remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
[openwrt.git] / target / linux / generic / files / drivers / net / phy / ar8216.c
1 /*
2 * ar8216.c: AR8216 switch driver
3 *
4 * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version 2
9 * of the License, or (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 */
16
17 #include <linux/if.h>
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/list.h>
21 #include <linux/if_ether.h>
22 #include <linux/skbuff.h>
23 #include <linux/netdevice.h>
24 #include <linux/netlink.h>
25 #include <linux/bitops.h>
26 #include <net/genetlink.h>
27 #include <linux/switch.h>
28 #include <linux/delay.h>
29 #include <linux/phy.h>
30 #include <linux/netdevice.h>
31 #include <linux/etherdevice.h>
32 #include "ar8216.h"
33
34 /* size of the vlan table */
35 #define AR8X16_MAX_VLANS 128
36 #define AR8X16_PROBE_RETRIES 10
37
38 struct ar8216_priv {
39 struct switch_dev dev;
40 struct phy_device *phy;
41 u32 (*read)(struct ar8216_priv *priv, int reg);
42 void (*write)(struct ar8216_priv *priv, int reg, u32 val);
43 const struct net_device_ops *ndo_old;
44 struct net_device_ops ndo;
45 struct mutex reg_mutex;
46 int chip;
47 bool initialized;
48 bool port4_phy;
49
50 /* all fields below are cleared on reset */
51 bool vlan;
52 u16 vlan_id[AR8X16_MAX_VLANS];
53 u8 vlan_table[AR8X16_MAX_VLANS];
54 u8 vlan_tagged;
55 u16 pvid[AR8216_NUM_PORTS];
56 };
57
58 #define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
59
60 static inline void
61 split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
62 {
63 regaddr >>= 1;
64 *r1 = regaddr & 0x1e;
65
66 regaddr >>= 5;
67 *r2 = regaddr & 0x7;
68
69 regaddr >>= 3;
70 *page = regaddr & 0x1ff;
71 }
72
73 static u32
74 ar8216_mii_read(struct ar8216_priv *priv, int reg)
75 {
76 struct phy_device *phy = priv->phy;
77 u16 r1, r2, page;
78 u16 lo, hi;
79
80 split_addr((u32) reg, &r1, &r2, &page);
81 phy->bus->write(phy->bus, 0x18, 0, page);
82 msleep(1); /* wait for the page switch to propagate */
83 lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
84 hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
85
86 return (hi << 16) | lo;
87 }
88
89 static void
90 ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
91 {
92 struct phy_device *phy = priv->phy;
93 u16 r1, r2, r3;
94 u16 lo, hi;
95
96 split_addr((u32) reg, &r1, &r2, &r3);
97 phy->bus->write(phy->bus, 0x18, 0, r3);
98 msleep(1); /* wait for the page switch to propagate */
99
100 lo = val & 0xffff;
101 hi = (u16) (val >> 16);
102 phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi);
103 phy->bus->write(phy->bus, 0x10 | r2, r1, lo);
104 }
105
106 static u32
107 ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
108 {
109 u32 v;
110
111 v = priv->read(priv, reg);
112 v &= ~mask;
113 v |= val;
114 priv->write(priv, reg, v);
115
116 return v;
117 }
118
119 static inline int
120 ar8216_id_chip(struct ar8216_priv *priv)
121 {
122 u32 val;
123 u16 id;
124 int i;
125
126 val = ar8216_mii_read(priv, AR8216_REG_CTRL);
127 if (val == ~0)
128 return UNKNOWN;
129
130 id = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
131 for (i = 0; i < AR8X16_PROBE_RETRIES; i++) {
132 u16 t;
133
134 val = ar8216_mii_read(priv, AR8216_REG_CTRL);
135 if (val == ~0)
136 return UNKNOWN;
137
138 t = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
139 if (t != id)
140 return UNKNOWN;
141 }
142
143 switch (id) {
144 case 0x0101:
145 return AR8216;
146 case 0x1000:
147 case 0x1001:
148 return AR8316;
149 default:
150 printk(KERN_DEBUG
151 "ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
152 (int)(id >> AR8216_CTRL_VERSION_S),
153 (int)(id & AR8216_CTRL_REVISION),
154 priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 2),
155 priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 3));
156
157 return UNKNOWN;
158 }
159 }
160
161 static int
162 ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
163 struct switch_val *val)
