RepRap%2FConfigs%2FSlic3r%2FEnno.ini.mw

   1 # generated by Slic3r 1.2.9 on Wed Jan 20 22:30:31 2016
   2
   3 [filament:Enno ABS grün]
   4 bed_temperature = 0
   5 bridge_fan_speed = 0
   6 cooling = 1
   7 disable_fan_first_layers = 0
   8 extrusion_multiplier = 1
   9 fan_always_on = 1
  10 fan_below_layer_time = 60
  11 filament_colour = #63FF35
  12 filament_diameter = 2.8
  13 first_layer_bed_temperature = 0
  14 first_layer_temperature = 250
  15 max_fan_speed = 0
  16 min_fan_speed = 0
  17 min_print_speed = 5
  18 slowdown_below_layer_time = 15
  19 temperature = 250
  20
  21 [filament:Stratom0 ABS Neu]
  22 bed_temperature = 0
  23 bridge_fan_speed = 0
  24 cooling = 1
  25 disable_fan_first_layers = 0
  26 extrusion_multiplier = 1
  27 fan_always_on = 0
  28 fan_below_layer_time = 60
  29 filament_colour = #000000
  30 filament_diameter = 1.7
  31 first_layer_bed_temperature = 0
  32 first_layer_temperature = 250
  33 max_fan_speed = 0
  34 min_fan_speed = 0
  35 min_print_speed = 5
  36 slowdown_below_layer_time = 15
  37 temperature = 240
  38
  39 [filament:Stratum0 PLA Neu]
  40 bed_temperature = 50
  41 bridge_fan_speed = 100
  42 cooling = 1
  43 disable_fan_first_layers = 1
  44 extrusion_multiplier = 1
  45 fan_always_on = 1
  46 fan_below_layer_time = 60
  47 filament_colour = #35E1FF
  48 filament_diameter = 1.7
  49 first_layer_bed_temperature = 50
  50 first_layer_temperature = 180
  51 max_fan_speed = 100
  52 min_fan_speed = 35
  53 min_print_speed = 5
  54 slowdown_below_layer_time = 15
  55 temperature = 180
  56
  57 [presets]
  58 filament = Stratom0 ABS Neu.ini
  59 print = Stratum0 20 Neu.ini
  60 printer = Stratum0 Neu.ini
  61
  62 [print:Stratum0 20 Neu]
  63 avoid_crossing_perimeters = 0
  64 bottom_solid_layers = 3
  65 bridge_acceleration = 0
  66 bridge_flow_ratio = 1
  67 bridge_speed = 40
  68 brim_width = 0
  69 complete_objects = 0
  70 default_acceleration = 0
  71 dont_support_bridges = 1
  72 external_fill_pattern = rectilinear
  73 external_perimeter_extrusion_width = 0
  74 external_perimeter_speed = 20%
  75 external_perimeters_first = 0
  76 extra_perimeters = 1
  77 extruder_clearance_height = 20
  78 extruder_clearance_radius = 20
  79 extrusion_width = 0
  80 fill_angle = 45
  81 fill_density = 20%
  82 fill_pattern = rectilinear
  83 first_layer_acceleration = 0
  84 first_layer_extrusion_width = 200%
  85 first_layer_height = 0.35
  86 first_layer_speed = 5
  87 gap_fill_speed = 20
  88 gcode_comments = 0
  89 infill_acceleration = 0
  90 infill_every_layers = 1
  91 infill_extruder = 1
  92 infill_extrusion_width = 0
  93 infill_first = 0
  94 infill_only_where_needed = 0
  95 infill_overlap = 15%
  96 infill_speed = 0
  97 interface_shells = 0
  98 layer_height = 0.3
  99 max_print_speed = 35
 100 max_volumetric_speed = 0
 101 min_skirt_length = 5
 102 notes =
 103 only_retract_when_crossing_perimeters = 1
 104 ooze_prevention = 0
 105 output_filename_format = [input_filename_base].gcode
 106 overhangs = 1
 107 perimeter_acceleration = 0
 108 perimeter_extruder = 1
 109 perimeter_extrusion_width = 0
 110 perimeter_speed = 0
 111 perimeters = 3
 112 post_process =
 113 raft_layers = 0
 114 resolution = 0
