drivers/displays/tft/hw/ILI9328.c

   1 /**************************************************************************/
   2 /*!
   3     @file     ILI9328.c
   4     @author   K. Townsend (microBuilder.eu)
   5
   6     @section  DESCRIPTION
   7
   8     Driver for ILI9328 240x320 pixel TFT LCD displays.
   9
  10     This driver uses an 8-bit interface and a 16-bit RGB565 colour palette.
  11
  12     @section  LICENSE
  13
  14     Software License Agreement (BSD License)
  15
  16     Copyright (c) 2010, microBuilder SARL
  17     All rights reserved.
  18
  19     Redistribution and use in source and binary forms, with or without
  20     modification, are permitted provided that the following conditions are met:
  21     1. Redistributions of source code must retain the above copyright
  22     notice, this list of conditions and the following disclaimer.
  23     2. Redistributions in binary form must reproduce the above copyright
  24     notice, this list of conditions and the following disclaimer in the
  25     documentation and/or other materials provided with the distribution.
  26     3. Neither the name of the copyright holders nor the
  27     names of its contributors may be used to endorse or promote products
  28     derived from this software without specific prior written permission.
  29
  30     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
  31     EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  32     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  33     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
  34     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  35     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  36     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  37     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  38     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  39     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  40 */
  41 /**************************************************************************/
  42 #include "ILI9328.h"
  43 #include "core/systick/systick.h"
  44 #include "drivers/displays/tft/touchscreen.h"
  45
  46 // Uncomment this to use faster inline methods, but requires more flash
  47 #define ILI9238_USE_INLINE_METHODS (1)
  48
  49 static volatile lcdOrientation_t lcdOrientation = LCD_ORIENTATION_PORTRAIT;
  50 static lcdProperties_t ili9328Properties = { 240, 320, TRUE, TRUE, TRUE };
  51
  52 /*************************************************/
  53 /* Private Methods                               */
  54 /*************************************************/
  55
  56 /**************************************************************************/
  57 /*!
  58     @brief  Causes a brief delay (10 ticks per unit)
  59 */
  60 /**************************************************************************/
  61 #if !defined ILI9238_USE_INLINE_METHODS
  62 void ili9328Delay(unsigned int t)
  63 {
  64   unsigned char t1;
  65   while(t--)
  66   for ( t1=10; t1 > 0; t1-- )
  67   {
  68     __asm("nop");
  69   }
  70 }
  71 #else
  72 static inline void ili9328Delay(unsigned int t)     { unsigned char t1; while(t--) for ( t1=10; t1 > 0; t1-- ) { __asm("nop"); } }
  73 #endif
  74
  75 /**************************************************************************/
  76 /*!
  77     @brief  Writes the supplied 16-bit command using an 8-bit interface
  78 */
  79 /**************************************************************************/
  80 #if !defined ILI9238_USE_INLINE_METHODS
  81 void ili9328WriteCmd(uint16_t command)
  82 {
  83   // Compiled with -Os on GCC 4.4 this works out to 25 cycles
  84   // (versus 36 compiled with no optimisations).  I'm not sure it
  85   // can be improved further, so that means 25 cycles/350nS for
  86   // continuous writes (cmd, data, data, data, ...) or ~150 cycles/
  87   // ~2.1uS for a random pixel (Set X [cmd+data], Set Y [cmd+data],
  88   // Set color [cmd+data]) (times assumes 72MHz clock).
  89
  90   CLR_CS_CD_SET_RD_WR;  // Saves 18 commands compared to "CLR_CS; CLR_CD; SET_RD; SET_WR;"
  91   ILI9328_GPIO2DATA_DATA = (command >> (8 - ILI9328_DATA_OFFSET));
  92   CLR_WR;
  93   SET_WR;
  94   ILI9328_GPIO2DATA_DATA = command << ILI9328_DATA_OFFSET;
  95   CLR_WR;
  96   SET_WR_CS;            // Saves 7 commands compared to "SET_WR; SET_CS;"
  97 }
  98 #else
  99 static inline void ili9328WriteCmd(uint16_t command) { CLR_CS_CD_SET_RD_WR; ILI9328_GPIO2DATA_DATA = (command >> (8 - ILI9328_DATA_OFFSET)); CLR_WR; SET_WR; ILI9328_GPIO2DATA_DATA = command << ILI9328_DATA_OFFSET; CLR_WR; SET_WR_CS; }
 100 #endif
 101
 102 /**************************************************************************/
 103 /*!