164 {
165 struct ar8216_priv *priv = to_ar8216(dev);
166 priv->vlan = !!val->value.i;
167 return 0;
168 }
169
170 static int
171 ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
172 struct switch_val *val)
173 {
174 struct ar8216_priv *priv = to_ar8216(dev);
175 val->value.i = priv->vlan;
176 return 0;
177 }
178
179
180 static int
181 ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
182 {
183 struct ar8216_priv *priv = to_ar8216(dev);
184
185 /* make sure no invalid PVIDs get set */
186
187 if (vlan >= dev->vlans)
188 return -EINVAL;
189
190 priv->pvid[port] = vlan;
191 return 0;
192 }
193
194 static int
195 ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan)
196 {
197 struct ar8216_priv *priv = to_ar8216(dev);
198 *vlan = priv->pvid[port];
199 return 0;
200 }
201
202 static int
203 ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
204 struct switch_val *val)
205 {
206 struct ar8216_priv *priv = to_ar8216(dev);
207 priv->vlan_id[val->port_vlan] = val->value.i;
208 return 0;
209 }
210
211 static int
212 ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
213 struct switch_val *val)
214 {
215 struct ar8216_priv *priv = to_ar8216(dev);
216 val->value.i = priv->vlan_id[val->port_vlan];
217 return 0;
218 }
219
220
221 static int
222 ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
223 {
224 struct ar8216_priv *priv = dev->phy_ptr;
225 unsigned char *buf;
226
227 if (unlikely(!priv))
228 goto error;
229
230 if (!priv->vlan)
231 goto send;
232
233 if (unlikely(skb_headroom(skb) < 2)) {
234 if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
235 goto error;
236 }
237
238 buf = skb_push(skb, 2);
239 buf[0] = 0x10;
240 buf[1] = 0x80;
241
242 send:
243 return priv->ndo_old->ndo_start_xmit(skb, dev);
244
245 error:
246 dev_kfree_skb_any(skb);
247 return 0;
248 }
249
250 static int
251 ar8216_mangle_rx(struct sk_buff *skb, int napi)
252 {
253 struct ar8216_priv *priv;
254 struct net_device *dev;
255 unsigned char *buf;
256 int port, vlan;
257
258 dev = skb->dev;
259 if (!dev)
260 goto error;
261
262 priv = dev->phy_ptr;
263 if (!priv)
264 goto error;
265
266 /* don't strip the header if vlan mode is disabled */
267 if (!priv->vlan)
268 goto recv;
269
270 /* strip header, get vlan id */
271 buf = skb->data;
272 skb_pull(skb, 2);
273
274 /* check for vlan header presence */
275 if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
276 goto recv;
277
278 port = buf[0] & 0xf;
279
280 /* no need to fix up packets coming from a tagged source */
281 if (priv->vlan_tagged & (1 << port))
282 goto recv;
283
284 /* lookup port vid from local table, the switch passes an invalid vlan id */
285 vlan = priv->vlan_id[priv->pvid[port]];
286
287 buf[14 + 2] &= 0xf0;
288 buf[14 + 2] |= vlan >> 8;
289 buf[15 + 2] = vlan & 0xff;
290
291 recv:
292 skb->protocol = eth_type_trans(skb, skb->dev);
293
294 if (napi)
295 return netif_receive_skb(skb);
296 else
297 return netif_rx(skb);
298
299 error:
300 /* no vlan? eat the packet! */
301 dev_kfree_skb_any(skb);
302 return NET_RX_DROP;
303 }
304
305 static int
306 ar8216_netif_rx(struct sk_buff *skb)
307 {
308 return ar8216_mangle_rx(skb, 0);
309 }
310
311 static int
312 ar8216_netif_receive_skb(struct sk_buff *skb)
313 {
314 return ar8216_mangle_rx(skb, 1);
315 }
316
317
318 static struct switch_attr ar8216_globals[] = {
319 {
320 .type = SWITCH_TYPE_INT,
321 .name = "enable_vlan",
322 .description = "Enable VLAN mode",
323 .set = ar8216_set_vlan,
324 .get = ar8216_get_vlan,
325 .max = 1
326 },
327 };
328
329 static struct switch_attr ar8216_port[] = {
330 };
331
332 static struct switch_attr ar8216_vlan[] = {
333 {
334 .type = SWITCH_TYPE_INT,
335 .name = "vid",
336 .description = "VLAN ID (0-4094)",
337 .set = ar8216_set_vid,
338 .get = ar8216_get_vid,
339 .max = 4094,
340 },
341 };
342
343
344 static int
345 ar8216_get_ports(struct switch_dev *dev, struct switch_val *val)
346 {
