RepRap%2FConfigs%2FSlic3r.mw

   1 Eine Seite um (gute) Beispielkonfigkurationen zu sammeln, am besten mit Beispieldruck(foto)
   2
   3 == Gelbes Filament ==
   4 * Damit gedruckt: der letzte gelbe frame-vertex für den Drucker
   5 * etwas wärmer (195°C)
   6 * 0.22 mm z-offeset
   7 <pre style="height:200px;overflow:scroll;">
   8 acceleration = 0
   9 bed_size = 170,170
  10 bed_temperature = 60
  11 bridge_fan_speed = 100
  12 bridge_flow_ratio = 1
  13 bridge_speed = 30
  14 brim_width = 0
  15 complete_objects = 0
  16 cooling = 1
  17 disable_fan_first_layers = 1
  18 duplicate = 1
  19 duplicate_distance = 6
  20 duplicate_grid = 1,1
  21 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
  22 external_perimeter_speed = 90%
  23 extra_perimeters = 1
  24 extruder_clearance_height = 20
  25 extruder_clearance_radius = 20
  26 extrusion_axis = E
  27 extrusion_multiplier = 1
  28 extrusion_width = 0
  29 fan_always_on = 0
  30 fan_below_layer_time = 60
  31 filament_diameter = 3
  32 fill_angle = 45
  33 fill_density = 0.15
  34 fill_pattern = rectilinear
  35 first_layer_bed_temperature = 60
  36 first_layer_extrusion_width = 0
  37 first_layer_height = 115%
  38 first_layer_speed = 80%
  39 first_layer_temperature = 200
  40 g0 = 0
  41 gcode_arcs = 0
  42 gcode_comments = 0
  43 gcode_flavor = reprap
  44 infill_acceleration = 50
  45 infill_every_layers = 1
  46 infill_extruder = 1
  47 infill_extrusion_width = 0
  48 infill_speed = 40
  49 layer_gcode =
  50 layer_height = 0.28
  51 max_fan_speed = 100
  52 min_fan_speed = 35
  53 min_print_speed = 10
  54 notes = Used for Mate name tag
  55 nozzle_diameter = 0.35
  56 output_filename_format = [input_filename_base].gcode
  57 perimeter_acceleration = 25
  58 perimeter_speed = 30
  59 perimeters = 3
  60 perimeters_extruder = 1
  61 perimeters_extrusion_width = 0
  62 post_process =
  63 print_center = 50,27
  64 randomize_start = 1
  65 retract_before_travel = 4
  66 retract_length = 3
  67 retract_lift = 0.4
  68 retract_restart_extra = 0
  69 retract_speed = 30
  70 rotate = 0
  71 scale = 1
  72 skirt_distance = 6
  73 skirt_height = 1
  74 skirts = 3
  75 slowdown_below_layer_time = 60
  76 small_perimeter_speed = 30
  77 solid_fill_pattern = rectilinear
  78 solid_infill_speed = 40
  79 solid_layers = 3
  80 start_gcode = G28 ; home all axes\nM92 E820
  81 support_material =
  82 support_material_angle = 45
  83 support_material_extruder = 1
  84 support_material_extrusion_width = 0
  85 support_material_pattern = rectilinear
  86 support_material_spacing = 2.5
  87 support_material_threshold = 45
  88 temperature = 195
  89 threads = 2
  90 top_solid_infill_speed = 40
  91 travel_speed = 130
  92 use_relative_e_distances = 0
  93 z_offset = 0.22
  94 </pre>