 104     @brief  Writes the supplied 16-bit data using an 8-bit interface
 105 */
 106 /**************************************************************************/
 107 #if !defined ILI9238_USE_INLINE_METHODS
 108 void ili9328WriteData(uint16_t data)
 109 {
 110   CLR_CS_SET_CD_RD_WR;  // Saves 18 commands compared to SET_CD; SET_RD; SET_WR; CLR_CS"
 111   ILI9328_GPIO2DATA_DATA = (data >> (8 - ILI9328_DATA_OFFSET));
 112   CLR_WR;
 113   SET_WR;
 114   ILI9328_GPIO2DATA_DATA = data << ILI9328_DATA_OFFSET;
 115   CLR_WR;
 116   SET_WR_CS;            // Saves 7 commands compared to "SET_WR, SET_CS;"
 117 }
 118 #else
 119 static inline void ili9328WriteData(uint16_t data) {   CLR_CS_SET_CD_RD_WR; ILI9328_GPIO2DATA_DATA = (data >> (8 - ILI9328_DATA_OFFSET)); CLR_WR; SET_WR; ILI9328_GPIO2DATA_DATA = data << ILI9328_DATA_OFFSET; CLR_WR; SET_WR_CS; }
 120 #endif
 121
 122 /**************************************************************************/
 123 /*!
 124     @brief  Reads a 16-bit value from the 8-bit data bus
 125 */
 126 /**************************************************************************/
 127 uint16_t ili9328ReadData(void)
 128 {
 129   // ToDo: Optimise this method!
 130
 131   uint16_t high, low;
 132   high = low = 0;
 133   uint16_t d;
 134
 135   SET_CD_RD_WR;   // Saves 14 commands compared to "SET_CD; SET_RD; SET_WR"
 136   CLR_CS;
 137
 138   // set inputs
 139   ILI9328_GPIO2DATA_SETINPUT;
 140   CLR_RD;
 141   ili9328Delay(100);
 142   high = ILI9328_GPIO2DATA_DATA;
 143   high >>= ILI9328_DATA_OFFSET;
 144   high &= 0xFF;
 145   SET_RD;
 146
 147   CLR_RD;
 148   ili9328Delay(100);
 149   low = ILI9328_GPIO2DATA_DATA;
 150   low >>= ILI9328_DATA_OFFSET;
 151   low &=0xFF;
 152   SET_RD;
 153
 154   SET_CS;
 155   ILI9328_GPIO2DATA_SETOUTPUT;
 156
 157   d = high;
 158   d <<= 8;
 159   d |= low;
 160
 161   return d;
 162 }
 163
 164 /**************************************************************************/
 165 /*!
 166     @brief  Reads a 16-bit value
 167 */
 168 /**************************************************************************/
 169 uint16_t ili9328Read(uint16_t addr)
 170 {
 171   ili9328WriteCmd(addr);
 172   return ili9328ReadData();
 173 }
 174
 175 /**************************************************************************/
 176 /*!
 177     @brief  Sends a 16-bit command + 16-bit data
 178 */
 179 /**************************************************************************/
 180 void ili9328Command(uint16_t command, uint16_t data)
 181 {
 182   ili9328WriteCmd(command);
 183   ili9328WriteData(data);
 184 }
 185
 186 /**************************************************************************/
 187 /*!
 188     @brief  Returns the 16-bit (4-hexdigit) controller code
 189 */
 190 /**************************************************************************/
 191 uint16_t ili9328Type(void)
 192 {
 193   ili9328WriteCmd(ILI9328_COMMANDS_DRIVERCODEREAD);
 194   return ili9328ReadData();
 195 }
 196
 197 /**************************************************************************/
 198 /*!
 199     @brief  Sets the cursor to the specified X/Y position
 200 */
 201 /**************************************************************************/
 202 #if !defined ILI9238_USE_INLINE_METHODS
 203 void ili9328SetCursor(uint16_t x, uint16_t y)
 204 {
 205   uint16_t al, ah;
 206
 207   if (lcdOrientation == LCD_ORIENTATION_LANDSCAPE)
 208   {
 209     al = y;
 210     ah = x;
 211   }
 212   else
 213   {
 214     al = x;
 215     ah = y;
 216   }
 217
 218   ili9328Command(ILI9328_COMMANDS_HORIZONTALGRAMADDRESSSET, al);
 219   ili9328Command(ILI9328_COMMANDS_VERTICALGRAMADDRESSSET, ah);
 220 }
 221 #else
 222 static inline void ili9328SetCursor(uint16_t x, uint16_t y) { uint16_t al, ah; if (lcdOrientation == LCD_ORIENTATION_LANDSCAPE) { al = y; ah = x; } else { al = x; ah = y; }; ili9328WriteCmd(ILI9328_COMMANDS_HORIZONTALGRAMADDRESSSET); ili9328WriteData(al); ili9328WriteCmd(ILI9328_COMMANDS_VERTICALGRAMADDRESSSET); ili9328WriteData(ah); }
 223 #endif
 224
 225 /**************************************************************************/
 226 /*!