347 struct ar8216_priv *priv = to_ar8216(dev);
348 u8 ports = priv->vlan_table[val->port_vlan];
349 int i;
350
351 val->len = 0;
352 for (i = 0; i < AR8216_NUM_PORTS; i++) {
353 struct switch_port *p;
354
355 if (!(ports & (1 << i)))
356 continue;
357
358 p = &val->value.ports[val->len++];
359 p->id = i;
360 if (priv->vlan_tagged & (1 << i))
361 p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
362 else
363 p->flags = 0;
364 }
365 return 0;
366 }
367
368 static int
369 ar8216_set_ports(struct switch_dev *dev, struct switch_val *val)
370 {
371 struct ar8216_priv *priv = to_ar8216(dev);
372 u8 *vt = &priv->vlan_table[val->port_vlan];
373 int i, j;
374
375 *vt = 0;
376 for (i = 0; i < val->len; i++) {
377 struct switch_port *p = &val->value.ports[i];
378
379 if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
380 priv->vlan_tagged |= (1 << p->id);
381 else {
382 priv->vlan_tagged &= ~(1 << p->id);
383 priv->pvid[p->id] = val->port_vlan;
384
385 /* make sure that an untagged port does not
386 * appear in other vlans */
387 for (j = 0; j < AR8X16_MAX_VLANS; j++) {
388 if (j == val->port_vlan)
389 continue;
390 priv->vlan_table[j] &= ~(1 << p->id);
391 }
392 }
393
394 *vt |= 1 << p->id;
395 }
396 return 0;
397 }
398
399 static int
400 ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
401 {
402 int timeout = 20;
403
404 while ((priv->read(priv, reg) & mask) != val) {
405 if (timeout-- <= 0) {
406 printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n");
407 return 1;
408 }
409 }
410 return 0;
411 }
412
413 static void
414 ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
415 {
416 if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
417 return;
418 if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
419 val &= AR8216_VTUDATA_MEMBER;
420 val |= AR8216_VTUDATA_VALID;
421 priv->write(priv, AR8216_REG_VTU_DATA, val);
422 }
423 op |= AR8216_VTU_ACTIVE;
424 priv->write(priv, AR8216_REG_VTU, op);
425 }
426
427 static int
428 ar8216_hw_apply(struct switch_dev *dev)
429 {
430 struct ar8216_priv *priv = to_ar8216(dev);
431 u8 portmask[AR8216_NUM_PORTS];
432 int i, j;
433
434 mutex_lock(&priv->reg_mutex);
435 /* flush all vlan translation unit entries */
436 ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
437
438 memset(portmask, 0, sizeof(portmask));
439 if (priv->vlan) {
440 /* calculate the port destination masks and load vlans
441 * into the vlan translation unit */
442 for (j = 0; j < AR8X16_MAX_VLANS; j++) {
443 u8 vp = priv->vlan_table[j];
444
445 if (!vp)
446 continue;
447
448 for (i = 0; i < AR8216_NUM_PORTS; i++) {
449 u8 mask = (1 << i);
450 if (vp & mask)
451 portmask[i] |= vp & ~mask;
452 }
453
454 ar8216_vtu_op(priv,
455 AR8216_VTU_OP_LOAD |
456 (priv->vlan_id[j] << AR8216_VTU_VID_S),
457 priv->vlan_table[j]);
458 }
459 } else {
460 /* vlan disabled:
461 * isolate all ports, but connect them to the cpu port */
462 for (i = 0; i < AR8216_NUM_PORTS; i++) {
463 if (i == AR8216_PORT_CPU)
464 continue;
465
466 portmask[i] = 1 << AR8216_PORT_CPU;
467 portmask[AR8216_PORT_CPU] |= (1 << i);
468 }
469 }
470
471 /* update the port destination mask registers and tag settings */
472 for (i = 0; i < AR8216_NUM_PORTS; i++) {
473 int egress, ingress;
474 int pvid;
475
476 if (priv->vlan) {
477 pvid = priv->vlan_id[priv->pvid[i]];
478 } else {
479 pvid = i;
480 }
481
482 if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
483 egress = AR8216_OUT_ADD_VLAN;
484 } else {
485 egress = AR8216_OUT_STRIP_VLAN;
486 }
487 if (priv->vlan) {
488 ingress = AR8216_IN_SECURE;
489 } else {
490 ingress = AR8216_IN_PORT_ONLY;
491 }
492
493 ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
494 AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
495 AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
496 AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
497 AR8216_PORT_CTRL_LEARN |
498 (priv->vlan && i == AR8216_PORT_CPU && (priv->chip == AR8216) ?
