RepRap%2FConfigs%2FSlic3r.mw

   1 Eine Seite um (gute) Beispielkonfigkurationen zu sammeln, am besten mit Beispieldruck (Foto)
   2
   3 Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
   4
   5 ===== Von larsan =====
   6 Ursprünglich die erste Konfiguration für unseren Drucker auf Basis von {{Benutzer|DanielWillmann}}s Konfiguration.
   7
   8 Von der unten stehenden Config gibt es eine verbesserte [https://rohieb.name/stuff/stratum0/larsan-tuned.ini larsan-tuned.ini], die Rohieb gemacht hat.
   9
  10 <pre style="height:200px;overflow:scroll;">
  11 # generated by Slic3r 0.9.8-dev on Wed Nov 28 08:03:30 2012
  12 acceleration = 0
  13 bed_size = 180,200
  14 bed_temperature = 50
  15 bottom_solid_layers = 3
  16 bridge_fan_speed = 100
  17 bridge_flow_ratio = 1
  18 bridge_speed = 60
  19 brim_width = 0
  20 complete_objects =
  21 cooling =
  22 disable_fan_first_layers = 1
  23 duplicate = 1
  24 duplicate_distance = 6
  25 duplicate_grid = 1,1
  26 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
  27 external_perimeter_speed = 40%
  28 extra_perimeters = 1
  29 extruder_clearance_height = 20
  30 extruder_clearance_radius = 30
  31 extruder_offset = 0x0
  32 extrusion_axis = E
  33 extrusion_multiplier = 1
  34 extrusion_width = 0
  35 fan_always_on = 0
  36 fan_below_layer_time = 60
  37 filament_diameter = 1.75
  38 fill_angle = 0
  39 fill_density = 0.15
  40 fill_pattern = honeycomb
  41 first_layer_bed_temperature = 50
  42 first_layer_extrusion_width = 0
  43 first_layer_height = 0.27
  44 first_layer_speed = 15%
  45 first_layer_temperature = 195
  46 g0 = 0
  47 gap_fill_speed = 20
  48 gcode_arcs = 0
  49 gcode_comments = 0
  50 gcode_flavor = reprap
  51 infill_acceleration = 50
  52 infill_every_layers = 1
  53 infill_extruder = 1
  54 infill_extrusion_width = 0
  55 infill_speed = 60
  56 layer_gcode =
  57 layer_height = 0.24
  58 max_fan_speed = 100
  59 min_fan_speed = 35
  60 min_print_speed = 5
  61 min_skirt_length = 0
  62 notes = larsanconfig
  63 nozzle_diameter = 0.35
  64 only_retract_when_crossing_perimeters =
  65 output_filename_format = [input_filename_base].gcode
  66 perimeter_acceleration = 25
  67 perimeter_extruder = 1
  68 perimeter_extrusion_width = 0
  69 perimeter_speed = 50
  70 perimeters = 3
  71 post_process =
  72 print_center = 90,100
  73 randomize_start = 1
  74 retract_before_travel = 5
  75 retract_length = 2
  76 retract_length_toolchange = 3
  77 retract_lift = 0
  78 retract_restart_extra = 0.01
  79 retract_restart_extra_toolchange = 0
  80 retract_speed = 50
  81 rotate = 0
  82 scale = 1
  83 skirt_distance = 20
  84 skirt_height = 1
  85 skirts = 3
  86 slowdown_below_layer_time = 50
  87 small_perimeter_speed = 100%
  88 solid_fill_pattern = rectilinear
  89 solid_infill_below_area = 0
  90 solid_infill_every_layers = 0
  91 solid_infill_speed = 90%
  92 start_gcode = G28 ; home all axes\nM92 E820
  93 support_material =
  94 support_material_angle = 45
  95 support_material_extruder = 1
  96 support_material_extrusion_width = 0
  97 support_material_pattern = rectilinear
  98 support_material_spacing = 2
  99 support_material_speed = 60
 100 support_material_threshold = 41
 101 temperature = 185
 102 threads = 2
 103 top_solid_infill_speed = 70%
 104 top_solid_layers = 3
 105 travel_speed = 50
 106 use_relative_e_distances = 0
 107 vibration_limit = 0
 108 z_offset = 0
 109 </pre>
 110
 111 == Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ==
 112 Der erste und letzte Layer wird "normal schnell" gedruckt, die anderen doppelt so schnell. Bei dünnen Strukturen (z.B. Mate-Tags) muss man notfalls noch ein bisschen mit der Perimeteranzahl spielen.