 227     @brief  Sends the initialisation sequence to the display controller
 228 */
 229 /**************************************************************************/
 230 void ili9328InitDisplay(void)
 231 {
 232   // Clear data line
 233   GPIO_GPIO2DATA &= ~ILI9328_DATA_MASK;
 234
 235   SET_RD;
 236   SET_WR;
 237   SET_CS;
 238   SET_CD;
 239
 240   // Reset display
 241   CLR_RESET;
 242   ili9328Delay(100);
 243   SET_RESET;
 244   ili9328Delay(1000);
 245
 246   ili9328Command(ILI9328_COMMANDS_DRIVEROUTPUTCONTROL1, 0x0100);  // Driver Output Control Register (R01h)
 247   ili9328Command(ILI9328_COMMANDS_LCDDRIVINGCONTROL, 0x0700);     // LCD Driving Waveform Control (R02h)
 248   ili9328Command(ILI9328_COMMANDS_ENTRYMODE, 0x1030);             // Entry Mode (R03h)
 249   ili9328Command(ILI9328_COMMANDS_DISPLAYCONTROL2, 0x0302);
 250   ili9328Command(ILI9328_COMMANDS_DISPLAYCONTROL3, 0x0000);
 251   ili9328Command(ILI9328_COMMANDS_DISPLAYCONTROL4, 0x0000);       // Fmark On
 252   ili9328Command(ILI9328_COMMANDS_POWERCONTROL1, 0x0000);         // Power Control 1 (R10h)
 253   ili9328Command(ILI9328_COMMANDS_POWERCONTROL2, 0x0007);         // Power Control 2 (R11h)
 254   ili9328Command(ILI9328_COMMANDS_POWERCONTROL3, 0x0000);         // Power Control 3 (R12h)
 255   ili9328Command(ILI9328_COMMANDS_POWERCONTROL4, 0x0000);         // Power Control 4 (R13h)
 256   ili9328Delay(1000);
 257   ili9328Command(ILI9328_COMMANDS_POWERCONTROL1, 0x14B0);         // Power Control 1 (R10h)
 258   ili9328Delay(500);
 259   ili9328Command(ILI9328_COMMANDS_POWERCONTROL2, 0x0007);         // Power Control 2 (R11h)
 260   ili9328Delay(500);
 261   ili9328Command(ILI9328_COMMANDS_POWERCONTROL3, 0x008E);         // Power Control 3 (R12h)
 262   ili9328Command(ILI9328_COMMANDS_POWERCONTROL4, 0x0C00);         // Power Control 4 (R13h)
 263   ili9328Command(ILI9328_COMMANDS_POWERCONTROL7, 0x0015);         // NVM read data 2 (R29h)
 264   ili9328Delay(500);
 265   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL1, 0x0000);         // Gamma Control 1
 266   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL2, 0x0107);         // Gamma Control 2
 267   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL3, 0x0000);         // Gamma Control 3
 268   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL4, 0x0203);         // Gamma Control 4
 269   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL5, 0x0402);         // Gamma Control 5
 270   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL6, 0x0000);         // Gamma Control 6
 271   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL7, 0x0207);         // Gamma Control 7
 272   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL8, 0x0000);         // Gamma Control 8
 273   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL9, 0x0203);         // Gamma Control 9
 274   ili9328Command(ILI9328_COMMANDS_GAMMACONTROL10, 0x0403);        // Gamma Control 10
 275   ili9328Command(ILI9328_COMMANDS_HORIZONTALADDRESSSTARTPOSITION, 0x0000);                      // Window Horizontal RAM Address Start (R50h)
 276   ili9328Command(ILI9328_COMMANDS_HORIZONTALADDRESSENDPOSITION, ili9328Properties.width - 1);   // Window Horizontal RAM Address End (R51h)
 277   ili9328Command(ILI9328_COMMANDS_VERTICALADDRESSSTARTPOSITION, 0X0000);                        // Window Vertical RAM Address Start (R52h)
 278   ili9328Command(ILI9328_COMMANDS_VERTICALADDRESSENDPOSITION, ili9328Properties.height - 1);    // Window Vertical RAM Address End (R53h)
 279   ili9328Command(ILI9328_COMMANDS_DRIVEROUTPUTCONTROL2, 0xa700);    // Driver Output Control (R60h)
 280   ili9328Command(ILI9328_COMMANDS_BASEIMAGEDISPLAYCONTROL, 0x0003); // Driver Output Control (R61h) - enable VLE
 281   ili9328Command(ILI9328_COMMANDS_PANELINTERFACECONTROL1, 0X0010);  // Panel Interface Control 1 (R90h)
 282
 283   // Display On
 284   ili9328Command(ILI9328_COMMANDS_DISPLAYCONTROL1, 0x0133);     // Display Control (R07h)
 285   ili9328Delay(500);
 286   ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);
 287 }
 288
 289 /**************************************************************************/
 290 /*!
