RepRap%2FConfigs%2FSlic3r.mw

   1 Eine Seite um (gute) Beispielkonfigkurationen zu sammeln, am besten mit Beispieldruck (Foto)
   2
   3 Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
   4
   5 === aktuelle configs ===
   6 Der Drucker hat sich verändert, dementsprechend haben sich auch die configs geändert.
   7 Beispielsweise haben wir jetzt 0.5 mm Düsen an den beiden Hot Ends, nicht mehr 0.35 mm.
   8 Dazu kommt, dass das homing konstruktionsbedingt außerhalb des hot beds stattfindet, mit diesem Start-gcode wird das ausgeglichen:
   9  G28 X0 Y0 ; home X and Y
  10  G0 X60; move to X60
  11  G92 X0; set postition to X=0
  12  G28 Z0; home Z
  13 Das, oder etwas Ähnliches sollte in allen configs mit drin sein.
  14
  15 Eine funktionierende, aber noch nicht sehr fein justierte config ist diese:
  16 ==== larsan ====
  17 <pre style="height:200px;overflow-y:scroll;">
  18 # generated by Slic3r 0.9.10 on Sun Sep 29 22:51:39 2013
  19 avoid_crossing_perimeters = 0
  20 bed_size = 190,190
  21 bed_temperature = 50
  22 bottom_solid_layers = 3
  23 bridge_acceleration = 0
  24 bridge_fan_speed = 100
  25 bridge_flow_ratio = 1
  26 bridge_speed = 60
  27 brim_width = 0
  28 complete_objects = 1
  29 cooling = 1
  30 default_acceleration = 0
  31 disable_fan_first_layers = 1
  32 duplicate = 1
  33 duplicate_distance = 6
  34 duplicate_grid = 1,1
  35 end_gcode = M104 S0 ; turn off extruder temperature\n;M140 S0 ; turn off bed temperature; currently disabled\nG0 X0    ; move X axis to 0\nG92 Z0 E5 ;define current point as Z0 E5\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y198 F6000 ; drive print table all the way out\nM84     ; disable motors
  36 external_perimeter_speed = 70%
  37 external_perimeters_first = 0
  38 extra_perimeters = 1
  39 extruder_clearance_height = 1
  40 extruder_clearance_radius = 30
  41 extruder_offset = 0x0
  42 extrusion_axis = E
  43 extrusion_multiplier = 1
  44 extrusion_width = 180%
  45 fan_always_on = 0
  46 fan_below_layer_time = 60
  47 filament_diameter = 1.75
  48 fill_angle = 45
  49 fill_density = 0.3
  50 fill_pattern = honeycomb
  51 first_layer_bed_temperature = 50
  52 first_layer_extrusion_width = 0
  53 first_layer_height = 0.25
  54 first_layer_speed = 30%
  55 first_layer_temperature = 200
  56 g0 = 0
  57 gap_fill_speed = 15
  58 gcode_arcs = 0
  59 gcode_comments = 0
  60 gcode_flavor = reprap
  61 infill_acceleration = 0
  62 infill_every_layers = 1
  63 infill_extruder = 1
  64 infill_extrusion_width = 0
  65 infill_first = 0
  66 infill_only_where_needed = 0
  67 infill_speed = 60
  68 layer_gcode =
  69 layer_height = 0.25
  70 max_fan_speed = 100
  71 min_fan_speed = 35
  72 min_print_speed = 5
  73 min_skirt_length = 0
  74 notes = larsanconfig
  75 nozzle_diameter = 0.5
  76 only_retract_when_crossing_perimeters = 1
  77 output_filename_format = [input_filename_base].gcode
  78 perimeter_acceleration = 0
  79 perimeter_extruder = 1
  80 perimeter_extrusion_width = 0
  81 perimeter_speed = 80
  82 perimeters = 3
  83 post_process =
  84 print_center = 90,60
  85 raft_layers = 0
  86 randomize_start = 0
  87 resolution = 0
  88 retract_before_travel = 2
  89 retract_layer_change = 1
  90 retract_length = 2
  91 retract_length_toolchange = 10
  92 retract_lift = 0
  93 retract_restart_extra = 0
  94 retract_restart_extra_toolchange = 0
  95 retract_speed = 35
  96 rotate = 0
  97 scale = 1
  98 skirt_distance = 10
  99 skirt_height = 1
 100 skirts = 3
 101 slowdown_below_layer_time = 30
 102 small_perimeter_speed = 50
 103 solid_fill_pattern = rectilinear
 104 solid_infill_below_area = 40
 105 solid_infill_every_layers = 0
 106 solid_infill_extrusion_width = 0
 107 solid_infill_speed = 80
 108 spiral_vase = 0
 109 start_gcode = G28 X0 Y0 ; home X and Y\nG0 X60; move to X60\nG92 X0; set postition to X=0\nG28 Z0; home Z
 110 support_material = 0
 111 support_material_angle = 0
 112 support_material_enforce_layers = 0
 113 support_material_extruder = 1
 114 support_material_extrusion_width = 0
 115 support_material_interface_layers = 0
 116 support_material_interface_spacing = 0
 117 support_material_pattern = rectilinear
 118 support_material_spacing = 2.5
 119 support_material_speed = 65
 120 support_material_threshold = 0
 121 temperature = 195
 122 threads = 1
 123 toolchange_gcode =
 124 top_infill_extrusion_width = 0
 125 top_solid_infill_speed = 60
 126 top_solid_layers = 3
 127 travel_speed = 80
 128 use_relative_e_distances = 0
 129 vibration_limit = 0
 130 wipe = 0
 131 z_offset = 0
 132 </pre>
 133
 134 ==== Kasalehlia ====
 135 etwas auf den neuen Drucker angepasst. Start G-Code und neuer Lüfter am Druckkopf sind berücksichtigt.
