Pinconfig für Endbadge.
[hackover2013-badge-firmware.git] / funk / nrf24l01p.h
1 #ifndef _NRF24L01P_H
2 #define _NRF24L01P_H 1
3 #include <stdint.h>
4
5 #define MAX_PKT (32) // space for crc is supplied by the caller
6
7 // SPI commands
8 #define C_R_REGISTER 0x00
9 #define C_W_REGISTER 0x20
10 #define C_R_RX_PAYLOAD 0x61
11 #define C_W_TX_PAYLOAD 0xA0
12 #define C_FLUSH_TX 0xE1
13 #define C_FLUSH_RX 0xE2
14 #define C_REUSE_TX_PL 0xE3
15 #define C_R_RX_PL_WID 0x60
16 #define C_W_ACK_PAYLOAD 0xA8
17 #define C_W_TX_PAYLOAD_NOCACK 0xB0
18 #define C_NOP 0xFF
19
20 // Registers
21 #define R_CONFIG 0x00
22 #define R_EN_AA 0x01
23 #define R_EN_RXADDR 0x02
24 #define R_SETUP_AW 0x03
25 #define R_SETUP_RETR 0x04
26 #define R_RF_CH 0x05
27 #define R_RF_SETUP 0x06
28 #define R_STATUS 0x07
29 #define R_OBSERVE_TX 0x08
30 #define R_RPD 0x09
31 #define R_RX_ADDR_P0 0x0A
32 #define R_RX_ADDR_P0_LEN 5
33 #define R_RX_ADDR_P1 0x0B
34 #define R_RX_ADDR_P1_LEN 5
35 #define R_RX_ADDR_P2 0x0C
36 #define R_RX_ADDR_P2_LEN 1
37 #define R_RX_ADDR_P3 0x0D
38 #define R_RX_ADDR_P3_LEN 1
39 #define R_RX_ADDR_P4 0x0E
40 #define R_RX_ADDR_P4_LEN 1
41 #define R_RX_ADDR_P5 0x0F
42 #define R_RX_ADDR_P5_LEN 1
43 #define R_TX_ADDR 0x10
44 #define R_TX_ADDR_LEN 5
45 #define R_RX_PW_P0 0x11
46 #define R_RX_PW_P1 0x12
47 #define R_RX_PW_P2 0x13
48 #define R_RX_PW_P3 0x14
49 #define R_RX_PW_P4 0x15
50 #define R_RX_PW_P5 0x16
51 #define R_FIFO_STATUS 0x17
52 #define R_DYNPD 0x1c
53
54 // Register Flags
55
56 //CONFIG register definitions
57 #define R_CONFIG_RESERVED 0x80
58 #define R_CONFIG_MASK_RX_DR 0x40
59 #define R_CONFIG_MASK_TX_DS 0x20
60 #define R_CONFIG_MASK_MAX_RT 0x10
61 #define R_CONFIG_EN_CRC 0x08
62 #define R_CONFIG_CRCO 0x04
63 #define R_CONFIG_PWR_UP 0x02
64 #define R_CONFIG_PRIM_RX 0x01
65
66 //EN_AA register definitions
67 #define R_EN_AA_ENAA_P5 0x20
68 #define R_EN_AA_ENAA_P4 0x10
69 #define R_EN_AA_ENAA_P3 0x08
70 #define R_EN_AA_ENAA_P2 0x04
71 #define R_EN_AA_ENAA_P1 0x02
72 #define R_EN_AA_ENAA_P0 0x01
73 #define R_EN_AA_ENAA_NONE 0x00
74
75 //EN_RXADDR register definitions
76 #define R_EN_RXADDR_ERX_P5 0x20
77 #define R_EN_RXADDR_ERX_P4 0x10
78 #define R_EN_RXADDR_ERX_P3 0x08
79 #define R_EN_RXADDR_ERX_P2 0x04
80 #define R_EN_RXADDR_ERX_P1 0x02
81 #define R_EN_RXADDR_ERX_P0 0x01
82 #define R_EN_RXADDR_ERX_NONE 0x00
83
84 // RF_CH register definitions
85 #define R_RF_CH_BITS 0x7f
86
87 //RF_SETUP register definitions
88 #define R_RF_SETUP_CONT_WAVE 0x80
89 #define R_RF_SETUP_RF_DR_LOW 0x20
90 #define R_RF_SETUP_PLL_LOCK 0x10
91 #define R_RF_SETUP_RF_DR_HIGH 0x08