 291     @brief  Sets the cursor to the home position (0,0)
 292 */
 293 /**************************************************************************/
 294 void ili9328Home(void)
 295 {
 296   ili9328SetCursor(0, 0);
 297   ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);            // Write Data to GRAM (R22h)
 298 }
 299
 300 /**************************************************************************/
 301 /*!
 302     @brief  Sets the window confines
 303 */
 304 /**************************************************************************/
 305 void ili9328SetWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1)
 306 {
 307   ili9328Command(ILI9328_COMMANDS_HORIZONTALADDRESSSTARTPOSITION, x0);
 308   ili9328Command(ILI9328_COMMANDS_HORIZONTALADDRESSENDPOSITION, x1);
 309   ili9328Command(ILI9328_COMMANDS_VERTICALADDRESSSTARTPOSITION, y0);
 310   ili9328Command(ILI9328_COMMANDS_VERTICALADDRESSENDPOSITION, y1);
 311   ili9328SetCursor(x0, y0);
 312 }
 313
 314 /*************************************************/
 315 /* Public Methods                                */
 316 /*************************************************/
 317
 318 /**************************************************************************/
 319 /*!
 320     @brief  Configures any pins or HW and initialises the LCD controller
 321 */
 322 /**************************************************************************/
 323 void lcdInit(void)
 324 {
 325   // Set control line pins to output
 326   gpioSetDir(ILI9328_CS_PORT, ILI9328_CS_PIN, 1);
 327   gpioSetDir(ILI9328_CD_PORT, ILI9328_CD_PIN, 1);
 328   gpioSetDir(ILI9328_WR_PORT, ILI9328_WR_PIN, 1);
 329   gpioSetDir(ILI9328_RD_PORT, ILI9328_RD_PIN, 1);
 330
 331   // Set data port pins to output
 332   ILI9328_GPIO2DATA_SETOUTPUT;
 333
 334   // Disable pullups
 335   ILI9328_DISABLEPULLUPS();
 336
 337   // Set backlight pin to output and turn it on
 338   gpioSetDir(ILI9328_BL_PORT, ILI9328_BL_PIN, 1);      // set to output
 339   lcdBacklight(TRUE);
 340
 341   // Set reset pin to output
 342   gpioSetDir(ILI9328_RES_PORT, ILI9328_RES_PIN, 1);    // Set to output
 343   gpioSetValue(ILI9328_RES_PORT, ILI9328_RES_PIN, 0);  // Low to reset
 344   systickDelay(50);
 345   gpioSetValue(ILI9328_RES_PORT, ILI9328_RES_PIN, 1);  // High to exit
 346
 347   // Initialize the display
 348   ili9328InitDisplay();
 349
 350   systickDelay(50);
 351
 352   // Set lcd to default orientation
 353   lcdSetOrientation(lcdOrientation);
 354
 355   // Fill black
 356   lcdFillRGB(COLOR_BLACK);
 357
 358   // Initialise the touch screen (and calibrate if necessary)
 359   tsInit();
 360 }
 361
 362 /**************************************************************************/
 363 /*!
 364     @brief  Enables or disables the LCD backlight
 365 */
 366 /**************************************************************************/
 367 void lcdBacklight(bool state)
 368 {
 369   // Set the backlight
 370   gpioSetValue(ILI9328_BL_PORT, ILI9328_BL_PIN, state ? 0 : 1);
 371 }
 372
 373 /**************************************************************************/
 374 /*!