 136
 137 Printer:
 138 <pre style="height:200px;overflow-y:scroll;">
 139 bed_size = 200,200
 140 end_gcode = M107; fan off\nM104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
 141 extruder_offset = 0x0
 142 gcode_flavor = reprap
 143 layer_gcode =
 144 nozzle_diameter = 0.5
 145 print_center = 100,80
 146 retract_before_travel = 2
 147 retract_layer_change = 1
 148 retract_length = 1
 149 retract_length_toolchange = 10
 150 retract_lift = 0
 151 retract_restart_extra = 0
 152 retract_restart_extra_toolchange = 0
 153 retract_speed = 30
 154 start_gcode = G28 X0 Y0 ; home X and Y\nG0 X60; move to X60\nG92 X0; set postition to X=0\nG28 Z0; home Z\nM106; fan on
 155 toolchange_gcode =
 156 use_firmware_retraction = 0
 157 use_relative_e_distances = 0
 158 vibration_limit = 0
 159 wipe = 0
 160 z_offset = 0
 161 </pre>
 162
 163 Normales PLA:
 164 <pre style="height:200px;overflow-y:scroll;">
 165 bed_temperature = 50
 166 bridge_fan_speed = 100
 167 cooling = 1
 168 disable_fan_first_layers = 1
 169 extrusion_multiplier = 1
 170 fan_always_on = 0
 171 fan_below_layer_time = 60
 172 filament_diameter = 1.75
 173 first_layer_bed_temperature = 55
 174 first_layer_temperature = 200
 175 max_fan_speed = 100
 176 min_fan_speed = 35
 177 min_print_speed = 10
 178 slowdown_below_layer_time = 30
 179 temperature = 195
 180 </pre>
 181
 182 Holz PLA:
 183 <pre style="height:200px;overflow-y:scroll;">
 184 bed_temperature = 50
 185 bridge_fan_speed = 100
 186 cooling = 1
 187 disable_fan_first_layers = 1
 188 extrusion_multiplier = 1
 189 fan_always_on = 0
 190 fan_below_layer_time = 60
 191 filament_diameter = 1.75
 192 first_layer_bed_temperature = 55
 193 first_layer_temperature = 210
 194 max_fan_speed = 100
 195 min_fan_speed = 35
 196 min_print_speed = 10
 197 slowdown_below_layer_time = 30
 198 temperature = 210
 199 </pre>
 200
 201 Matetags oder andere Filigranere Dinge:
 202 <pre style="height:200px;overflow-y:scroll;">
 203 avoid_crossing_perimeters = 0
 204 bottom_solid_layers = 3
 205 bridge_acceleration = 0
 206 bridge_flow_ratio = 1
 207 bridge_speed = 60
 208 brim_width = 3
 209 complete_objects = 0
 210 default_acceleration = 0
 211 external_perimeter_speed = 70%
 212 external_perimeters_first = 0
 213 extra_perimeters = 1
 214 extruder_clearance_height = 20
 215 extruder_clearance_radius = 20
 216 extrusion_width = 0
 217 fill_angle = 45
 218 fill_density = 1
 219 fill_pattern = rectilinear
 220 first_layer_acceleration = 0
 221 first_layer_extrusion_width = 200%
 222 first_layer_height = 0.22
 223 first_layer_speed = 30%
 224 gap_fill_speed = 20
 225 gcode_comments = 0
 226 infill_acceleration = 0
 227 infill_every_layers = 1
 228 infill_extruder = 1
 229 infill_extrusion_width = 0
 230 infill_first = 0
 231 infill_only_where_needed = 0
 232 infill_speed = 60
 233 layer_height = 0.22
 234 min_skirt_length = 0
 235 notes =
 236 only_retract_when_crossing_perimeters = 1
 237 ooze_prevention = 0
 238 output_filename_format = [input_filename_base].gcode
 239 overhangs = 1
 240 perimeter_acceleration = 0
 241 perimeter_extruder = 1
 242 perimeter_extrusion_width = 0
 243 perimeter_speed = 50
 244 perimeters = 3
 245 post_process =
 246 raft_layers = 0
 247 randomize_start = 0
 248 resolution = 0
 249 skirt_distance = 6
 250 skirt_height = 1
 251 skirts = 2
 252 small_perimeter_speed = 40
 253 solid_fill_pattern = rectilinear
 254 solid_infill_below_area = 70
 255 solid_infill_every_layers = 0
 256 solid_infill_extrusion_width = 0
 257 solid_infill_speed = 60
