1 /**************************************************************************/
4 @author K. Townsend (microBuilder.eu)
8 Software License Agreement (BSD License)
10 Copyright (c) 2011, microBuilder SARL
13 Redistribution and use in source and binary forms, with or without
14 modification, are permitted provided that the following conditions are met:
15 1. Redistributions of source code must retain the above copyright
16 notice, this list of conditions and the following disclaimer.
17 2. Redistributions in binary form must reproduce the above copyright
18 notice, this list of conditions and the following disclaimer in the
19 documentation and/or other materials provided with the distribution.
20 3. Neither the name of the copyright holders nor the
21 names of its contributors may be used to endorse or promote products
22 derived from this software without specific prior written permission.
24 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
25 EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
26 WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
27 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
28 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
29 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30 LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
31 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
32 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
33 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 /**************************************************************************/
40 #include "projectconfig.h"
43 #include "core/adc/adc.h"
44 #include "core/cpu/cpu.h"
45 #include "core/pmu/pmu.h"
46 #include "core/wdt/wdt.h"
47 #include "core/gpio/gpio.h"
48 #include "core/ssp/ssp.h"
49 #include "core/systick/systick.h"
50 #include "core/usbhid-rom/usbmsc.h"
53 #include "core/cmd/cmd.h"
57 #include "ui/display.h"
61 #include "ui/sprite.h"
62 #include "util/util.h"
63 #include "jumpnrun/jumpnrun.h"
65 #include "dataflash/at45db041d.h"
67 #include "drivers/fatfs/ff.h"
69 #include "badge/pinconfig.h"
70 #include <funk/nrf24l01p.h>
74 #include "r0ketports.h"
75 void rbBacklightInit(void) {
76 /* Enable the clock for CT16B1 */
77 SCB_SYSAHBCLKCTRL
|= (SCB_SYSAHBCLKCTRL_CT16B1
);
79 /* Configure PIO1.9 as Timer1_16 MAT0 Output */
80 IOCON_PIO1_9
&= ~IOCON_PIO1_9_FUNC_MASK
;
81 IOCON_PIO1_9
|= IOCON_PIO1_9_FUNC_CT16B1_MAT0
;
83 /* Set default duty cycle (MR1) */
84 TMR_TMR16B1MR0
= 0; //(0xFFFF * (100 - brightness)) / 100;
86 /* External Match Register Settings for PWM */
87 TMR_TMR16B1EMR
= TMR_TMR16B1EMR_EMC0_TOGGLE
| TMR_TMR16B1EMR_EM0
;
90 TMR_TMR16B1TCR
= TMR_TMR16B1TCR_COUNTERENABLE_ENABLED
;
93 TMR_TMR16B1PWMC
= TMR_TMR16B1PWMC_PWM0_ENABLED
;
96 gpioSetDir(RB_PWR_LCDBL
, gpioDirection_Output
);
97 gpioSetValue(RB_PWR_LCDBL