 115 seam_position = nearest
 116 skirt_distance = 6
 117 skirt_height = 1
 118 skirts = 1
 119 small_perimeter_speed = 0
 120 solid_infill_below_area = 70
 121 solid_infill_every_layers = 0
 122 solid_infill_extruder = 1
 123 solid_infill_extrusion_width = 0
 124 solid_infill_speed = 0
 125 spiral_vase = 0
 126 standby_temperature_delta = -5
 127 support_material = 0
 128 support_material_angle = 0
 129 support_material_contact_distance = 0.2
 130 support_material_enforce_layers = 0
 131 support_material_extruder = 1
 132 support_material_extrusion_width = 0
 133 support_material_interface_extruder = 1
 134 support_material_interface_layers = 2
 135 support_material_interface_spacing = 3
 136 support_material_interface_speed = 100%
 137 support_material_pattern = rectilinear
 138 support_material_spacing = 5
 139 support_material_speed = 35
 140 support_material_threshold = 60
 141 thin_walls = 0
 142 threads = 2
 143 top_infill_extrusion_width = 0
 144 top_solid_infill_speed = 0
 145 top_solid_layers = 3
 146 travel_speed = 130
 147 xy_size_compensation = 0
 148
 149 [print:Stratum0 20 Sup Neu]
 150 avoid_crossing_perimeters = 0
 151 bottom_solid_layers = 3
 152 bridge_acceleration = 0
 153 bridge_flow_ratio = 1
 154 bridge_speed = 40
 155 brim_width = 0
 156 complete_objects = 0
 157 default_acceleration = 0
 158 dont_support_bridges = 0
 159 external_fill_pattern = rectilinear
 160 external_perimeter_extrusion_width = 0
 161 external_perimeter_speed = 20%
 162 external_perimeters_first = 0
 163 extra_perimeters = 1
 164 extruder_clearance_height = 20
 165 extruder_clearance_radius = 20
 166 extrusion_width = 0
 167 fill_angle = 45
 168 fill_density = 20%
 169 fill_pattern = rectilinear
 170 first_layer_acceleration = 0
 171 first_layer_extrusion_width = 200%
 172 first_layer_height = 0.35
 173 first_layer_speed = 5
 174 gap_fill_speed = 20
 175 gcode_comments = 0
 176 infill_acceleration = 0
 177 infill_every_layers = 1
 178 infill_extruder = 1
 179 infill_extrusion_width = 0
 180 infill_first = 0
 181 infill_only_where_needed = 0
 182 infill_overlap = 15%
 183 infill_speed = 0
 184 interface_shells = 0
 185 layer_height = 0.3
 186 max_print_speed = 35
 187 max_volumetric_speed = 0
 188 min_skirt_length = 5
 189 notes =
 190 only_retract_when_crossing_perimeters = 1
 191 ooze_prevention = 0
 192 output_filename_format = [input_filename_base].gcode
 193 overhangs = 1
 194 perimeter_acceleration = 0
 195 perimeter_extruder = 1
 196 perimeter_extrusion_width = 0
 197 perimeter_speed = 0
 198 perimeters = 3
 199 post_process =
 200 raft_layers = 0
 201 resolution = 0
 202 seam_position = nearest
 203 skirt_distance = 6
 204 skirt_height = 1
 205 skirts = 1
 206 small_perimeter_speed = 0
 207 solid_infill_below_area = 70
 208 solid_infill_every_layers = 0
 209 solid_infill_extruder = 1
 210 solid_infill_extrusion_width = 0
 211 solid_infill_speed = 0
 212 spiral_vase = 0
 213 standby_temperature_delta = -5
 214 support_material = 1
 215 support_material_angle = 0
 216 support_material_contact_distance = 0.2
 217 support_material_enforce_layers = 0
 218 support_material_extruder = 1
 219 support_material_extrusion_width = 0
 220 support_material_interface_extruder = 1