 258 spiral_vase = 0
 259 standby_temperature_delta = -5
 260 start_perimeters_at_concave_points = 0
 261 start_perimeters_at_non_overhang = 0
 262 support_material = 0
 263 support_material_angle = 0
 264 support_material_enforce_layers = 0
 265 support_material_extruder = 1
 266 support_material_extrusion_width = 0
 267 support_material_interface_extruder = 1
 268 support_material_interface_layers = 0
 269 support_material_interface_spacing = 0
 270 support_material_pattern = rectilinear
 271 support_material_spacing = 2.5
 272 support_material_speed = 60
 273 support_material_threshold = 0
 274 thin_walls = 1
 275 threads = 2
 276 top_infill_extrusion_width = 0
 277 top_solid_infill_speed = 50
 278 top_solid_layers = 5
 279 travel_speed = 130
 280 </pre>
 281
 282 Solide Teile:
 283 <pre style="height:200px;overflow-y:scroll;">
 284 avoid_crossing_perimeters = 0
 285 bottom_solid_layers = 3
 286 bridge_acceleration = 0
 287 bridge_flow_ratio = 1
 288 bridge_speed = 60
 289 brim_width = 3
 290 complete_objects = 0
 291 default_acceleration = 0
 292 external_perimeter_speed = 70%
 293 external_perimeters_first = 0
 294 extra_perimeters = 1
 295 extruder_clearance_height = 20
 296 extruder_clearance_radius = 20
 297 extrusion_width = 0
 298 fill_angle = 45
 299 fill_density = 0.3
 300 fill_pattern = honeycomb
 301 first_layer_acceleration = 0
 302 first_layer_extrusion_width = 200%
 303 first_layer_height = 0.22
 304 first_layer_speed = 30%
 305 gap_fill_speed = 20
 306 gcode_comments = 0
 307 infill_acceleration = 0
 308 infill_every_layers = 1
 309 infill_extruder = 1
 310 infill_extrusion_width = 0
 311 infill_first = 0
 312 infill_only_where_needed = 0
 313 infill_speed = 60
 314 layer_height = 0.22
 315 min_skirt_length = 0
 316 notes =
 317 only_retract_when_crossing_perimeters = 1
 318 ooze_prevention = 0
 319 output_filename_format = [input_filename_base].gcode
 320 overhangs = 1
 321 perimeter_acceleration = 0
 322 perimeter_extruder = 1
 323 perimeter_extrusion_width = 0
 324 perimeter_speed = 50
 325 perimeters = 3
 326 post_process =
 327 raft_layers = 0
 328 randomize_start = 0
 329 resolution = 0
 330 skirt_distance = 6
 331 skirt_height = 1
 332 skirts = 2
 333 small_perimeter_speed = 40
 334 solid_fill_pattern = concentric
 335 solid_infill_below_area = 70
 336 solid_infill_every_layers = 0
 337 solid_infill_extrusion_width = 0
 338 solid_infill_speed = 60
 339 spiral_vase = 0
 340 standby_temperature_delta = -5
 341 start_perimeters_at_concave_points = 0
 342 start_perimeters_at_non_overhang = 0
 343 support_material = 0
 344 support_material_angle = 0
 345 support_material_enforce_layers = 0
 346 support_material_extruder = 1
 347 support_material_extrusion_width = 0
 348 support_material_interface_extruder = 1
 349 support_material_interface_layers = 0
 350 support_material_interface_spacing = 0
 351 support_material_pattern = rectilinear
 352 support_material_spacing = 2.5
 353 support_material_speed = 60
 354 support_material_threshold = 0
 355 thin_walls = 1
 356 threads = 2
 357 top_infill_extrusion_width = 0
 358 top_solid_infill_speed = 50
 359 top_solid_layers = 5
 360 travel_speed = 130
 361 </pre>
 362
 363 === alte configs ===
 364
 365 ==== Von larsan ====
 366 Ursprünglich die erste Konfiguration für unseren Drucker auf Basis von {{Benutzer|DanielWillmann}}s Konfiguration.
 367
 368 Von der unten stehenden Config gibt es eine verbesserte [https://rohieb.name/stuff/stratum0/larsan-tuned.ini larsan-tuned.ini], die Rohieb gemacht hat.
