vom USB-Stick

diff --git a/RepRap%2FConfigs%2FSlic3r%2Fprinter.ini.mw b/RepRap%2FConfigs%2FSlic3r%2Fprinter.ini.mw
new file mode 100644 (file)
index 0000000..7360801
--- /dev/null
+++ b/RepRap%2FConfigs%2FSlic3r%2Fprinter.ini.mw
@@ -0,0 +1,27 @@
+# generated by Slic3r 1.2.9 on Thu Jan 28 20:04:50 2016
+bed_shape = 0x0,200x0,200x177,0x177
+before_layer_gcode = 
+end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; Bed off\nG28 X0           ; home X axis\nG0 Y177         ; moving Bed out\nM84               ; disable motors\n
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.5
+octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
+octoprint_host = rapsberry:5000
+pressure_advance = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 5
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+start_gcode = G28 Z0            ; home Z\nG1 Z10         ; if bed is not level, don't scratch bed when homing XY\nG28 X0 Y0         ; home X Y\nG28 Z0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0