 221 support_material_interface_layers = 2
 222 support_material_interface_spacing = 2
 223 support_material_interface_speed = 100%
 224 support_material_pattern = rectilinear
 225 support_material_spacing = 5
 226 support_material_speed = 35
 227 support_material_threshold = 40
 228 thin_walls = 0
 229 threads = 2
 230 top_infill_extrusion_width = 0
 231 top_solid_infill_speed = 0
 232 top_solid_layers = 3
 233 travel_speed = 130
 234 xy_size_compensation = 0
 235
 236 [printer:Stratum0 Bed ON Neu]
 237 bed_shape = 0x0,200x0,200x177,0x177
 238 before_layer_gcode =
 239 end_gcode = M104 S0        ; turn off temperature\nG28 X0           ; home X axis\nG0 Y177         ; moving Bed out\nM84               ; disable motors\n
 240 extruder_offset = 0x0
 241 gcode_flavor = reprap
 242 layer_gcode =
 243 nozzle_diameter = 0.5
 244 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 245 octoprint_host = rapsberry:5000
 246 pressure_advance = 0
 247 retract_before_travel = 2
 248 retract_layer_change = 1
 249 retract_length = 5
 250 retract_length_toolchange = 10
 251 retract_lift = 0
 252 retract_restart_extra = 0
 253 retract_restart_extra_toolchange = 0
 254 retract_speed = 40
 255 start_gcode = G28 Z            ; home Z\nG0 Z10          ; lift Z\nG28 X Y         ; home X Y\n
 256 toolchange_gcode =
 257 use_firmware_retraction = 0
 258 use_relative_e_distances = 0
 259 use_volumetric_e = 0
 260 vibration_limit = 0
 261 wipe = 0
 262 z_offset = 0
 263
 264 [printer:Stratum0 Neu]
 265 bed_shape = 0x0,200x0,200x177,0x177
 266 before_layer_gcode =
 267 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; Bed off\nG28 X0           ; home X axis\nG0 Y177         ; moving Bed out\nM84               ; disable motors\n
 268 extruder_offset = 0x0
 269 gcode_flavor = reprap
 270 layer_gcode =
 271 nozzle_diameter = 0.5
 272 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 273 octoprint_host = rapsberry:5000
 274 pressure_advance = 0
 275 retract_before_travel = 2
 276 retract_layer_change = 1
 277 retract_length = 5
 278 retract_length_toolchange = 10
 279 retract_lift = 0
 280 retract_restart_extra = 0
 281 retract_restart_extra_toolchange = 0
 282 retract_speed = 40
 283 start_gcode = G28 Z            ; home Z\nG0 Z10          ; lift Z\nG28 X Y         ; home X Y\n
 284 toolchange_gcode =
 285 use_firmware_retraction = 0
 286 use_relative_e_distances = 0
 287 use_volumetric_e = 0
 288 vibration_limit = 0
 289 wipe = 0
 290 z_offset = 0
 291
 292 [settings]
 293 autocenter = 1
 294 mode = expert
 295
 296 [simple]
 297 avoid_crossing_perimeters = 1
 298 bed_shape = 0x0,220x0,220x177,0x177
 299 bed_temperature = 0
 300 before_layer_gcode =
 301 bottom_solid_layers = 3
 302 bridge_acceleration = 0
 303 bridge_fan_speed = 100
 304 bridge_flow_ratio = 1
 305 bridge_speed = 60
 306 brim_width = 0
 307 complete_objects = 0
 308 cooling = 1
 309 default_acceleration = 0
 310 disable_fan_first_layers = 3
 311 dont_support_bridges = 1
 312 duplicate_distance = 6
 313 end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
 314 external_fill_pattern = rectilinear
 315 external_perimeter_extrusion_width = 0
 316 external_perimeter_speed = 50%
 317 external_perimeters_first = 0