 369
 370 <pre style="height:200px;overflow:scroll;">
 371 # generated by Slic3r 0.9.8-dev on Wed Nov 28 08:03:30 2012
 372 acceleration = 0
 373 bed_size = 180,200
 374 bed_temperature = 50
 375 bottom_solid_layers = 3
 376 bridge_fan_speed = 100
 377 bridge_flow_ratio = 1
 378 bridge_speed = 60
 379 brim_width = 0
 380 complete_objects =
 381 cooling =
 382 disable_fan_first_layers = 1
 383 duplicate = 1
 384 duplicate_distance = 6
 385 duplicate_grid = 1,1
 386 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 387 external_perimeter_speed = 40%
 388 extra_perimeters = 1
 389 extruder_clearance_height = 20
 390 extruder_clearance_radius = 30
 391 extruder_offset = 0x0
 392 extrusion_axis = E
 393 extrusion_multiplier = 1
 394 extrusion_width = 0
 395 fan_always_on = 0
 396 fan_below_layer_time = 60
 397 filament_diameter = 1.75
 398 fill_angle = 0
 399 fill_density = 0.15
 400 fill_pattern = honeycomb
 401 first_layer_bed_temperature = 50
 402 first_layer_extrusion_width = 0
 403 first_layer_height = 0.27
 404 first_layer_speed = 15%
 405 first_layer_temperature = 195
 406 g0 = 0
 407 gap_fill_speed = 20
 408 gcode_arcs = 0
 409 gcode_comments = 0
 410 gcode_flavor = reprap
 411 infill_acceleration = 50
 412 infill_every_layers = 1
 413 infill_extruder = 1
 414 infill_extrusion_width = 0
 415 infill_speed = 60
 416 layer_gcode =
 417 layer_height = 0.24
 418 max_fan_speed = 100
 419 min_fan_speed = 35
 420 min_print_speed = 5
 421 min_skirt_length = 0
 422 notes = larsanconfig
 423 nozzle_diameter = 0.35
 424 only_retract_when_crossing_perimeters =
 425 output_filename_format = [input_filename_base].gcode
 426 perimeter_acceleration = 25
 427 perimeter_extruder = 1
 428 perimeter_extrusion_width = 0
 429 perimeter_speed = 50
 430 perimeters = 3
 431 post_process =
 432 print_center = 90,100
 433 randomize_start = 1
 434 retract_before_travel = 5
 435 retract_length = 2
 436 retract_length_toolchange = 3
 437 retract_lift = 0
 438 retract_restart_extra = 0.01
 439 retract_restart_extra_toolchange = 0
 440 retract_speed = 50
 441 rotate = 0
 442 scale = 1
 443 skirt_distance = 20
 444 skirt_height = 1
 445 skirts = 3
 446 slowdown_below_layer_time = 50
 447 small_perimeter_speed = 100%
 448 solid_fill_pattern = rectilinear
 449 solid_infill_below_area = 0
 450 solid_infill_every_layers = 0
 451 solid_infill_speed = 90%
 452 start_gcode = G28 ; home all axes\nM92 E820
 453 support_material =
 454 support_material_angle = 45
 455 support_material_extruder = 1
 456 support_material_extrusion_width = 0
 457 support_material_pattern = rectilinear
 458 support_material_spacing = 2
 459 support_material_speed = 60
 460 support_material_threshold = 41
 461 temperature = 185
 462 threads = 2
 463 top_solid_infill_speed = 70%
 464 top_solid_layers = 3
 465 travel_speed = 50
 466 use_relative_e_distances = 0
 467 vibration_limit = 0
 468 z_offset = 0
 469 </pre>
 470
 471 ==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
 472 Der erste und letzte Layer wird "normal schnell" gedruckt, die anderen doppelt so schnell. Bei dünnen Strukturen (z.B. Mate-Tags) muss man notfalls noch ein bisschen mit der Perimeteranzahl spielen.