499 AR8216_PORT_CTRL_HEADER : 0) |
500 (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
501 (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
502
503 ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
504 AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
505 AR8216_PORT_VLAN_DEFAULT_ID,
506 (portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) |
507 (ingress << AR8216_PORT_VLAN_MODE_S) |
508 (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
509 }
510 mutex_unlock(&priv->reg_mutex);
511 return 0;
512 }
513
514 static int
515 ar8316_hw_init(struct ar8216_priv *priv) {
516 int i;
517 u32 val, newval;
518 struct mii_bus *bus;
519
520 val = priv->read(priv, 0x8);
521
522 if (priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
523 if (priv->port4_phy) {
524 /* value taken from Ubiquiti RouterStation Pro */
525 newval = 0x81461bea;
526 printk(KERN_INFO "ar8316: Using port 4 as PHY\n");
527 } else {
528 newval = 0x01261be2;
529 printk(KERN_INFO "ar8316: Using port 4 as switch port\n");
530 }
531 } else if (priv->phy->interface == PHY_INTERFACE_MODE_GMII) {
532 /* value taken from AVM Fritz!Box 7390 sources */
533 newval = 0x010e5b71;
534 } else {
535 /* no known value for phy interface */
536 printk(KERN_ERR "ar8316: unsupported mii mode: %d.\n",
537 priv->phy->interface);
538 return -EINVAL;
539 }
540
541 if (val == newval)
542 goto out;
543
544 priv->write(priv, 0x8, newval);
545
546 /* standard atheros magic */
547 priv->write(priv, 0x38, 0xc000050e);
548
549 /* Initialize the ports */
550 bus = priv->phy->bus;
551 for (i = 0; i < 5; i++) {
552 if ((i == 4) && priv->port4_phy &&
553 priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
554 /* work around for phy4 rgmii mode */
555 bus->write(bus, i, MII_ATH_DBG_ADDR, 0x12);
556 bus->write(bus, i, MII_ATH_DBG_DATA, 0x480c);
557 /* rx delay */
558 bus->write(bus, i, MII_ATH_DBG_ADDR, 0x0);
559 bus->write(bus, i, MII_ATH_DBG_DATA, 0x824e);
560 /* tx delay */
561 bus->write(bus, i, MII_ATH_DBG_ADDR, 0x5);
562 bus->write(bus, i, MII_ATH_DBG_DATA, 0x3d47);
563 msleep(1000);
564 }
565
566 /* initialize the port itself */
567 bus->write(bus, i, MII_ADVERTISE,
568 ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
569 bus->write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
570 bus->write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
571 msleep(1000);
572 }
573
574 out:
575 priv->initialized = true;
576 return 0;
577 }
578
579 static int
580 ar8216_reset_switch(struct switch_dev *dev)
581 {
582 struct ar8216_priv *priv = to_ar8216(dev);
583 int i;
584
585 mutex_lock(&priv->reg_mutex);
586 memset(&priv->vlan, 0, sizeof(struct ar8216_priv) -
587 offsetof(struct ar8216_priv, vlan));
588 for (i = 0; i < AR8X16_MAX_VLANS; i++) {
589 priv->vlan_id[i] = i;
590 }
591 for (i = 0; i < AR8216_NUM_PORTS; i++) {
592 /* Enable port learning and tx */
593 priv->write(priv, AR8216_REG_PORT_CTRL(i),
594 AR8216_PORT_CTRL_LEARN |
595 (4 << AR8216_PORT_CTRL_STATE_S));
596
597 priv->write(priv, AR8216_REG_PORT_VLAN(i), 0);
598
599 /* Configure all PHYs */
600 if (i == AR8216_PORT_CPU) {
601 priv->write(priv, AR8216_REG_PORT_STATUS(i),
602 AR8216_PORT_STATUS_LINK_UP |
603 ((priv->chip == AR8316) ?