 113 <pre style="height:200px;overflow:scroll;">
 114 # generated by Slic3r 0.9.4-dev on Fri Nov 16 20:55:02 2012
 115 acceleration = 0
 116 bed_size = 180,200
 117 bed_temperature = 60
 118 bridge_fan_speed = 100
 119 bridge_flow_ratio = 1
 120 bridge_speed = 350
 121 brim_width = 0
 122 complete_objects = 0
 123 cooling = 1
 124 disable_fan_first_layers = 1
 125 duplicate = 1
 126 duplicate_distance = 6
 127 duplicate_grid = 1,1
 128 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 129 external_perimeter_speed = 90%
 130 extra_perimeters = 1
 131 extruder_clearance_height = 20
 132 extruder_clearance_radius = 20
 133 extruder_offset = 0x0
 134 extrusion_axis = E
 135 extrusion_multiplier = 1.0
 136 extrusion_width = 0
 137 fan_always_on = 0
 138 fan_below_layer_time = 60
 139 filament_diameter = 1.75
 140 fill_angle = 0
 141 fill_density = 0.2
 142 fill_pattern = rectilinear
 143 first_layer_bed_temperature = 60
 144 first_layer_extrusion_width = 0
 145 first_layer_height = 100%
 146 first_layer_speed = 20%
 147 first_layer_temperature = 195
 148 g0 = 0
 149 gcode_arcs = 0
 150 gcode_comments = 0
 151 gcode_flavor = reprap
 152 infill_acceleration = 50
 153 infill_every_layers = 1
 154 infill_extruder = 1
 155 infill_extrusion_width = 0
 156 infill_speed = 120
 157 layer_gcode =
 158 layer_height = 0.25
 159 max_fan_speed = 100
 160 min_fan_speed = 35
 161 min_print_speed = 10
 162 notes = Used for Mate name tag
 163 nozzle_diameter = 0.35
 164 only_retract_when_crossing_perimeters = 0
 165 output_filename_format = [input_filename_base].gcode
 166 perimeter_acceleration = 25
 167 perimeter_extruder = 1
 168 perimeter_extrusion_width = 0
 169 perimeter_speed = 100
 170 perimeters = 2
 171 post_process =
 172 print_center = 90,100
 173 randomize_start = 1
 174 retract_before_travel = 4
 175 retract_length = 4
 176 retract_length_toolchange = 3
 177 retract_lift = 0.5
 178 retract_restart_extra = 0
 179 retract_restart_extra_toolchange = 0
 180 retract_speed = 150
 181 rotate = 0
 182 scale = 1
 183 skirt_distance = 10
 184 skirt_height = 1
 185 skirts = 2
 186 slowdown_below_layer_time = 60
 187 small_perimeter_speed = 80%
 188 solid_fill_pattern = rectilinear
 189 solid_infill_below_area = 0
 190 solid_infill_every_layers = 0
 191 solid_infill_speed = 100%
 192 solid_layers = 3
 193 start_gcode = G28 ; home all axes\nM92 E820
 194 support_material = 1
 195 support_material_angle = 45
 196 support_material_extruder = 1
 197 support_material_extrusion_width = 0
 198 support_material_pattern = rectilinear
 199 support_material_spacing = 3
 200 support_material_threshold = 45
 201 temperature = 185
 202 threads = 3
 203 top_solid_infill_speed = 50%
 204 travel_speed = 140
 205 use_relative_e_distances = 0
 206 z_offset = 0.22
 207 </pre>
 208
 209 == von Chrissi^ ==
 210 * Nette Konfiguration zum Drucken von allem möglichen.
 211 * First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
 212 * First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
 213 <pre  style="height:200px;overflow:scroll;">
 214 # generated by Slic3r 0.9.3 on Tue Nov  6 21:53:43 2012
 215 acceleration = 0
 216 bed_size = 180,200
 217 bed_temperature = 60
 218 bridge_fan_speed = 100
 219 bridge_flow_ratio = 1.05
 220 bridge_speed = 60
 221 brim_width = 0
 222 complete_objects =
 223 cooling = 1
 224 disable_fan_first_layers = 1
 225 duplicate = 1
 226 duplicate_distance = 6
 227 duplicate_grid = 1,1
 228 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 229 external_perimeter_speed = 100%
 230 extra_perimeters = 1
 231 extruder_clearance_height = 20
 232 extruder_clearance_radius = 30
 233 extruder_offset = 0x0
 234 extrusion_axis = E
 235 extrusion_multiplier = 1
 236 extrusion_width = 100%
 237 fan_always_on = 0
 238 fan_below_layer_time = 60
 239 filament_diameter = 1.75
 240 fill_angle = 45
 241 fill_density = 0.1
 242 fill_pattern = rectilinear
 243 first_layer_bed_temperature = 60
 244 first_layer_extrusion_width = 112%
 245 first_layer_height = 95%
 246 first_layer_speed = 15%
 247 first_layer_temperature = 200
 248 g0 = 0
 249 gcode_arcs = 0
 250 gcode_comments = 0
 251 gcode_flavor = reprap
 252 infill_acceleration = 50
 253 infill_every_layers = 1
 254 infill_extruder = 1
 255 infill_extrusion_width = 120%