 473 <pre style="height:200px;overflow:scroll;">
 474 # generated by Slic3r 0.9.4-dev on Fri Nov 16 20:55:02 2012
 475 acceleration = 0
 476 bed_size = 180,200
 477 bed_temperature = 60
 478 bridge_fan_speed = 100
 479 bridge_flow_ratio = 1
 480 bridge_speed = 350
 481 brim_width = 0
 482 complete_objects = 0
 483 cooling = 1
 484 disable_fan_first_layers = 1
 485 duplicate = 1
 486 duplicate_distance = 6
 487 duplicate_grid = 1,1
 488 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 489 external_perimeter_speed = 90%
 490 extra_perimeters = 1
 491 extruder_clearance_height = 20
 492 extruder_clearance_radius = 20
 493 extruder_offset = 0x0
 494 extrusion_axis = E
 495 extrusion_multiplier = 1.0
 496 extrusion_width = 0
 497 fan_always_on = 0
 498 fan_below_layer_time = 60
 499 filament_diameter = 1.75
 500 fill_angle = 0
 501 fill_density = 0.2
 502 fill_pattern = rectilinear
 503 first_layer_bed_temperature = 60
 504 first_layer_extrusion_width = 0
 505 first_layer_height = 100%
 506 first_layer_speed = 20%
 507 first_layer_temperature = 195
 508 g0 = 0
 509 gcode_arcs = 0
 510 gcode_comments = 0
 511 gcode_flavor = reprap
 512 infill_acceleration = 50
 513 infill_every_layers = 1
 514 infill_extruder = 1
 515 infill_extrusion_width = 0
 516 infill_speed = 120
 517 layer_gcode =
 518 layer_height = 0.25
 519 max_fan_speed = 100
 520 min_fan_speed = 35
 521 min_print_speed = 10
 522 notes = Used for Mate name tag
 523 nozzle_diameter = 0.35
 524 only_retract_when_crossing_perimeters = 0
 525 output_filename_format = [input_filename_base].gcode
 526 perimeter_acceleration = 25
 527 perimeter_extruder = 1
 528 perimeter_extrusion_width = 0
 529 perimeter_speed = 100
 530 perimeters = 2
 531 post_process =
 532 print_center = 90,100
 533 randomize_start = 1
 534 retract_before_travel = 4
 535 retract_length = 4
 536 retract_length_toolchange = 3
 537 retract_lift = 0.5
 538 retract_restart_extra = 0
 539 retract_restart_extra_toolchange = 0
 540 retract_speed = 150
 541 rotate = 0
 542 scale = 1
 543 skirt_distance = 10
 544 skirt_height = 1
 545 skirts = 2
 546 slowdown_below_layer_time = 60
 547 small_perimeter_speed = 80%
 548 solid_fill_pattern = rectilinear
 549 solid_infill_below_area = 0
 550 solid_infill_every_layers = 0
 551 solid_infill_speed = 100%
 552 solid_layers = 3
 553 start_gcode = G28 ; home all axes\nM92 E820
 554 support_material = 1
 555 support_material_angle = 45
 556 support_material_extruder = 1
 557 support_material_extrusion_width = 0
 558 support_material_pattern = rectilinear
 559 support_material_spacing = 3
 560 support_material_threshold = 45
 561 temperature = 185
 562 threads = 3
 563 top_solid_infill_speed = 50%
 564 travel_speed = 140
 565 use_relative_e_distances = 0
 566 z_offset = 0.22
 567 </pre>
 568
 569 ==== Für Mate-Tags ====
 570 Konfiguration für Mate-Tags
 571 <pre style="height:200px;overflow:scroll;">
 572 # generated by Slic3r 0.9.9-dev on Fri Jun  7 23:59:05 2013
 573 avoid_crossing_perimeters = 1
 574 bed_size = 180,200
 575 bed_temperature = 50
 576 bottom_solid_layers = 3
 577 bridge_acceleration = 0
 578 bridge_fan_speed = 100
 579 bridge_flow_ratio = 1
 580 bridge_speed = 50
 581 brim_width = 0
 582 complete_objects = 1
 583 cooling =
 584 default_acceleration = 0
 585 disable_fan_first_layers = 1
