project/commands/cmd_sysinfo.c

   1 /**************************************************************************/
   2 /*!
   3     @file     cmd_sysinfo.c
   4     @author   K. Townsend (microBuilder.eu)
   5
   6     @brief    Code to execute for cmd_sysinfo in the 'core/cmd'
   7               command-line interpretter.
   8
   9     @section LICENSE
  10
  11     Software License Agreement (BSD License)
  12
  13     Copyright (c) 2010, microBuilder SARL
  14     All rights reserved.
  15
  16     Redistribution and use in source and binary forms, with or without
  17     modification, are permitted provided that the following conditions are met:
  18     1. Redistributions of source code must retain the above copyright
  19     notice, this list of conditions and the following disclaimer.
  20     2. Redistributions in binary form must reproduce the above copyright
  21     notice, this list of conditions and the following disclaimer in the
  22     documentation and/or other materials provided with the distribution.
  23     3. Neither the name of the copyright holders nor the
  24     names of its contributors may be used to endorse or promote products
  25     derived from this software without specific prior written permission.
  26
  27     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
  28     EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  29     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  30     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
  31     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  32     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  33     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  34     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  35     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  36     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  37 */
  38 /**************************************************************************/
  39 #include <stdio.h>
  40
  41 #include "projectconfig.h"
  42 #include "core/cmd/cmd.h"
  43 #include "core/systick/systick.h"
  44 #include "core/iap/iap.h"
  45 #include "project/commands.h"       // Generic helper functions
  46
  47 #ifdef CFG_CHIBI
  48   #include "drivers/rf/chibi/chb.h"
  49   #include "drivers/rf/chibi/chb_drvr.h"
  50 #endif
  51
  52 #ifdef CFG_PRINTF_UART
  53   #include "core/uart/uart.h"
  54 #endif
  55
  56 #ifdef CFG_LM75B
  57   #include "drivers/sensors/lm75b/lm75b.h"
  58 #endif
  59
  60 #ifdef CFG_TFTLCD
  61   #include "drivers/displays/tft/lcd.h"
  62 #endif
  63
  64 #ifdef CFG_SDCARD
  65   #include "core/gpio/gpio.h"
  66 #endif
  67
  68 /**************************************************************************/
  69 /*!
  70     'sysinfo' command handler
  71 */
  72 /**************************************************************************/
  73 void cmd_sysinfo(uint8_t argc, char **argv)
  74 {
  75   IAP_return_t iap_return;
  76
  77   printf("%-25s : %d.%d MHz %s", "System Clock", CFG_CPU_CCLK / 1000000, CFG_CPU_CCLK % 1000000, CFG_PRINTF_NEWLINE);
  78   printf("%-25s : v%d.%d.%d %s", "Firmware", CFG_FIRMWARE_VERSION_MAJOR, CFG_FIRMWARE_VERSION_MINOR, CFG_FIRMWARE_VERSION_REVISION, CFG_PRINTF_NEWLINE);
  79
  80   // 128-bit MCU Serial Number
  81   iap_return = iapReadSerialNumber();
  82   if(iap_return.ReturnCode == 0)
  83   {
  84     printf("%-25s : %08X %08X %08X %08X %s", "Serial Number", iap_return.Result[0],iap_return.Result[1],iap_return.Result[2],iap_return.Result[3], CFG_PRINTF_NEWLINE);
  85   }
  86
  87   // CLI and buffer Settings
  88   #ifdef CFG_INTERFACE
  89     printf("%-25s : %d bytes %s", "Max CLI Command", CFG_INTERFACE_MAXMSGSIZE, CFG_PRINTF_NEWLINE);
  90   #endif
  91
  92   #ifdef CFG_PRINTF_UART
  93     uart_pcb_t *pcb = uartGetPCB();
  94     printf("%-25s : %u %s", "UART Baud Rate", (unsigned int)(pcb->baudrate), CFG_PRINTF_NEWLINE);
  95   #endif
  96
  97   // TFT LCD Settings (if CFG_TFTLCD enabled)
  98   #ifdef CFG_TFTLCD
  99     printf("%-25s : %d %s", "LCD Width", (int)lcdGetWidth(), CFG_PRINTF_NEWLINE);
 100     printf("%-25s : %d %s", "LCD Height", (int)lcdGetHeight(), CFG_PRINTF_NEWLINE);
 101   #endif
 102
 103   // Wireless Settings (if CFG_CHIBI enabled)
 104   #ifdef CFG_CHIBI
 105     chb_pcb_t *pcb = chb_get_pcb();
 106     printf("%-25s : %s %s", "Wireless", "AT86RF212", CFG_PRINTF_NEWLINE);
 107     printf("%-25s : 0x%04X %s", "802.15.4 PAN ID", CFG_CHIBI_PANID, CFG_PRINTF_NEWLINE);
 108     printf("%-25s : 0x%04X %s", "802.15.4 Node Address", pcb->src_addr, CFG_PRINTF_NEWLINE);
 109     printf("%-25s : %d %s", "802.15.4 Channel", CFG_CHIBI_CHANNEL, CFG_PRINTF_NEWLINE);
 110   #endif
 111
 112   // System Uptime (based on systick timer)
 113   printf("%-25s : %u s %s", "System Uptime", (unsigned int)systickGetSecondsActive(), CFG_PRINTF_NEWLINE);
 114
 115   // System Temperature (if LM75B Present)
 116   #ifdef CFG_LM75B
 117     int32_t temp = 0;
 118     lm75bGetTemperature(&temp);
 119     temp *= 125;
 120     printf("%-25s : %d.%d C %s", "Temperature", temp / 1000, temp % 1000, CFG_PRINTF_NEWLINE);
 121   #endif
 122
 123   #ifdef CFG_SDCARD
 124     printf("%-25s : %s %s", "SD Card Present", gpioGetValue(CFG_SDCARD_CDPORT, CFG_SDCARD_CDPIN) ? "True" : "False", CFG_PRINTF_NEWLINE);
 125   #endif
 126 }