target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch

   1 Index: linux-2.4.35.4/drivers/pcmcia/yenta.c
   2 ===================================================================
   3 --- linux-2.4.35.4.orig/drivers/pcmcia/yenta.c  2007-12-15 05:19:36.066476349 +0100
   4 +++ linux-2.4.35.4/drivers/pcmcia/yenta.c       2007-12-15 05:20:16.268767348 +0100
   5 @@ -543,6 +543,9 @@
   6          * Probe for usable interrupts using the force
   7          * register to generate bogus card status events.
   8          */
   9 +
  10 +#ifndef CONFIG_BCM947XX
  11 +       /* WRT54G3G does not like this */
  12         cb_writel(socket, CB_SOCKET_EVENT, -1);
  13         cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
  14         exca_writeb(socket, I365_CSCINT, 0);
  15 @@ -557,7 +560,8 @@
  16         }
  17         cb_writel(socket, CB_SOCKET_MASK, 0);
  18         exca_writeb(socket, I365_CSCINT, 0);
  19 -
  20 +#endif
  21 +
  22         mask = probe_irq_mask(val) & 0xffff;
  23
  24         bridge_ctrl &= ~CB_BRIDGE_INTR;
  25 @@ -578,6 +582,12 @@
  26         socket->cap.cb_dev = socket->dev;
  27         socket->cap.bus = NULL;
  28
  29 +#ifdef CONFIG_BCM947XX
  30 +       /* irq mask probing is broken for the WRT54G3G */
  31 +       if (socket->cap.irq_mask == 0)
  32 +               socket->cap.irq_mask = 0x6f8;
  33 +#endif
  34 +
  35         printk(KERN_INFO "Yenta ISA IRQ mask 0x%04x, PCI irq %d\n",
  36                socket->cap.irq_mask, socket->cb_irq);
  37  }
  38 @@ -609,6 +619,15 @@
  39         printk(KERN_INFO "Socket status: %08x\n",
  40                cb_readl(socket, CB_SOCKET_STATE));
  41
  42 +       /* Generate an interrupt on card insert/remove */
  43 +       config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
  44 +
  45 +       /* Set up Multifunction Routing Status Register */
  46 +       config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
  47 +
  48 +       /* Switch interrupts to parallelized */
  49 +       config_writeb(socket, 0x92, 0x64);
  50 +
  51         /* Register it with the pcmcia layer.. */
  52         cardbus_register(socket);
  53
  54 @@ -731,7 +750,7 @@
  55  {
  56         struct pci_bus *bus;
  57         struct resource *root, *res;
  58 -       u32 start, end;
  59 +       u32 start = 0, end = 0;
  60         u32 align, size, min, max;
  61         unsigned offset;
  62         unsigned mask;
  63 @@ -750,6 +769,15 @@
  64         res->end = 0;
  65         root = pci_find_parent_resource(socket->dev, res);
  66
  67 +#ifdef CONFIG_BCM947XX
  68 +       /* default mem resources are completely fscked up on the wrt54g3g */
  69 +       /* bypass the entire resource allocation stuff below and just set it statically */
  70 +       if (type & IORESOURCE_MEM) {
  71 +               res->start = 0x40004000;
  72 +               res->end = res->start + 0x3fff;
  73 +       }
  74 +
  75 +#else
  76         if (!root)
  77                 return;
  78
  79 @@ -794,6 +822,7 @@
  80                 res->start = res->end = 0;
  81                 return;
  82         }
  83 +#endif
  84
  85         config_writel(socket, offset, res->start);
  86         config_writel(socket, offset+4, res->end);