project/commands/cmd_sysinfo.c

   1 /**************************************************************************/
   2 /*!
   3     @file     cmd_sysinfo.c
   4     @author   K. Townsend (microBuilder.eu)
   5
   6     @brief    Code to execute for cmd_sysinfo in the 'core/cmd'
   7               command-line interpretter.
   8
   9     @section LICENSE
  10
  11     Software License Agreement (BSD License)
  12
  13     Copyright (c) 2010, microBuilder SARL
  14     All rights reserved.
  15
  16     Redistribution and use in source and binary forms, with or without
  17     modification, are permitted provided that the following conditions are met:
  18     1. Redistributions of source code must retain the above copyright
  19     notice, this list of conditions and the following disclaimer.
  20     2. Redistributions in binary form must reproduce the above copyright
  21     notice, this list of conditions and the following disclaimer in the
  22     documentation and/or other materials provided with the distribution.
  23     3. Neither the name of the copyright holders nor the
  24     names of its contributors may be used to endorse or promote products
  25     derived from this software without specific prior written permission.
  26
  27     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
  28     EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  29     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  30     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
  31     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  32     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  33     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  34     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  35     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  36     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  37 */
  38 /**************************************************************************/
  39 #include <stdio.h>
  40
  41 #include "projectconfig.h"
  42 #include "core/cmd/cmd.h"
  43 #include "core/systick/systick.h"
  44 #include "core/iap/iap.h"
  45 #include "project/commands.h"       // Generic helper functions
  46
  47 #ifdef CFG_CHIBI
  48   #include "drivers/rf/chibi/chb.h"
  49   #include "drivers/rf/chibi/chb_drvr.h"
  50 #endif
  51
  52 #ifdef CFG_PRINTF_UART
  53   #include "core/uart/uart.h"
  54 #endif
  55
  56 #ifdef CFG_LM75B
  57   #include "drivers/sensors/lm75b/lm75b.h"
  58 #endif
  59
  60 #ifdef CFG_TFTLCD
  61   #include "drivers/displays/tft/lcd.h"
  62   #include "drivers/storage/eeprom/eeprom.h"
  63 #endif
  64
  65 #ifdef CFG_SDCARD
  66   #include "core/gpio/gpio.h"
  67 #endif
  68
  69 /**************************************************************************/
  70 /*!
  71     'sysinfo' command handler
  72 */
  73 /**************************************************************************/
  74 void cmd_sysinfo(uint8_t argc, char **argv)
  75 {
  76   IAP_return_t iap_return;
  77
  78   /* Note: Certain values are only reported if CFG_INTERFACE_LONGSYSINFO
  79      is set to 1 in projectconfig.h.  These extra values are more useful
  80      for debugging than real-world use, so there's no point wasiting
  81      flash space storing the code for them */
  82
  83   printf("%-25s : %d.%d.%d %s", "Firmware", CFG_FIRMWARE_VERSION_MAJOR, CFG_FIRMWARE_VERSION_MINOR, CFG_FIRMWARE_VERSION_REVISION, CFG_PRINTF_NEWLINE);
  84   printf("%-25s : %d.%d MHz %s", "System Clock", CFG_CPU_CCLK / 1000000, CFG_CPU_CCLK % 1000000, CFG_PRINTF_NEWLINE);
  85
  86   // System Uptime (based on systick timer)
  87   printf("%-25s : %u s %s", "System Uptime", (unsigned int)systickGetSecondsActive(), CFG_PRINTF_NEWLINE);
  88
  89   // 128-bit MCU Serial Number
  90   iap_return = iapReadSerialNumber();
  91   if(iap_return.ReturnCode == 0)
  92   {
  93     printf("%-25s : %08X %08X %08X %08X %s", "Serial Number", iap_return.Result[0],iap_return.Result[1],iap_return.Result[2],iap_return.Result[3], CFG_PRINTF_NEWLINE);
