slic3r config

diff --git a/RepRap%2FParent.mw b/RepRap%2FParent.mw
index e018e29..ca2fd24 100644 (file)
--- a/RepRap%2FParent.mw
+++ b/RepRap%2FParent.mw
@@ -34,10 +34,87 @@ Solltest du selber drucken wollen und nicht auf der Liste stehen, wende dich an
 
 ===Slicen===
 * Die Bemerkungen hier beziehen sich auf Slic3r. Es gibt noch andere Tools, wie SFACT oder Skeinforge, aber die sind deutlich komplexer
+* Die Config muss nach jedem Start neu geladen werden
 * Eine gute Temperatur für transparentes PLA ist 170°C. Orange druckt gut bei 185°C
 * Der erste Layer sollte mit 10-15°C mehr gedruckt werden
 * Es kann helfen, von Zeit zu Zeit die Version zu updaten
 
+Configdatei für Slic3r:
+<pre>
+acceleration = 0
+bed_size = 180,190
+bed_temperature = 55
+bottom_layer_speed_ratio = 0.8
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 50
+complete_objects = 0
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 E0.2\nG1 E0 F3000 ; retract filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width_ratio = 1.8
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 0.20
+fill_pattern = honeycomb
+first_layer_bed_temperature = 60
+first_layer_height_ratio = 1
+first_layer_temperature = 195
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_speed = 80
+layer_gcode = 
+layer_height = 0.25
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 30
+notes = Setting for new Firmware version\nUsed for almost everything. Bridges well\n\nOrange prints well, transparent prints well at 185 first layer temp and 170 other layers
+nozzle_diameter = 0.35
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_center = 90,95
+randomize_start = 1
+retract_before_travel = 2
+retract_length = 1
+retract_lift = 0.25
+retract_restart_extra = 0
+retract_speed = 10
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+slowdown_below_layer_time = 30
+small_perimeter_speed = 45
+solid_fill_pattern = rectilinear
+solid_infill_speed = 70
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 0
+support_material_tool = 0
+temperature = 185
+threads = 1
+travel_speed = 145
+use_relative_e_distances = 0
+z_offset = 0
+</pre>
+
 ===Drucken===
 * Mit Printrun Datei auf Drucker drucken