 586 duplicate = 1
 587 duplicate_distance = 6
 588 duplicate_grid = 1,1
 589 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 590 external_perimeter_speed = 50%
 591 external_perimeters_first = 0
 592 extra_perimeters =
 593 extruder_clearance_height = 36
 594 extruder_clearance_radius = 40
 595 extruder_offset = 0x0
 596 extrusion_axis = E
 597 extrusion_multiplier = 1.1
 598 extrusion_width = 0
 599 fan_always_on = 0
 600 fan_below_layer_time = 60
 601 filament_diameter = 1.75
 602 fill_angle = 30
 603 fill_density = 0.3
 604 fill_pattern = rectilinear
 605 first_layer_bed_temperature = 50
 606 first_layer_extrusion_width = 0
 607 first_layer_height = 0.27
 608 first_layer_speed = 40%
 609 first_layer_temperature = 197
 610 g0 = 0
 611 gap_fill_speed = 20
 612 gcode_arcs = 0
 613 gcode_comments = 0
 614 gcode_flavor = reprap
 615 infill_acceleration = 0
 616 infill_every_layers = 1
 617 infill_extruder = 1
 618 infill_extrusion_width = 0
 619 infill_first = 0
 620 infill_only_where_needed = 0
 621 infill_speed = 70
 622 layer_gcode =
 623 layer_height = 0.24
 624 max_fan_speed = 100
 625 min_fan_speed = 35
 626 min_print_speed = 5
 627 min_skirt_length = 10
 628 notes = Config used for bottle name tags (http://www.thingiverse.com/thing:38861)
 629 nozzle_diameter = 0.33
 630 only_retract_when_crossing_perimeters = 1
 631 output_filename_format = [input_filename_base].gcode
 632 perimeter_acceleration = 0
 633 perimeter_extruder = 1
 634 perimeter_extrusion_width = 0
 635 perimeter_speed = 50
 636 perimeters = 2
 637 post_process =
 638 print_center = 90,100
 639 raft_layers = 0
 640 randomize_start =
 641 resolution = 0
 642 retract_before_travel = 0
 643 retract_layer_change = 1
 644 retract_length = 2
 645 retract_length_toolchange = 5
 646 retract_lift = 0
 647 retract_restart_extra = 0
 648 retract_restart_extra_toolchange = 0
 649 retract_speed = 50
 650 rotate = 0
 651 scale = 1
 652 skirt_distance = 5
 653 skirt_height = 1
 654 skirts = 2
 655 slowdown_below_layer_time = 50
 656 small_perimeter_speed = 60%
 657 solid_fill_pattern = rectilinear
 658 solid_infill_below_area = 0
 659 solid_infill_every_layers = 0
 660 solid_infill_extrusion_width = 0
 661 solid_infill_speed = 100%
 662 start_gcode = G28 ; home all axes\nM92 E820
 663 support_material =
 664 support_material_angle = 45
 665 support_material_enforce_layers = 0
 666 support_material_extruder = 1
 667 support_material_extrusion_width = 0
 668 support_material_interface_layers = 0
 669 support_material_interface_spacing = 0
 670 support_material_pattern = rectilinear
 671 support_material_spacing = 2
 672 support_material_speed = 70
 673 support_material_threshold = 41
 674 temperature = 188
 675 threads = 2
 676 toolchange_gcode =
 677 top_infill_extrusion_width = 0
 678 top_solid_infill_speed = 70%
 679 top_solid_layers = 3
 680 travel_speed = 50
 681 use_relative_e_distances = 0
 682 vibration_limit = 0
 683 z_offset = 0
 684 </pre>
 685
 686 ==== von Chrissi^ ====
 687 * Nette Konfiguration zum Drucken von allem möglichen.
 688 * First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
 689 * First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
 690 <pre  style="height:200px;overflow:scroll;">
 691 # generated by Slic3r 0.9.3 on Tue Nov  6 21:53:43 2012
 692 acceleration = 0