92 #define R_RF_SETUP_RF_PWR_0 0x00
93 #define R_RF_SETUP_RF_PWR_1 0x02
94 #define R_RF_SETUP_RF_PWR_2 0x04
95 #define R_RF_SETUP_RF_PWR_3 0x06
96
97 #define R_RF_SETUP_DR_1M 0x00
98 #define R_RF_SETUP_DR_2M 0x08
99 #define R_RF_SETUP_DR_250K 0x20
100
101 //SETUP_AW register definitions
102 #define R_SETUP_AW_3 0x01
103 #define R_SETUP_AW_4 0x02
104 #define R_SETUP_AW_5 0x03
105
106 //STATUS register definitions
107 #define R_STATUS_RX_DR 0x40
108 #define R_STATUS_TX_DS 0x20
109 #define R_STATUS_MAX_RT 0x10
110 #define R_STATUS_RX_P_NO 0x0E
111 #define R_STATUS_GET_RX_P_NO(x) ((x&R_STATUS_RX_P_NO)>>1)
112 #define R_STATUS_RX_FIFO_EMPTY 0x0E
113 #define R_STATUS_TX_FULL 0x01
114
115 /* config structure */
116
117 struct NRF_CFG {
118 uint8_t channel;
119 uint8_t txmac[5];
120 uint8_t mac0[5];
121 uint8_t mac1[5];
122 uint8_t mac2345[4];
123 uint8_t nrmacs;
124 uint8_t maclen[5];
125 };
126
127 typedef struct NRF_CFG * nrfconfig;
128
129
130 /* exported functions */
131 #define nrf_rcv_pkt_time(maxtime, maxsize, pkt) \
132 nrf_rcv_pkt_time_encr(maxtime, maxsize, pkt, NULL)
133
134 int nrf_rcv_pkt_time_encr(int maxtime, int maxsize, uint8_t * pkt, uint32_t const k[4]);
135
136 #define nrf_snd_pkt_crc(size, pkt) \
137 nrf_snd_pkt_crc_encr(size, pkt, NULL)
138 char nrf_snd_pkt_crc_encr(int size, uint8_t * pkt, uint32_t const k[4]);
139
140 void nrf_init() ;
141 void nrf_off() ;
142 void nrf_startCW();
143
144 void nrf_cmd(uint8_t cmd);
145 uint8_t nrf_cmd_status(uint8_t cmd);
146 void nrf_cmd_rw_long(uint8_t* data, int len);
147 void nrf_read_long(const uint8_t reg, int len, uint8_t* data);
148 void nrf_write_reg(const uint8_t reg, const uint8_t val);
149 uint8_t nrf_read_reg(const uint8_t reg);
150 void nrf_write_long(const uint8_t cmd, int len, const uint8_t* data);
151
152 void nrf_set_rx_mac(int pipe, int rxlen, int maclen, const uint8_t * mac);
153 void nrf_set_tx_mac(int maclen, const uint8_t * mac);
154 void nrf_disable_pipe(int pipe);
155 void nrf_set_channel(int channel);
156
157 void nrf_config_set(nrfconfig config);
158 void nrf_config_get(nrfconfig config);
159
160 void nrf_set_strength(unsigned char strength);
161
162 // new receive IF
163 void nrf_rcv_pkt_start(void);
164 int nrf_rcv_pkt_poll(int maxsize, uint8_t * pkt);
165 int nrf_rcv_pkt_poll_dec(int maxsize, uint8_t * pkt, uint32_t const key[4]);
166
167 // more utility.
168 void nrf_rcv_pkt_end(void);
169 void nrf_check_reset(void);
170 extern uint8_t _nrfresets;
171
172 /* END */
173
174 #endif /* _NRF24L01P_H */
175
This page took 0.050298 seconds and 5 git commands to generate.