Aktualisiert Einstellungen

diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index 1bf9929..ba07e00 100644 (file)
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Tue Apr 26 23:46:04 2016
+# generated by Slic3r 1.2.9 on Mon May  9 21:40:16 2016
 
 [filament:LULZBOT PLA]
 bed_temperature = 50
@@ -18,6 +18,24 @@ min_print_speed = 25
 slowdown_below_layer_time = 25
 temperature = 185
 
+[filament:MendelPro ABS]
+bed_temperature = 0
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 1.7
+first_layer_bed_temperature = 0
+first_layer_temperature = 250
+max_fan_speed = 100
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 30
+temperature = 245
+
 [filament:MendelPro PLA]
 bed_temperature = 50
 bridge_fan_speed = 100
@@ -54,28 +72,46 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 185
 
-[filament:prusa i3 PLA]
+[filament:prusa i3 ABS black]
+bed_temperature = 0
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 2
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 2.8
+first_layer_bed_temperature = 0
+first_layer_temperature = 250
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 245
+
+[filament:prusa i3 PLA klar orange]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
-disable_fan_first_layers = 1
+disable_fan_first_layers = 2
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
-filament_diameter = 2.8
-first_layer_bed_temperature = 55
-first_layer_temperature = 200
+filament_diameter = 2.6
+first_layer_bed_temperature = 50
+first_layer_temperature = 190
 max_fan_speed = 100
-min_fan_speed = 50
+min_fan_speed = 35
 min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 180
+slowdown_below_layer_time = 15
+temperature = 200
 
 [presets]
 filament = TinyBoy PLA.ini
 print = TinyBoy.ini
-printer = MendelPro.ini
+printer = prusa i3.ini
 
 [print:LULZBOT]
 avoid_crossing_perimeters = 0
@@ -256,27 +292,27 @@ avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 40
+bridge_speed = 0
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
+external_perimeter_speed = 0
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 150%
 first_layer_height = 0.2
-first_layer_speed = 10
-gap_fill_speed = 10
+first_layer_speed = 20
+gap_fill_speed = 0
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
@@ -288,7 +324,7 @@ infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 80
+max_print_speed = 50
 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 
@@ -308,7 +344,7 @@ seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 10
+small_perimeter_speed = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -333,7 +369,7 @@ support_material_threshold = 40
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
+top_solid_infill_speed = 0
 top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
@@ -368,7 +404,7 @@ gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0
+infill_extrusion_width = 110%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
@@ -455,7 +491,7 @@ gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0
+infill_extrusion_width = 110%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
@@ -512,6 +548,93 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
+[print:prusa i3 400 sup]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 10
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 20%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 10
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 110%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 0
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 1
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 0
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 1
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 5
+support_material_speed = 0
+support_material_threshold = 40
+thin_walls = 1
+threads = 2
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0
+
 [printer:LULZBOT]
 bed_shape = 0x0,300x0,300x300,0x300
 before_layer_gcode = 
@@ -559,7 +682,7 @@ retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
-start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
+start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
@@ -615,7 +738,7 @@ retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
-start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
+start_gcode = G28 Z            ; home Z\n\nG28 X Y         ; home X Y\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0