 476 spiral_vase = 0
 477 standby_temperature_delta = -5
 478 support_material = 1
 479 support_material_angle = 0
 480 support_material_contact_distance = 0.3
 481 support_material_enforce_layers = 0
 482 support_material_extruder = 1
 483 support_material_extrusion_width = 0
 484 support_material_interface_extruder = 1
 485 support_material_interface_layers = 3
 486 support_material_interface_spacing = 0
 487 support_material_interface_speed = 100%
 488 support_material_pattern = rectilinear
 489 support_material_spacing = 5
 490 support_material_speed = 0
 491 support_material_threshold = 40
 492 thin_walls = 1
 493 threads = 2
 494 top_infill_extrusion_width = 0
 495 top_solid_infill_speed = 0
 496 top_solid_layers = 0
 497 travel_speed = 100
 498 xy_size_compensation = 0
 499
 500 [print:prusa i3]
 501 avoid_crossing_perimeters = 0
 502 bottom_solid_layers = 4
 503 bridge_acceleration = 0
 504 bridge_flow_ratio = 1
 505 bridge_speed = 40
 506 brim_width = 0
 507 complete_objects = 0
 508 default_acceleration = 1000
 509 dont_support_bridges = 1
 510 external_fill_pattern = rectilinear
 511 external_perimeter_extrusion_width = 0
 512 external_perimeter_speed = 30
 513 external_perimeters_first = 0
 514 extra_perimeters = 1
 515 extruder_clearance_height = 20
 516 extruder_clearance_radius = 20
 517 extrusion_width = 0
 518 fill_angle = 45
 519 fill_density = 20%
 520 fill_pattern = rectilinear
 521 first_layer_acceleration = 0
 522 first_layer_extrusion_width = 0
 523 first_layer_height = 0.2
 524 first_layer_speed = 10
 525 gap_fill_speed = 20
 526 gcode_comments = 0
 527 infill_acceleration = 0
 528 infill_every_layers = 1
 529 infill_extruder = 1
 530 infill_extrusion_width = 0
 531 infill_first = 0
 532 infill_only_where_needed = 0
 533 infill_overlap = 15%
 534 infill_speed = 80
 535 interface_shells = 0
 536 layer_height = 0.2
 537 max_print_speed = 100
 538 max_volumetric_speed = 0
 539 min_skirt_length = 3
 540 notes =
 541 only_retract_when_crossing_perimeters = 1
 542 ooze_prevention = 0
 543 output_filename_format = [input_filename_base].gcode
 544 overhangs = 1
 545 perimeter_acceleration = 0
 546 perimeter_extruder = 1
 547 perimeter_extrusion_width = 0
 548 perimeter_speed = 60
 549 perimeters = 3
 550 post_process =
 551 raft_layers = 0
 552 resolution = 0
 553 seam_position = nearest
 554 skirt_distance = 6
 555 skirt_height = 1
 556 skirts = 1
 557 small_perimeter_speed = 15
 558 solid_infill_below_area = 70
 559 solid_infill_every_layers = 0
 560 solid_infill_extruder = 1
 561 solid_infill_extrusion_width = 0
 562 solid_infill_speed = 60
 563 spiral_vase = 0
 564 standby_temperature_delta = -5
 565 support_material = 1
 566 support_material_angle = 0
 567 support_material_contact_distance = 0.2
 568 support_material_enforce_layers = 0
 569 support_material_extruder = 1
 570 support_material_extrusion_width = 0
 571 support_material_interface_extruder = 1
 572 support_material_interface_layers = 3
 573 support_material_interface_spacing = 0
 574 support_material_interface_speed = 75%
 575 support_material_pattern = pillars
 576 support_material_spacing = 2.5
 577 support_material_speed = 60
 578 support_material_threshold = 0
 579 thin_walls = 1
 580 threads = 2
 581 top_infill_extrusion_width = 0
 582 top_solid_infill_speed = 30
 583 top_solid_layers = 4
 584 travel_speed = 100
 585 xy_size_compensation = 0
 586
 587 [printer:Lulzbot]
 588 bed_shape = 0x0,298x0,298x275,0x275
 589 before_layer_gcode =
 590 end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors\n\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\n
 591 extruder_offset = 0x0
 592 gcode_flavor = reprap
 593 layer_gcode =
 594 nozzle_diameter = 0.35
 595 octoprint_apikey =
 596 octoprint_host =
 597 pressure_advance = 0
 598 retract_before_travel = 2
 599 retract_layer_change = 1
 600 retract_length = 3
 601 retract_length_toolchange = 3
 602 retract_lift = 0
 603 retract_restart_extra = 0
 604 retract_restart_extra_toolchange = 0
 605 retract_speed = 40
 606 start_gcode = G28 ; home all axes\n
