/* Schnelle Config von Daniel Bohrer (Work in Progress) */ aktualisiert und Notizen

diff --git a/RepRap.mw b/RepRap.mw
index 1feaa3c..82b4dff 100644 (file)
--- a/RepRap.mw
+++ b/RepRap.mw
@@ -168,8 +168,9 @@ z_offset = 0.20
 </pre>
 
 ==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
 </pre>
 
 ==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====

+Der erste und letzte Layer wird "normal schnell" gedruckt, die anderen doppelt so schnell. Bei dünnen Strukturen (z.B. Mate-Tags) muss man notfalls noch ein bisschen mit der Perimeteranzahl spielen.

 <pre style="height:200px;overflow:scroll;">
 <pre style="height:200px;overflow:scroll;">

-# generated by Slic3r 0.9.4-dev on Tue Oct 23 23:01:34 2012
+# generated by Slic3r 0.9.4-dev on Fri Nov 16 20:55:02 2012

 acceleration = 0
 bed_size = 180,200
 bed_temperature = 60
 acceleration = 0
 bed_size = 180,200
 bed_temperature = 60


@@ -185,7 +186,7 @@ duplicate_distance = 6
 duplicate_grid = 1,1
 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 external_perimeter_speed = 90%
 duplicate_grid = 1,1
 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 external_perimeter_speed = 90%

-extra_perimeters = 
+extra_perimeters = 1

 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0


@@ -195,12 +196,12 @@ extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.75
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.75

-fill_angle = 45
-fill_density = 0.3
+fill_angle = 0
+fill_density = 0.2

 fill_pattern = rectilinear
 first_layer_bed_temperature = 60
 first_layer_extrusion_width = 0
 fill_pattern = rectilinear
 first_layer_bed_temperature = 60
 first_layer_extrusion_width = 0

-first_layer_height = 120%
+first_layer_height = 100%

 first_layer_speed = 20%
 first_layer_temperature = 195
 g0 = 0
 first_layer_speed = 20%
 first_layer_temperature = 195
 g0 = 0


@@ -213,7 +214,7 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_speed = 120
 layer_gcode = 
 infill_extrusion_width = 0
 infill_speed = 120
 layer_gcode = 

-layer_height = 0.28
+layer_height = 0.25

 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10


@@ -244,21 +245,21 @@ skirts = 2
 slowdown_below_layer_time = 60
 small_perimeter_speed = 80%
 solid_fill_pattern = rectilinear
 slowdown_below_layer_time = 60
 small_perimeter_speed = 80%
 solid_fill_pattern = rectilinear

-solid_infill_below_area = 70
+solid_infill_below_area = 0

 solid_infill_every_layers = 0
 solid_infill_speed = 100%
 solid_layers = 3
 start_gcode = G28 ; home all axes\nM92 E820
 solid_infill_every_layers = 0
 solid_infill_speed = 100%
 solid_layers = 3
 start_gcode = G28 ; home all axes\nM92 E820

-support_material = 
+support_material = 1

 support_material_angle = 45
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_angle = 45
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_pattern = rectilinear

-support_material_spacing = 2.5
+support_material_spacing = 3

 support_material_threshold = 45
 temperature = 185
 threads = 3
 support_material_threshold = 45
 temperature = 185
 threads = 3

-top_solid_infill_speed = 60
+top_solid_infill_speed = 50%

 travel_speed = 140
 use_relative_e_distances = 0
 z_offset = 0.22
 travel_speed = 140
 use_relative_e_distances = 0
 z_offset = 0.22