/* Konfigurationen für den Slicer */ meine aktuelle Config hinzugefügt

diff --git a/RepRap%2FParent.mw b/RepRap%2FParent.mw
index 968903f..c3f2818 100644 (file)
--- a/RepRap%2FParent.mw
+++ b/RepRap%2FParent.mw
@@ -308,6 +308,97 @@ use_relative_e_distances = 0
 z_offset = 0
 </pre>
 
 z_offset = 0
 </pre>
 

+==== Von larsan ====
+Basierend auf der Mateconfig. Ist momentan so eingestellt, dass recht nah am Urspung, also vorne links gedruckt wird, das muss ggf für jedes Bauteil einzeln angepasst werden.
+<pre style="height:200px;overflow:scroll;">
+acceleration = 0
+bed_size = 170,170
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 0
+complete_objects = 0
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
+external_perimeter_speed = 90%
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 135%
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 0.15
+fill_pattern = honeycomb
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 0
+first_layer_height = 115%
+first_layer_speed = 80%
+first_layer_temperature = 195
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_speed = 60
+layer_gcode = 
+layer_height = 0.28
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+notes = Used for Mate name tag
+nozzle_diameter = 0.35
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_speed = 40
+perimeters = 3
+perimeters_extruder = 1
+perimeters_extrusion_width = 0
+post_process = 
+print_center = 45,30
+randomize_start = 1
+retract_before_travel = 4
+retract_length = 1
+retract_lift = 0.4
+retract_restart_extra = 0
+retract_speed = 30
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 60
+small_perimeter_speed = 40
+solid_fill_pattern = rectilinear
+solid_infill_speed = 60
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 
+support_material_angle = 45
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_threshold = 45
+temperature = 185
+threads = 2
+top_solid_infill_speed = 50
+travel_speed = 130
+use_relative_e_distances = 0
+z_offset = 0
+</pre>
+

 ===Drucken===
 * Mit Printrun Datei auf Drucker drucken
 
 ===Drucken===
 * Mit Printrun Datei auf Drucker drucken