 318 extra_perimeters = 1
 319 extruder_clearance_height = 20
 320 extruder_clearance_radius = 20
 321 extruder_offset = 0x0
 322 extrusion_axis = E
 323 extrusion_multiplier = 1
 324 extrusion_width = 0
 325 fan_always_on = 0
 326 fan_below_layer_time = 60
 327 filament_colour = #FFFFFF
 328 filament_diameter = 1
 329 fill_angle = 45
 330 fill_density = 20%
 331 fill_pattern = rectilinear
 332 first_layer_acceleration = 0
 333 first_layer_bed_temperature = 0
 334 first_layer_extrusion_width = 200%
 335 first_layer_height = 0.5
 336 first_layer_speed = 30
 337 first_layer_temperature = 245
 338 gap_fill_speed = 20
 339 gcode_arcs = 0
 340 gcode_comments = 0
 341 gcode_flavor = reprap
 342 infill_acceleration = 0
 343 infill_every_layers = 10
 344 infill_extruder = 1
 345 infill_extrusion_width = 0
 346 infill_first = 0
 347 infill_only_where_needed = 0
 348 infill_overlap = 15%
 349 infill_speed = 0
 350 interface_shells = 0
 351 layer_gcode =
 352 layer_height = 0.3
 353 max_fan_speed = 100
 354 max_print_speed = 80
 355 max_volumetric_speed = 0
 356 min_fan_speed = 35
 357 min_print_speed = 10
 358 min_skirt_length = 0
 359 notes =
 360 nozzle_diameter = 0.5
 361 octoprint_apikey =
 362 octoprint_host =
 363 only_retract_when_crossing_perimeters = 1
 364 ooze_prevention = 0
 365 output_filename_format = [input_filename_base].gcode
 366 overhangs = 1
 367 perimeter_acceleration = 0
 368 perimeter_extruder = 1
 369 perimeter_extrusion_width = 0
 370 perimeter_speed = 0
 371 perimeters = 3
 372 post_process =
 373 pressure_advance = 0
 374 raft_layers = 0
 375 resolution = 0
 376 retract_before_travel = 2
 377 retract_layer_change = 0
 378 retract_length = 2
 379 retract_length_toolchange = 10
 380 retract_lift = 0
 381 retract_restart_extra = 0
 382 retract_restart_extra_toolchange = 0
 383 retract_speed = 40
 384 seam_position = aligned
 385 skirt_distance = 6
 386 skirt_height = 1
 387 skirts = 1
 388 slowdown_below_layer_time = 5
 389 small_perimeter_speed = 15
 390 solid_infill_below_area = 70
 391 solid_infill_every_layers = 0
 392 solid_infill_extruder = 1
 393 solid_infill_extrusion_width = 0
 394 solid_infill_speed = 20
 395 spiral_vase = 0
 396 standby_temperature_delta = -5
 397 start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
 398 support_material = 0
 399 support_material_angle = 0
 400 support_material_contact_distance = 0.2
 401 support_material_enforce_layers = 0
 402 support_material_extruder = 1
 403 support_material_extrusion_width = 0
 404 support_material_interface_extruder = 1
 405 support_material_interface_layers = 3
 406 support_material_interface_spacing = 0
 407 support_material_interface_speed = 100%
 408 support_material_pattern = pillars
 409 support_material_spacing = 2.5
 410 support_material_speed = 60
 411 support_material_threshold = 0
 412 temperature = 240
 413 thin_walls = 1
 414 threads = 2
 415 toolchange_gcode =
 416 top_infill_extrusion_width = 0
 417 top_solid_infill_speed = 15
 418 top_solid_layers = 3
 419 travel_speed = 130
 420 use_firmware_retraction = 0
 421 use_relative_e_distances = 0
 422 use_volumetric_e = 0
 423 vibration_limit = 0
 424 wipe = 0
 425 xy_size_compensation = 0
 426 z_offset = 0