vom USB-Stick

diff --git a/RepRap%2FConfigs%2FSlic3r%2Fprint-abs-0.3mm.ini.mw b/RepRap%2FConfigs%2FSlic3r%2Fprint-abs-0.3mm.ini.mw
new file mode 100644 (file)
index 0000000..a7679c2
--- /dev/null
+++ b/RepRap%2FConfigs%2FSlic3r%2Fprint-abs-0.3mm.ini.mw
@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Fri Jan 29 00:56:08 2016
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 26
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.5
+fill_angle = 45
+fill_density = 15%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.5
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 50
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 10
+notes = based on the official RepRapPro "Mendel ABS 05 nozzle.ini" from https://github.com/reprappro/profiles/archive/v1.0.tar.gz
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_Mendel_ABS.gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.5
+perimeter_speed = 32
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 26
+solid_infill_below_area = 5
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 85%
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 6
+support_material_speed = 20
+support_material_threshold = 45
+thin_walls = 1
+threads = 4
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 32
+top_solid_layers = 3
+travel_speed = 250
+xy_size_compensation = 0