 607 toolchange_gcode =
 608 use_firmware_retraction = 0
 609 use_relative_e_distances = 0
 610 use_volumetric_e = 0
 611 vibration_limit = 0
 612 wipe = 0
 613 z_offset = 0
 614
 615 [printer:MendelPro]
 616 bed_shape = 0x0,220x0,220x177,0x177
 617 before_layer_gcode =
 618 end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nG0 Y177;\nM84               ; disable motors\n
 619 extruder_offset = 0x0
 620 gcode_flavor = reprap
 621 layer_gcode =
 622 nozzle_diameter = 0.5
 623 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 624 octoprint_host =
 625 pressure_advance = 0
 626 retract_before_travel = 2
 627 retract_layer_change = 1
 628 retract_length = 5
 629 retract_length_toolchange = 10
 630 retract_lift = 0
 631 retract_restart_extra = 0
 632 retract_restart_extra_toolchange = 0
 633 retract_speed = 40
 634 start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\n
 635 toolchange_gcode =
 636 use_firmware_retraction = 0
 637 use_relative_e_distances = 0
 638 use_volumetric_e = 0
 639 vibration_limit = 0
 640 wipe = 0
 641 z_offset = 0
 642
 643 [printer:TinyBoy]
 644 bed_shape = 0x0,88x0,88x74,0x74
 645 before_layer_gcode =
 646 end_gcode = M104 S0        ; turn off temperature\nG28 X0           ; home X axis\nM84               ; disable motors\n
 647 extruder_offset = 0x0
 648 gcode_flavor = reprap
 649 layer_gcode =
 650 nozzle_diameter = 0.4
 651 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 652 octoprint_host =
 653 pressure_advance = 0
 654 retract_before_travel = 2
 655 retract_layer_change = 1
 656 retract_length = 5
 657 retract_length_toolchange = 10
 658 retract_lift = 0
 659 retract_restart_extra = 0
 660 retract_restart_extra_toolchange = 0
 661 retract_speed = 40
 662 start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
 663 toolchange_gcode =
 664 use_firmware_retraction = 0
 665 use_relative_e_distances = 0
 666 use_volumetric_e = 0
 667 vibration_limit = 0
 668 wipe = 0
 669 z_offset = 0
 670
 671 [printer:Toyrep]
 672 bed_shape = 0x0,125x0,125x125,0x125
 673 before_layer_gcode =
 674 end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
 675 extruder_offset = 0x0
 676 gcode_flavor = reprap
 677 layer_gcode =
 678 nozzle_diameter = 0.4
 679 octoprint_apikey =
 680 octoprint_host =
 681 pressure_advance = 0
 682 retract_before_travel = 2
 683 retract_layer_change = 1
 684 retract_length = 0
 685 retract_length_toolchange = 3
 686 retract_lift = 0
 687 retract_restart_extra = 0
 688 retract_restart_extra_toolchange = 0
 689 retract_speed = 10
 690 start_gcode = \n
 691 toolchange_gcode =
 692 use_firmware_retraction = 0
 693 use_relative_e_distances = 0
 694 use_volumetric_e = 0
 695 vibration_limit = 0
 696 wipe = 0
 697 z_offset = 0
 698
 699 [printer:prusa i3]
 700 bed_shape = 0x0,190x0,190x220,0x220
 701 before_layer_gcode =
 702 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n
 703 extruder_offset = 0x0
 704 gcode_flavor = reprap
 705 layer_gcode =
 706 nozzle_diameter = 0.4
 707 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 708 octoprint_host =
 709 pressure_advance = 0
 710 retract_before_travel = 2
 711 retract_layer_change = 0
 712 retract_length = 3
 713 retract_length_toolchange = 10
 714 retract_lift = 0
 715 retract_restart_extra = 0
 716 retract_restart_extra_toolchange = 0
 717 retract_speed = 40
 718 start_gcode = G28 Z            ; home Z\n;G0 Z1            ; lift Z\nG28 X Y         ; home X Y\nG0         Y40 ; clab move
 719 toolchange_gcode = M83 ; turn on relative movement for extruder  \nG1 E-5  ; retract filament 5mm  \nG1 X10 Y10 Z4.000000  ; home X and Y axis leave Z at current height  \nM84 E ; release extruder stepper motor from 'holding' position  \n@pause ; pause print!  \nG1 E0 ; reset extruder, ready to push out plastic again  \nM82 ; set extruder movement back to absolute ready for next layer
 720 use_firmware_retraction = 1
 721 use_relative_e_distances = 0
 722 use_volumetric_e = 0
 723 vibration_limit = 0
 724 wipe = 0
 725 z_offset = 0
 726
 727 [settings]
 728 autocenter = 1
 729 mode = expert