Szenario ergänzt Falls keine Eskalation stattfindet
[stratum0-wiki.git] / RepRap%2FConfigs%2FSlic3r%2Fprint-pla-0.3mm.ini.mw
1 # generated by Slic3r 1.2.9 on Fri Jan 29 00:58:11 2016
2 avoid_crossing_perimeters = 1
3 bottom_solid_layers = 3
4 bridge_acceleration = 0
5 bridge_flow_ratio = 1
6 bridge_speed = 30
7 brim_width = 0
8 complete_objects = 0
9 default_acceleration = 0
10 dont_support_bridges = 1
11 external_fill_pattern = rectilinear
12 external_perimeter_extrusion_width = 0
13 external_perimeter_speed = 26
14 external_perimeters_first = 0
15 extra_perimeters = 1
16 extruder_clearance_height = 20
17 extruder_clearance_radius = 20
18 extrusion_width = 0.5
19 fill_angle = 45
20 fill_density = 20%
21 fill_pattern = rectilinear
22 first_layer_acceleration = 0
23 first_layer_extrusion_width = 0.5
24 first_layer_height = 0.3
25 first_layer_speed = 20
26 gap_fill_speed = 20
27 gcode_comments = 0
28 infill_acceleration = 0
29 infill_every_layers = 1
30 infill_extruder = 1
31 infill_extrusion_width = 0.5
32 infill_first = 0
33 infill_only_where_needed = 0
34 infill_overlap = 15%
35 infill_speed = 50
36 interface_shells = 0
37 layer_height = 0.3
38 max_print_speed = 80
39 max_volumetric_speed = 0
40 min_skirt_length = 10
41 notes = based on the official RepRapPro "Mendel PLA 05 nozzle.ini" from https://github.com/reprappro/profiles/archive/v1.0.tar.gz
42 only_retract_when_crossing_perimeters = 1
43 ooze_prevention = 0
44 output_filename_format = [input_filename_base]_Mendel_PLA.gcode
45 overhangs = 1
46 perimeter_acceleration = 0
47 perimeter_extruder = 1
48 perimeter_extrusion_width = 0.5
49 perimeter_speed = 32
50 perimeters = 2
51 post_process =
52 raft_layers = 0
53 resolution = 0
54 seam_position = aligned
55 skirt_distance = 3
56 skirt_height = 1
57 skirts = 1
58 small_perimeter_speed = 26
59 solid_infill_below_area = 5
60 solid_infill_every_layers = 0
61 solid_infill_extruder = 1
62 solid_infill_extrusion_width = 0
63 solid_infill_speed = 40
64 spiral_vase = 0
65 standby_temperature_delta = -5
66 support_material = 0
67 support_material_angle = 0
68 support_material_contact_distance = 0.2
69 support_material_enforce_layers = 0
70 support_material_extruder = 1
71 support_material_extrusion_width = 85%
72 support_material_interface_extruder = 1
73 support_material_interface_layers = 3
74 support_material_interface_spacing = 0
75 support_material_interface_speed = 100%
76 support_material_pattern = rectilinear
77 support_material_spacing = 6
78 support_material_speed = 20
79 support_material_threshold = 45
80 thin_walls = 1
81 threads = 4
82 top_infill_extrusion_width = 0
83 top_solid_infill_speed = 32
84 top_solid_layers = 4
85 travel_speed = 250
86 xy_size_compensation = 0
This page took 0.046901 seconds and 5 git commands to generate.