/* Von larsan */ nochmal

diff --git a/RepRap.mw b/RepRap.mw
index af82aa5..ddd6754 100644 (file)
--- a/RepRap.mw
+++ b/RepRap.mw
@@ -61,40 +61,40 @@ Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gu
 Mit Support etc. aktiviert. In etwa die Config vom Twilight-Druck
 
 <pre style="height:200px;overflow:scroll;">
-# generated by Slic3r 0.9.4-dev on Sat Oct 27 23:12:28 2012
+# generated by Slic3r 0.9.4-dev on Sat Nov  3 17:46:55 2012
 acceleration = 0
 bed_size = 180,200
 bed_temperature = 60
-bottom_solid_layers = 1
+bottom_solid_layers = 3
 bridge_fan_speed = 100
-bridge_flow_ratio = 1
+bridge_flow_ratio = 1.05
 bridge_speed = 60
 brim_width = 0
-complete_objects = 0
+complete_objects = 
 cooling = 1
 disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
-external_perimeter_speed = 60
+external_perimeter_speed = 100%
 extra_perimeters = 1
 extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_radius = 30
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1.0
-extrusion_width = 90%
+extrusion_multiplier = 1.02
+extrusion_width = 100%
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.75
 fill_angle = 45
-fill_density = 1
-fill_pattern = rectilinear
+fill_density = 0.25
+fill_pattern = honeycomb
 first_layer_bed_temperature = 60
-first_layer_extrusion_width = 40%
-first_layer_height = 116%
-first_layer_speed = 50%
+first_layer_extrusion_width = 90%
+first_layer_height = 95%
+first_layer_speed = 25%
 first_layer_temperature = 200
 g0 = 0
 gcode_arcs = 0
@@ -103,21 +103,22 @@ gcode_flavor = reprap
 infill_acceleration = 50
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 60%
-infill_speed = 60
+infill_extrusion_width = 120%
+infill_speed = 70
 layer_gcode = 
-layer_height = 0.28
+layer_height = 0.3
 max_fan_speed = 100
 min_fan_speed = 35
-min_print_speed = 10
-notes = Used for Mate name tag
+min_print_speed = 5
+min_skirt_length = 0
+notes = larsanconfig
 nozzle_diameter = 0.35
 only_retract_when_crossing_perimeters = 1
-output_filename_format = [input_filename_base].gcode
+output_filename_format = [timestamp]_[input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
-perimeter_extrusion_width = 110%
-perimeter_speed = 60
+perimeter_extrusion_width = 0
+perimeter_speed = 40
 perimeters = 2
 post_process = 
 print_center = 90,100
@@ -134,24 +135,24 @@ scale = 1
 skirt_distance = 10
 skirt_height = 1
 skirts = 3
-slowdown_below_layer_time = 60
-small_perimeter_speed = 60
+slowdown_below_layer_time = 50
+small_perimeter_speed = 100%
 solid_fill_pattern = rectilinear
 solid_infill_below_area = 0
-solid_infill_every_layers = 1
-solid_infill_speed = 60
+solid_infill_every_layers = 0
+solid_infill_speed = 100%
 start_gcode = G28 ; home all axes\nM92 E820
-support_material = 
+support_material = 1
 support_material_angle = 45
 support_material_extruder = 1
-support_material_extrusion_width = 0
+support_material_extrusion_width = 160%
 support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_threshold = 45
+support_material_spacing = 2
+support_material_threshold = 40
 temperature = 200
 threads = 2
-top_solid_infill_speed = 60
-top_solid_layers = 1
+top_solid_infill_speed = 40%
+top_solid_layers = 2
 travel_speed = 90
 use_relative_e_distances = 0
 z_offset = 0.20