, 0);
101 RB_HB0_IO
&= ~IOCON_SWDIO_PIO1_3_FUNC_MASK
;
102 RB_HB0_IO
|= IOCON_SWDIO_PIO1_3_FUNC_GPIO
;
103 RB_HB1_IO
&= ~IOCON_JTAG_TCK_PIO0_10_FUNC_MASK
;
104 RB_HB1_IO
|= IOCON_JTAG_TCK_PIO0_10_FUNC_GPIO
;
109 uint32_t volatile *reg
;
110 gpioPullupMode_t mode
;
111 } const input_pins
[] = {
113 { RB_BTN0
, &RB_BTN0_IO
, gpioPullupMode_PullDown
},
114 { RB_BTN1
, &RB_BTN1_IO
, gpioPullupMode_PullDown
},
115 { RB_BTN2
, &RB_BTN2_IO
, gpioPullupMode_PullDown
},
116 { RB_BTN3
, &RB_BTN3_IO
, gpioPullupMode_PullDown
},
117 { RB_BTN4
, &RB_BTN4_IO
, gpioPullupMode_PullDown
},
118 { RB_HB0
, &RB_HB0_IO
, gpioPullupMode_PullDown
},
119 { RB_HB1
, &RB_HB1_IO
, gpioPullupMode_PullDown
},
120 { RB_PWR_CHRG
, &RB_PWR_CHRG_IO
, gpioPullupMode_PullDown
}
122 { RB_BTN0
, &RB_BTN0_IO
, gpioPullupMode_PullUp
},
123 { RB_BTN1
, &RB_BTN1_IO
, gpioPullupMode_PullUp
},
124 { RB_BTN2
, &RB_BTN2_IO
, gpioPullupMode_PullUp
},
125 { RB_BTN3
, &RB_BTN3_IO
, gpioPullupMode_PullUp
},
126 { RB_BTN4
, &RB_BTN4_IO
, gpioPullupMode_PullUp
},
127 { RB_HB0
, &RB_HB0_IO
, gpioPullupMode_PullUp
},
128 { RB_HB1
, &RB_HB1_IO
, gpioPullupMode_PullUp
},
129 { RB_PWR_CHRG
, &RB_PWR_CHRG_IO
, gpioPullupMode_PullUp
}
133 for(int i
= 0; i
< ARRAY_SIZE(input_pins
); ++i
) {
134 gpioSetDir(input_pins
[i
].port
, input_pins
[i
].pin
, gpioDirection_Input
);
135 gpioSetPullup(input_pins
[i
].reg
, input_pins
[i
].mode
);
138 // LED3 zur Bestimmung der Umgebungshelligkeit.
139 gpioSetDir(RB_LED3
, gpioDirection_Input
);
140 RB_LED3_IO
= (RB_LED3_IO
& IOCON_PIO1_11_FUNC_MASK
) | IOCON_PIO1_11_FUNC_AD7
;
143 IOCON_JTAG_TDI_PIO0_11
&= ~IOCON_JTAG_TDI_PIO0_11_FUNC_MASK
;
144 IOCON_JTAG_TDI_PIO0_11
|= IOCON_JTAG_TDI_PIO0_11_FUNC_GPIO
;
150 } const output_pins
[] = {
169 for(int i
= 0; i
< ARRAY_SIZE(output_pins
); ++i
) {
170 gpioSetDir (output_pins
[i
].port
, output_pins
[i
].pin
, gpioDirection_Output
);
171 gpioSetValue(output_pins
[i
].port
, output_pins
[i
].pin
, output_pins
[i
].value
);
175 RB_PWR_LCDBL_IO
&= ~RB_PWR_LCDBL_IO_FUNC_MASK
;
176 RB_PWR_LCDBL_IO
|= RB_PWR_LCDBL_IO_FUNC_GPIO
;
178 gpioSetDir ( RB_PWR_LCDBL
, gpioDirection_Input
);
179 gpioSetPullup(&RB_PWR_LCDBL_IO
, gpioPullupMode_Inactive
);
182 badge_display_init();
188 badge_framebuffer fb
= { { { 0 } } };
190 badge_framebuffer_render_text(&fb
, 23, 30, "USB-Modus");
192 badge_framebuffer_render_number(&fb, 23, 50, sizeof(jumpnrun_tile));
193 badge_framebuffer_render_number(&fb, 33, 50, sizeof(jumpnrun_item));
194 badge_framebuffer_render_number(&fb, 48, 50, sizeof(jumpnrun_enemy));
196 badge_framebuffer_flush(&fb
);
201 void scrolltest(void) {
202 badge_browse_textfile("/fahrplan/test.txt");
208 systickInit(CFG_SYSTICK_DELAY_IN_MS
);
221 if(badge_input_raw() & BADGE_EVENT_KEY_DOWN
) {
227 if(badge_input_raw() & BADGE_EVENT_KEY_UP
) {