  94   }
  95
  96   #if CFG_INTERFACE_LONGSYSINFO
  97     #ifdef CFG_USBCDC
  98       printf("%-25s : %d ms %s", "USB Init Timeout", CFG_USBCDC_INITTIMEOUT, CFG_PRINTF_NEWLINE);
  99     #endif
 100   #endif
 101
 102   // CLI and buffer Settings
 103   #if CFG_INTERFACE_LONGSYSINFO
 104     printf("%-25s : %d bytes %s", "CLI Max Command Size", CFG_INTERFACE_MAXMSGSIZE, CFG_PRINTF_NEWLINE);
 105     printf("%-25s : %s %s", "CLI IRQ Enabled", CFG_INTERFACE_ENABLEIRQ ? "True" : "False", CFG_PRINTF_NEWLINE);
 106     #if CFG_INTERFACE_ENABLEIRQ
 107       printf("%-25s : %d.%d %s", "CLI IRQ Location", CFG_INTERFACE_IRQPORT, CFG_INTERFACE_IRQPIN, CFG_PRINTF_NEWLINE);
 108     #endif
 109   #endif
 110
 111   #if CFG_INTERFACE_LONGSYSINFO
 112     #ifdef CFG_I2CEEPROM
 113       printf("%-25s : %d bytes %s", "EEPROM Size", CFG_I2CEEPROM_SIZE, CFG_PRINTF_NEWLINE);
 114     #endif
 115   #endif
 116
 117   #ifdef CFG_SDCARD
 118     printf("%-25s : %s %s", "SD Card Present", gpioGetValue(CFG_SDCARD_CDPORT, CFG_SDCARD_CDPIN) ? "True" : "False", CFG_PRINTF_NEWLINE);
 119     #if CFG_INTERFACE_LONGSYSINFO
 120       printf("%-25s : %s %s", "FAT File System", CFG_SDCARD_READONLY ? "Read Only" : "Read/Write", CFG_PRINTF_NEWLINE);
 121     #endif
 122   #endif
 123
 124   #ifdef CFG_PRINTF_UART
 125     uart_pcb_t *pcb = uartGetPCB();
 126     printf("%-25s : %u %s", "UART Baud Rate", (unsigned int)(pcb->baudrate), CFG_PRINTF_NEWLINE);
 127   #endif
 128
 129   // TFT LCD Settings (if CFG_TFTLCD enabled)
 130   #ifdef CFG_TFTLCD
 131     printf("%-25s : %d %s", "LCD Width", (int)lcdGetWidth(), CFG_PRINTF_NEWLINE);
 132     printf("%-25s : %d %s", "LCD Height", (int)lcdGetHeight(), CFG_PRINTF_NEWLINE);
 133     #if CFG_INTERFACE_LONGSYSINFO
 134       printf("%-25s : %04X %s", "LCD Controller ID", (unsigned short)lcdGetControllerID(), CFG_PRINTF_NEWLINE);
 135       printf("%-25s : %s %s", "LCD Small Fonts", CFG_TFTLCD_INCLUDESMALLFONTS == 1 ? "True" : "False", CFG_PRINTF_NEWLINE);
 136       printf("%-25s : %s %s", "LCD AA Fonts", CFG_TFTLCD_USEAAFONTS == 1 ? "True" : "False", CFG_PRINTF_NEWLINE);
 137       lcdProperties_t lcdprops = lcdGetProperties();
 138       printf("%-25s : %s %s", "Touch Screen", lcdprops.touchscreen ? "True" : "False", CFG_PRINTF_NEWLINE);
 139       if (lcdprops.touchscreen)
 140       {
 141         printf("%-25s : %s %s", "Touch Screen Calibrated", eepromReadU8(CFG_EEPROM_TOUCHSCREEN_CALIBRATED) == 1 ? "True" : "False", CFG_PRINTF_NEWLINE);
 142         printf("%-25s : %d %s", "Touch Screen Threshold", CFG_TFTLCD_TS_DEFAULTTHRESHOLD, CFG_PRINTF_NEWLINE);
 143       }
 144     #endif
 145   #endif
 146
 147   // Wireless Settings (if CFG_CHIBI enabled)
 148   #ifdef CFG_CHIBI
 149     chb_pcb_t *pcb = chb_get_pcb();
 150     printf("%-25s : %s %s", "Wireless", "AT86RF212", CFG_PRINTF_NEWLINE);
 151     printf("%-25s : 0x%04X %s", "802.15.4 PAN ID", CFG_CHIBI_PANID, CFG_PRINTF_NEWLINE);
 152     printf("%-25s : 0x%04X %s", "802.15.4 Node Address", pcb->src_addr, CFG_PRINTF_NEWLINE);
 153     printf("%-25s : %d %s", "802.15.4 Channel", CFG_CHIBI_CHANNEL, CFG_PRINTF_NEWLINE);
 154   #endif
 155
 156   // System Temperature (if LM75B Present)
 157   #ifdef CFG_LM75B
 158     int32_t temp = 0;
 159     lm75bGetTemperature(&temp);
 160     temp *= 125;
 161     printf("%-25s : %d.%d C %s", "Temperature", temp / 1000, temp % 1000, CFG_PRINTF_NEWLINE);
 162   #endif
 163
 164   // ADC Averaging
 165   #if CFG_INTERFACE_LONGSYSINFO
 166     printf("%-25s : %s %s", "ADC Averaging", ADC_AVERAGING_ENABLE ? "True" : "False", CFG_PRINTF_NEWLINE);
 167     #if ADC_AVERAGING_ENABLE
 168       printf("%-25s : %d %s", "ADC Averaging Samples", ADC_AVERAGING_SAMPLES, CFG_PRINTF_NEWLINE);
 169     #endif
 170   #endif
 171
 172   // Debug LED
 173   #if CFG_INTERFACE_LONGSYSINFO
 174     printf("%-25s : %d.%d %s", "LED Location", CFG_LED_PORT, CFG_LED_PIN, CFG_PRINTF_NEWLINE);
 175   #endif
 176 }