 375     @brief  Renders a simple test pattern on the LCD
 376 */
 377 /**************************************************************************/
 378 void lcdTest(void)
 379 {
 380   uint32_t i,j;
 381   ili9328Home();
 382
 383   for(i=0;i<320;i++)
 384   {
 385     for(j=0;j<240;j++)
 386     {
 387       if(i>279)ili9328WriteData(COLOR_WHITE);
 388       else if(i>239)ili9328WriteData(COLOR_BLUE);
 389       else if(i>199)ili9328WriteData(COLOR_GREEN);
 390       else if(i>159)ili9328WriteData(COLOR_CYAN);
 391       else if(i>119)ili9328WriteData(COLOR_RED);
 392       else if(i>79)ili9328WriteData(COLOR_MAGENTA);
 393       else if(i>39)ili9328WriteData(COLOR_YELLOW);
 394       else ili9328WriteData(COLOR_BLACK);
 395     }
 396   }
 397 }
 398
 399 /**************************************************************************/
 400 /*!
 401     @brief  Fills the LCD with the specified 16-bit color
 402 */
 403 /**************************************************************************/
 404 void lcdFillRGB(uint16_t data)
 405 {
 406   unsigned int i;
 407   ili9328Home();
 408
 409   uint32_t pixels = 320*240;
 410   for ( i=0; i < pixels; i++ )
 411   {
 412     ili9328WriteData(data);
 413   }
 414 }
 415
 416 /**************************************************************************/
 417 /*!
 418     @brief  Draws a single pixel at the specified X/Y location
 419 */
 420 /**************************************************************************/
 421 void lcdDrawPixel(uint16_t x, uint16_t y, uint16_t color)
 422 {
 423   ili9328SetCursor(x, y);
 424   ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);  // Write Data to GRAM (R22h)
 425   ili9328WriteData(color);
 426 }
 427
 428 /**************************************************************************/
 429 /*!
 430     @brief  Draws an array of consecutive RGB565 pixels (much
 431             faster than addressing each pixel individually)
 432 */
 433 /**************************************************************************/
 434 void lcdDrawPixels(uint16_t x, uint16_t y, uint16_t *data, uint32_t len)
 435 {
 436   uint32_t i = 0;
 437   ili9328SetCursor(x, y);
 438   ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);
 439   do
 440   {
 441     ili9328WriteData(data[i]);
 442     i++;
 443   } while (i<len);
 444 }
 445
 446 /**************************************************************************/
 447 /*!
 448     @brief  Optimised routine to draw a horizontal line faster than
 449             setting individual pixels
 450 */
 451 /**************************************************************************/
 452 void lcdDrawHLine(uint16_t x0, uint16_t x1, uint16_t y, uint16_t color)
 453 {
 454   // Allows for slightly better performance than setting individual pixels
 455   uint16_t x, pixels;
 456
 457   if (x1 < x0)
 458   {
 459     // Switch x1 and x0
 460     x = x1;
 461     x1 = x0;
 462     x0 = x;
 463   }
 464
 465   // Check limits
 466   if (x1 >= lcdGetWidth())
 467   {
 468     x1 = lcdGetWidth() - 1;
 469   }
 470   if (x0 >= lcdGetWidth())
 471   {
 472     x0 = lcdGetWidth() - 1;
 473   }
 474
 475   ili9328SetCursor(x0, y);
 476   ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);  // Write Data to GRAM (R22h)
 477   for (pixels = 0; pixels < x1 - x0 + 1; pixels++)
 478   {
 479     ili9328WriteData(color);
 480   }
 481 }
 482
 483 /**************************************************************************/
 484 /*!
 485     @brief  Optimised routine to draw a vertical line faster than
 486             setting individual pixels
 487 */
 488 /**************************************************************************/
 489 void lcdDrawVLine(uint16_t x, uint16_t y0, uint16_t y1, uint16_t color)
 490 {
 491   lcdOrientation_t oldOrientation = lcdOrientation;
 492
 493   if (oldOrientation == LCD_ORIENTATION_PORTRAIT)
 494   {
 495     lcdSetOrientation(LCD_ORIENTATION_LANDSCAPE);
 496     lcdDrawHLine(y0, y1, lcdGetHeight() - (x + 1), color);
 497   }
 498   else
 499   {
 500     lcdSetOrientation(LCD_ORIENTATION_PORTRAIT);
 501     lcdDrawHLine(lcdGetWidth() - (y0 + 1), lcdGetWidth() - (y1 + 1), x, color);
 502   }
 503
 504   // Switch orientation back
 505   lcdSetOrientation(oldOrientation);
 506 }
 507
 508 /**************************************************************************/
 509 /*!