 693 bed_size = 180,200
 694 bed_temperature = 60
 695 bridge_fan_speed = 100
 696 bridge_flow_ratio = 1.05
 697 bridge_speed = 60
 698 brim_width = 0
 699 complete_objects =
 700 cooling = 1
 701 disable_fan_first_layers = 1
 702 duplicate = 1
 703 duplicate_distance = 6
 704 duplicate_grid = 1,1
 705 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 706 external_perimeter_speed = 100%
 707 extra_perimeters = 1
 708 extruder_clearance_height = 20
 709 extruder_clearance_radius = 30
 710 extruder_offset = 0x0
 711 extrusion_axis = E
 712 extrusion_multiplier = 1
 713 extrusion_width = 100%
 714 fan_always_on = 0
 715 fan_below_layer_time = 60
 716 filament_diameter = 1.75
 717 fill_angle = 45
 718 fill_density = 0.1
 719 fill_pattern = rectilinear
 720 first_layer_bed_temperature = 60
 721 first_layer_extrusion_width = 112%
 722 first_layer_height = 95%
 723 first_layer_speed = 15%
 724 first_layer_temperature = 200
 725 g0 = 0
 726 gcode_arcs = 0
 727 gcode_comments = 0
 728 gcode_flavor = reprap
 729 infill_acceleration = 50
 730 infill_every_layers = 1
 731 infill_extruder = 1
 732 infill_extrusion_width = 120%
 733 infill_speed = 60
 734 layer_gcode =
 735 layer_height = 0.3
 736 max_fan_speed = 100
 737 min_fan_speed = 35
 738 min_print_speed = 5
 739 notes = larsanconfig
 740 nozzle_diameter = 0.35
 741 only_retract_when_crossing_perimeters = 1
 742 output_filename_format = [timestamp]_[input_filename_base].gcode
 743 perimeter_acceleration = 25
 744 perimeter_extruder = 1
 745 perimeter_extrusion_width = 0
 746 perimeter_speed = 60
 747 perimeters = 2
 748 post_process =
 749 print_center = 120,120
 750 randomize_start = 1
 751 retract_before_travel = 4
 752 retract_length = 2
 753 retract_length_toolchange = 3
 754 retract_lift = 0
 755 retract_restart_extra = 0
 756 retract_restart_extra_toolchange = 0
 757 retract_speed = 50
 758 rotate = 0
 759 scale = 1
 760 skirt_distance = 10
 761 skirt_height = 1
 762 skirts = 3
 763 slowdown_below_layer_time = 50
 764 small_perimeter_speed = 50%
 765 solid_fill_pattern = rectilinear
 766 solid_infill_below_area = 0
 767 solid_infill_every_layers = 0
 768 solid_infill_speed = 100%
 769 solid_layers = 3
 770 start_gcode = G28 ; home all axes\nM92 E820
 771 support_material = 1
 772 support_material_angle = 45
 773 support_material_extruder = 1
 774 support_material_extrusion_width = 160%
 775 support_material_pattern = rectilinear
 776 support_material_spacing = 2
 777 support_material_threshold = 40
 778 temperature = 205
 779 threads = 2
 780 top_solid_infill_speed = 40%
 781 travel_speed = 90
 782 use_relative_e_distances = 0
 783 z_offset = 0
 784 </pre>
 785
 786 ==== Gelbes Filament ====
 787 * Ursprünglich für [[Reprap/Parent]] erstellt
 788 * Damit gedruckt: der letzte gelbe frame-vertex für den Drucker
 789 * etwas wärmer (195°C)
 790 * 0.22 mm z-offeset
 791 <pre style="height:200px;overflow:scroll;">
 792 acceleration = 0
 793 bed_size = 170,170
 794 bed_temperature = 60
 795 bridge_fan_speed = 100
 796 bridge_flow_ratio = 1
 797 bridge_speed = 30
 798 brim_width = 0
 799 complete_objects = 0
 800 cooling = 1
 801 disable_fan_first_layers = 1
 802 duplicate = 1
 803 duplicate_distance = 6
 804 duplicate_grid = 1,1
 805 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 806 external_perimeter_speed = 90%