604 AR8216_PORT_SPEED_1000M : AR8216_PORT_SPEED_100M) |
605 AR8216_PORT_STATUS_TXMAC |
606 AR8216_PORT_STATUS_RXMAC |
607 ((priv->chip == AR8316) ? AR8216_PORT_STATUS_RXFLOW : 0) |
608 ((priv->chip == AR8316) ? AR8216_PORT_STATUS_TXFLOW : 0) |
609 AR8216_PORT_STATUS_DUPLEX);
610 } else {
611 priv->write(priv, AR8216_REG_PORT_STATUS(i),
612 AR8216_PORT_STATUS_LINK_AUTO);
613 }
614 }
615 /* XXX: undocumented magic from atheros, required! */
616 priv->write(priv, 0x38, 0xc000050e);
617
618 if (priv->chip == AR8216) {
619 ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
620 AR8216_GCTRL_MTU, 1518 + 8 + 2);
621 } else if (priv->chip == AR8316) {
622 /* enable jumbo frames */
623 ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
624 AR8316_GCTRL_MTU, 9018 + 8 + 2);
625 }
626
627 if (priv->chip == AR8316) {
628 /* enable cpu port to receive multicast and broadcast frames */
629 priv->write(priv, AR8216_REG_FLOOD_MASK, 0x003f003f);
630 }
631 mutex_unlock(&priv->reg_mutex);
632 return ar8216_hw_apply(dev);
633 }
634
635
636 static const struct switch_dev_ops ar8216_ops = {
637 .attr_global = {
638 .attr = ar8216_globals,
639 .n_attr = ARRAY_SIZE(ar8216_globals),
640 },
641 .attr_port = {
642 .attr = ar8216_port,
643 .n_attr = ARRAY_SIZE(ar8216_port),
644 },
645 .attr_vlan = {
646 .attr = ar8216_vlan,
647 .n_attr = ARRAY_SIZE(ar8216_vlan),
648 },
649 .get_port_pvid = ar8216_get_pvid,
650 .set_port_pvid = ar8216_set_pvid,
651 .get_vlan_ports = ar8216_get_ports,
652 .set_vlan_ports = ar8216_set_ports,
653 .apply_config = ar8216_hw_apply,
654 .reset_switch = ar8216_reset_switch,
655 };
656
657 static int
658 ar8216_config_init(struct phy_device *pdev)
659 {
660 struct ar8216_priv *priv = pdev->priv;
661 struct net_device *dev = pdev->attached_dev;
662 struct switch_dev *swdev;
663 int ret;
664
665 if (!priv) {
666 priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
667 if (priv == NULL)
668 return -ENOMEM;
669 }
670
671 priv->phy = pdev;
672
673 priv->chip = ar8216_id_chip(priv);
674
675 if (pdev->addr != 0) {
676 if (priv->chip == AR8316) {
677 pdev->supported |= SUPPORTED_1000baseT_Full;
678 pdev->advertising |= ADVERTISED_1000baseT_Full;
679
680 /* check if we're attaching to the switch twice */
681 pdev = pdev->bus->phy_map[0];
682 if (!pdev) {
683 kfree(priv);
684 return 0;
685 }
686
687 /* switch device has not been initialized, reuse priv */
688 if (!pdev->priv) {
689 priv->port4_phy = true;
690 pdev->priv = priv;
691 return 0;
692 }
693
694 kfree(priv);
695
696 /* switch device has been initialized, reinit */
697 priv = pdev->priv;
698 priv->dev.ports = (AR8216_NUM_PORTS - 1);
699 priv->initialized = false;
700 priv->port4_phy = true;
701 ar8316_hw_init(priv);
702 return 0;
703 }
704
705 kfree(priv);
706 return 0;
707 }
708
709 printk(KERN_INFO "%s: AR%d switch driver attached.\n",
710 pdev->attached_dev->name, priv->chip);
711
712 pdev->supported = priv->chip == AR8316 ?