 510     @brief  Gets the 16-bit color of the pixel at the specified location
 511 */
 512 /**************************************************************************/
 513 uint16_t lcdGetPixel(uint16_t x, uint16_t y)
 514 {
 515   ili9328SetCursor(x, y);
 516   ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);
 517   // prefetch
 518   ili9328ReadData();
 519
 520   // Eeek ... why does this need to be done twice for a proper value?!?
 521   ili9328SetCursor(x, y);
 522   ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);
 523   return ili9328ReadData();
 524 }
 525
 526 /**************************************************************************/
 527 /*!
 528     @brief  Sets the LCD orientation to horizontal and vertical
 529 */
 530 /**************************************************************************/
 531 void lcdSetOrientation(lcdOrientation_t orientation)
 532 {
 533   uint16_t entryMode = 0x1030;
 534   uint16_t outputControl = 0x0100;
 535
 536   switch (orientation)
 537   {
 538     case LCD_ORIENTATION_PORTRAIT:
 539       entryMode = 0x1030;
 540       outputControl = 0x0100;
 541       break;
 542     case LCD_ORIENTATION_LANDSCAPE:
 543       entryMode = 0x1028;
 544       outputControl = 0x0000;
 545       break;
 546   }
 547
 548   ili9328Command(ILI9328_COMMANDS_ENTRYMODE, entryMode);
 549   ili9328Command(ILI9328_COMMANDS_DRIVEROUTPUTCONTROL1, outputControl);
 550   lcdOrientation = orientation;
 551
 552   ili9328SetCursor(0, 0);
 553 }
 554
 555 /**************************************************************************/
 556 /*!
 557     @brief  Gets the current screen orientation (horizontal or vertical)
 558 */
 559 /**************************************************************************/
 560 lcdOrientation_t lcdGetOrientation(void)
 561 {
 562   return lcdOrientation;
 563 }
 564
 565 /**************************************************************************/
 566 /*!
 567     @brief  Gets the width in pixels of the LCD screen (varies depending
 568             on the current screen orientation)
 569 */
 570 /**************************************************************************/
 571 uint16_t lcdGetWidth(void)
 572 {
 573   switch (lcdOrientation)
 574   {
 575     case LCD_ORIENTATION_PORTRAIT:
 576       return ili9328Properties.width;
 577       break;
 578     case LCD_ORIENTATION_LANDSCAPE:
 579     default:
 580       return ili9328Properties.height;
 581   }
 582 }
 583
 584 /**************************************************************************/
 585 /*!
 586     @brief  Gets the height in pixels of the LCD screen (varies depending
 587             on the current screen orientation)
 588 */
 589 /**************************************************************************/
 590 uint16_t lcdGetHeight(void)
 591 {
 592   switch (lcdOrientation)
 593   {
 594     case LCD_ORIENTATION_PORTRAIT:
 595       return ili9328Properties.height;
 596       break;
 597     case LCD_ORIENTATION_LANDSCAPE:
 598     default:
 599       return ili9328Properties.width;
 600   }
 601 }
 602
 603 /**************************************************************************/
 604 /*!
 605     @brief  Scrolls the contents of the LCD screen vertically the
 606             specified number of pixels using a HW optimised routine
 607 */
 608 /**************************************************************************/
 609 void lcdScroll(int16_t pixels, uint16_t fillColor)
 610 {
 611   int16_t y = pixels;
 612   while (y < 0)
 613     y += 320;
 614   while (y >= 320)
 615     y -= 320;
 616   ili9328WriteCmd(ILI9328_COMMANDS_VERTICALSCROLLCONTROL);
 617   ili9328WriteData(y);
 618 }
 619
 620 /**************************************************************************/
 621 /*!
 622     @brief  Gets the controller's 16-bit (4 hexdigit) ID
 623 */
 624 /**************************************************************************/
 625 uint16_t lcdGetControllerID(void)
 626 {
 627   return ili9328Type();
 628 }
 629
 630 /**************************************************************************/
 631 /*!
 632     @brief  Returns the LCDs 'lcdProperties_t' that describes the LCDs
 633             generic capabilities and dimensions
 634 */
 635 /**************************************************************************/
 636 lcdProperties_t lcdGetProperties(void)
 637 {
 638     return ili9328Properties;
 639 }