 256 infill_speed = 60
 257 layer_gcode =
 258 layer_height = 0.3
 259 max_fan_speed = 100
 260 min_fan_speed = 35
 261 min_print_speed = 5
 262 notes = larsanconfig
 263 nozzle_diameter = 0.35
 264 only_retract_when_crossing_perimeters = 1
 265 output_filename_format = [timestamp]_[input_filename_base].gcode
 266 perimeter_acceleration = 25
 267 perimeter_extruder = 1
 268 perimeter_extrusion_width = 0
 269 perimeter_speed = 60
 270 perimeters = 2
 271 post_process =
 272 print_center = 120,120
 273 randomize_start = 1
 274 retract_before_travel = 4
 275 retract_length = 2
 276 retract_length_toolchange = 3
 277 retract_lift = 0
 278 retract_restart_extra = 0
 279 retract_restart_extra_toolchange = 0
 280 retract_speed = 50
 281 rotate = 0
 282 scale = 1
 283 skirt_distance = 10
 284 skirt_height = 1
 285 skirts = 3
 286 slowdown_below_layer_time = 50
 287 small_perimeter_speed = 50%
 288 solid_fill_pattern = rectilinear
 289 solid_infill_below_area = 0
 290 solid_infill_every_layers = 0
 291 solid_infill_speed = 100%
 292 solid_layers = 3
 293 start_gcode = G28 ; home all axes\nM92 E820
 294 support_material = 1
 295 support_material_angle = 45
 296 support_material_extruder = 1
 297 support_material_extrusion_width = 160%
 298 support_material_pattern = rectilinear
 299 support_material_spacing = 2
 300 support_material_threshold = 40
 301 temperature = 205
 302 threads = 2
 303 top_solid_infill_speed = 40%
 304 travel_speed = 90
 305 use_relative_e_distances = 0
 306 z_offset = 0
 307 </pre>
 308
 309 == Gelbes Filament ==
 310 * Ursprünglich für [[Reprap/Parent]] erstellt
 311 * Damit gedruckt: der letzte gelbe frame-vertex für den Drucker
 312 * etwas wärmer (195°C)
 313 * 0.22 mm z-offeset
 314 <pre style="height:200px;overflow:scroll;">
 315 acceleration = 0
 316 bed_size = 170,170
 317 bed_temperature = 60
 318 bridge_fan_speed = 100
 319 bridge_flow_ratio = 1
 320 bridge_speed = 30
 321 brim_width = 0
 322 complete_objects = 0
 323 cooling = 1
 324 disable_fan_first_layers = 1
 325 duplicate = 1
 326 duplicate_distance = 6
 327 duplicate_grid = 1,1
 328 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 329 external_perimeter_speed = 90%
 330 extra_perimeters = 1
 331 extruder_clearance_height = 20
 332 extruder_clearance_radius = 20
 333 extrusion_axis = E
 334 extrusion_multiplier = 1
 335 extrusion_width = 0
 336 fan_always_on = 0
 337 fan_below_layer_time = 60
 338 filament_diameter = 3
 339 fill_angle = 45
 340 fill_density = 0.15
 341 fill_pattern = rectilinear
 342 first_layer_bed_temperature = 60
 343 first_layer_extrusion_width = 0
 344 first_layer_height = 115%
 345 first_layer_speed = 80%
 346 first_layer_temperature = 200
 347 g0 = 0
 348 gcode_arcs = 0
 349 gcode_comments = 0
 350 gcode_flavor = reprap
 351 infill_acceleration = 50
 352 infill_every_layers = 1
 353 infill_extruder = 1
 354 infill_extrusion_width = 0
 355 infill_speed = 40
 356 layer_gcode =
 357 layer_height = 0.28
 358 max_fan_speed = 100
 359 min_fan_speed = 35
 360 min_print_speed = 10
 361 notes = Used for Mate name tag
 362 nozzle_diameter = 0.35
 363 output_filename_format = [input_filename_base].gcode
 364 perimeter_acceleration = 25
 365 perimeter_speed = 30
 366 perimeters = 3
 367 perimeters_extruder = 1
 368 perimeters_extrusion_width = 0
 369 post_process =
 370 print_center = 50,27
 371 randomize_start = 1
 372 retract_before_travel = 4
 373 retract_length = 3
 374 retract_lift = 0.4
 375 retract_restart_extra = 0
 376 retract_speed = 30
 377 rotate = 0
 378 scale = 1
 379 skirt_distance = 6
 380 skirt_height = 1
 381 skirts = 3
 382 slowdown_below_layer_time = 60
 383 small_perimeter_speed = 30
 384 solid_fill_pattern = rectilinear
 385 solid_infill_speed = 40
 386 solid_layers = 3
 387 start_gcode = G28 ; home all axes\nM92 E820
 388 support_material =
 389 support_material_angle = 45
 390 support_material_extruder = 1
 391 support_material_extrusion_width = 0
 392 support_material_pattern = rectilinear
 393 support_material_spacing = 2.5
 394 support_material_threshold = 45
 395 temperature = 195
 396 threads = 2
 397 top_solid_infill_speed = 40
 398 travel_speed = 130
 399 use_relative_e_distances = 0
 400 z_offset = 0.22
 401 </pre>
 402
 403 [[Kategorie:RepRap]]