713 SUPPORTED_1000baseT_Full : SUPPORTED_100baseT_Full;
714 pdev->advertising = pdev->supported;
715
716 mutex_init(&priv->reg_mutex);
717 priv->read = ar8216_mii_read;
718 priv->write = ar8216_mii_write;
719
720 pdev->priv = priv;
721
722 swdev = &priv->dev;
723 swdev->cpu_port = AR8216_PORT_CPU;
724 swdev->ops = &ar8216_ops;
725 swdev->ports = AR8216_NUM_PORTS;
726
727 if (priv->chip == AR8316) {
728 swdev->name = "Atheros AR8316";
729 swdev->vlans = AR8X16_MAX_VLANS;
730
731 if (priv->port4_phy) {
732 /* port 5 connected to the other mac, therefore unusable */
733 swdev->ports = (AR8216_NUM_PORTS - 1);
734 }
735 } else {
736 swdev->name = "Atheros AR8216";
737 swdev->vlans = AR8216_NUM_VLANS;
738 }
739
740 if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
741 kfree(priv);
742 goto done;
743 }
744
745 if (priv->chip == AR8316) {
746 ret = ar8316_hw_init(priv);
747 if (ret) {
748 kfree(priv);
749 goto done;
750 }
751 }
752
753 ret = ar8216_reset_switch(&priv->dev);
754 if (ret) {
755 kfree(priv);
756 goto done;
757 }
758
759 dev->phy_ptr = priv;
760
761 /* VID fixup only needed on ar8216 */
762 if (pdev->addr == 0 && priv->chip == AR8216) {
763 pdev->pkt_align = 2;
764 pdev->netif_receive_skb = ar8216_netif_receive_skb;
765 pdev->netif_rx = ar8216_netif_rx;
766 priv->ndo_old = dev->netdev_ops;
767 memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
768 priv->ndo.ndo_start_xmit = ar8216_mangle_tx;
769 dev->netdev_ops = &priv->ndo;
770 }
771
772 done:
773 return ret;
774 }
775
776 static int
777 ar8216_read_status(struct phy_device *phydev)
778 {
779 struct ar8216_priv *priv = phydev->priv;
780 int ret;
781 if (phydev->addr != 0) {
782 return genphy_read_status(phydev);
783 }
784
785 phydev->speed = priv->chip == AR8316 ? SPEED_1000 : SPEED_100;
786 phydev->duplex = DUPLEX_FULL;
787 phydev->link = 1;
788
789 /* flush the address translation unit */
790 mutex_lock(&priv->reg_mutex);
791 ret = ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0);
792
793 if (!ret)
794 priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
795 else
796 ret = -ETIMEDOUT;
797 mutex_unlock(&priv->reg_mutex);
798
799 phydev->state = PHY_RUNNING;
800 netif_carrier_on(phydev->attached_dev);
801 phydev->adjust_link(phydev->attached_dev);
802
803 return ret;
804 }
805
806 static int
807 ar8216_config_aneg(struct phy_device *phydev)
808 {
809 if (phydev->addr == 0)
810 return 0;
811
812 return genphy_config_aneg(phydev);
813 }
814
815 static int
816 ar8216_probe(struct phy_device *pdev)
817 {
818 struct ar8216_priv priv;
819 u16 chip;
820
821 priv.phy = pdev;
822 chip = ar8216_id_chip(&priv);
823 if (chip == UNKNOWN)
824 return -ENODEV;
825
826 return 0;
827 }
828
829 static void
830 ar8216_remove(struct phy_device *pdev)
831 {
832 struct ar8216_priv *priv = pdev->priv;
833 struct net_device *dev = pdev->attached_dev;
834
835 if (!priv)
836 return;
837
838 if (priv->ndo_old && dev)
839 dev->netdev_ops = priv->ndo_old;
840 if (pdev->addr == 0)
841 unregister_switch(&priv->dev);
842 kfree(priv);
843 }
844
845 static struct phy_driver ar8216_driver = {
846 .phy_id = 0x004d0000,
847 .name = "Atheros AR8216/AR8316",
848 .phy_id_mask = 0xffff0000,
849 .features = PHY_BASIC_FEATURES,
850 .probe = ar8216_probe,
851 .remove = ar8216_remove,
852 .config_init = &ar8216_config_init,
853 .config_aneg = &ar8216_config_aneg,
854 .read_status = &ar8216_read_status,
855 .driver = { .owner = THIS_MODULE },
856 };
857
858 int __init
859 ar8216_init(void)
860 {
861 return phy_driver_register(&ar8216_driver);
862 }
863
864 void __exit
865 ar8216_exit(void)
866 {
867 phy_driver_unregister(&ar8216_driver);
868 }
869
870 module_init(ar8216_init);
871 module_exit(ar8216_exit);
872 MODULE_LICENSE("GPL");
873
This page took 0.105936 seconds and 5 git commands to generate.