 807 extra_perimeters = 1
 808 extruder_clearance_height = 20
 809 extruder_clearance_radius = 20
 810 extrusion_axis = E
 811 extrusion_multiplier = 1
 812 extrusion_width = 0
 813 fan_always_on = 0
 814 fan_below_layer_time = 60
 815 filament_diameter = 3
 816 fill_angle = 45
 817 fill_density = 0.15
 818 fill_pattern = rectilinear
 819 first_layer_bed_temperature = 60
 820 first_layer_extrusion_width = 0
 821 first_layer_height = 115%
 822 first_layer_speed = 80%
 823 first_layer_temperature = 200
 824 g0 = 0
 825 gcode_arcs = 0
 826 gcode_comments = 0
 827 gcode_flavor = reprap
 828 infill_acceleration = 50
 829 infill_every_layers = 1
 830 infill_extruder = 1
 831 infill_extrusion_width = 0
 832 infill_speed = 40
 833 layer_gcode =
 834 layer_height = 0.28
 835 max_fan_speed = 100
 836 min_fan_speed = 35
 837 min_print_speed = 10
 838 notes = Used for Mate name tag
 839 nozzle_diameter = 0.35
 840 output_filename_format = [input_filename_base].gcode
 841 perimeter_acceleration = 25
 842 perimeter_speed = 30
 843 perimeters = 3
 844 perimeters_extruder = 1
 845 perimeters_extrusion_width = 0
 846 post_process =
 847 print_center = 50,27
 848 randomize_start = 1
 849 retract_before_travel = 4
 850 retract_length = 3
 851 retract_lift = 0.4
 852 retract_restart_extra = 0
 853 retract_speed = 30
 854 rotate = 0
 855 scale = 1
 856 skirt_distance = 6
 857 skirt_height = 1
 858 skirts = 3
 859 slowdown_below_layer_time = 60
 860 small_perimeter_speed = 30
 861 solid_fill_pattern = rectilinear
 862 solid_infill_speed = 40
 863 solid_layers = 3
 864 start_gcode = G28 ; home all axes\nM92 E820
 865 support_material =
 866 support_material_angle = 45
 867 support_material_extruder = 1
 868 support_material_extrusion_width = 0
 869 support_material_pattern = rectilinear
 870 support_material_spacing = 2.5
 871 support_material_threshold = 45
 872 temperature = 195
 873 threads = 2
 874 top_solid_infill_speed = 40
 875 travel_speed = 130
 876 use_relative_e_distances = 0
 877 z_offset = 0.22
 878 </pre>
 879
 880 ==== RepRap-Config ====
 881 Konfiguration, mit der die Teile für den RepRap vom [http://netz39.eu Netz39] gedruckt wurden.
 882 <pre style="height:200px;overflow:scroll;">
 883 # generated by Slic3r 0.9.9-dev on Mon Jun  3 17:06:48 2013
 884 avoid_crossing_perimeters = 0
 885 bed_size = 180,200
 886 bed_temperature = 50
 887 bottom_solid_layers = 5
 888 bridge_acceleration = 0
 889 bridge_fan_speed = 100
 890 bridge_flow_ratio = 1
 891 bridge_speed = 30
 892 brim_width = 0
 893 complete_objects = 1
 894 cooling =
 895 default_acceleration = 0
 896 disable_fan_first_layers = 1
 897 duplicate = 1
 898 duplicate_distance = 6
 899 duplicate_grid = 1,1
 900 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 901 external_perimeter_speed = 40%
 902 external_perimeters_first = 0
 903 extra_perimeters =
 904 extruder_clearance_height = 35
 905 extruder_clearance_radius = 62
 906 extruder_offset = 0x0
 907 extrusion_axis = E
 908 extrusion_multiplier = 1.1
 909 extrusion_width = 0
 910 fan_always_on = 0
 911 fan_below_layer_time = 60
 912 filament_diameter = 1.75
 913 fill_angle = 30
 914 fill_density = 0.5
 915 fill_pattern = rectilinear
 916 first_layer_bed_temperature = 50
 917 first_layer_extrusion_width = 0
 918 first_layer_height = 150%
 919 first_layer_speed = 40%
 920 first_layer_temperature = 197
 921 g0 = 0
 922 gap_fill_speed = 20
 923 gcode_arcs = 0
 924 gcode_comments = 0
 925 gcode_flavor = reprap
 926 infill_acceleration = 0
 927 infill_every_layers = 1
 928 infill_extruder = 1
 929 infill_extrusion_width = 0
 930 infill_first = 0
 931 infill_only_where_needed = 0
 932 infill_speed = 60
 933 layer_gcode =
 934 layer_height = 0.2
 935 max_fan_speed = 100
 936 min_fan_speed = 35
 937 min_print_speed = 5
 938 min_skirt_length = 15
 939 notes = config for printing netz39 pieces
 940 nozzle_diameter = 0.33
 941 only_retract_when_crossing_perimeters = 1
 942 output_filename_format = [input_filename_base].gcode
 943 perimeter_acceleration = 0
 944 perimeter_extruder = 1
 945 perimeter_extrusion_width = 0
 946 perimeter_speed = 60
 947 perimeters = 3
 948 post_process =
 949 print_center = 90,100
 950 raft_layers = 0
 951 randomize_start =
 952 resolution = 0
 953 retract_before_travel = 0
 954 retract_layer_change = 1
 955 retract_length = 2
 956 retract_length_toolchange = 5
 957 retract_lift = 0
 958 retract_restart_extra = 0
 959 retract_restart_extra_toolchange = 0
 960 retract_speed = 50
 961 rotate = 0
 962 scale = 1
 963 skirt_distance = 5
 964 skirt_height = 1
 965 skirts = 2
 966 slowdown_below_layer_time = 50
 967 small_perimeter_speed = 60%
 968 solid_fill_pattern = rectilinear
 969 solid_infill_below_area = 0
 970 solid_infill_every_layers = 0
 971 solid_infill_extrusion_width = 0
 972 solid_infill_speed = 100%
 973 start_gcode = G28 ; home all axes\nM92 E820
 974 support_material =
 975 support_material_angle = 45
 976 support_material_enforce_layers = 0
 977 support_material_extruder = 1
 978 support_material_extrusion_width = 0
 979 support_material_interface_layers = 0
 980 support_material_interface_spacing = 0
 981 support_material_pattern = rectilinear
 982 support_material_spacing = 2
 983 support_material_speed = 60
 984 support_material_threshold = 41
 985 temperature = 188
 986 threads = 2
 987 toolchange_gcode =
 988 top_infill_extrusion_width = 0
 989 top_solid_infill_speed = 70%
 990 top_solid_layers = 5
 991 travel_speed = 100
 992 use_relative_e_distances = 0
 993 vibration_limit = 0
 994 z_offset = 0
 995 </pre>
 996
 997 [[Kategorie:RepRap]]