nbd [Tue, 24 May 2011 09:31:37 +0000 (09:31 +0000)]
base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26990
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 24 May 2011 09:30:24 +0000 (09:30 +0000)]
[PATCH] Add support for git-svn package feeds
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26988
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 24 May 2011 09:27:23 +0000 (09:27 +0000)]
[package] base-files: mark /etc/crontabs/ as config directory
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26986
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 24 May 2011 09:14:35 +0000 (09:14 +0000)]
[PATCH] kernel: kmod-crypto-iv depends on kmod-crypto-manager
Add a missing dependency to kmod-crypto-iv. chainiv.ko and eseqiv.ko
from kmod-crypto-iv depend on crypto_blkcipher.ko from
kmod-crypto-manager.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26984
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 24 May 2011 09:12:50 +0000 (09:12 +0000)]
[PATCH] dnsmasq: allow hostname assignment without static lease
The attached patch for dnsmasq.init allows to assign a hostname to a
particular mac-address. It's useful to override the client supplied
hostname, especially if the client does not supply a hostname at all.
It corresponds to the following example in dnsmasq.conf.example:
# Always set the name of the host with hardware address
# 11:22:33:44:55:66 to be "fred"
#dhcp-host=11:22:33:44:55:66,fred
Regards
Mathias
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26983
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 24 May 2011 08:14:29 +0000 (08:14 +0000)]
[netfilter] package u32 match and TEE target, patches by Maxim Uvarov
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26977
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 22 May 2011 16:53:09 +0000 (16:53 +0000)]
[package] ncurses: enable C++ bindings (#9442)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26970
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 22 May 2011 12:02:35 +0000 (12:02 +0000)]
[package] iw: fix calculation of fractional multicast rates like 5.5Mbps due to wrong operator precedence
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26968
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 20 May 2011 16:21:30 +0000 (16:21 +0000)]
add LD_LIBRARY to cmake.mk
Otherwise cmake programs try to link with host ld.so
Signed-off-by: Jan Willies <jan@willies.info>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26963
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 20 May 2011 13:45:40 +0000 (13:45 +0000)]
[package] firewall: explictely mention network in default configuration, makes it less confusing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26961
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 20 May 2011 10:06:25 +0000 (10:06 +0000)]
[brcm63xx] add support for BT Voyager 2110 (#8810)
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26959
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 20 May 2011 10:06:22 +0000 (10:06 +0000)]
[brcm63xx] add support for DSL-2640B rev B2
Signed-off-by: Adrian Feliks <mexit@o2.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 20 May 2011 10:06:18 +0000 (10:06 +0000)]
[brcm63xx] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26957
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 20 May 2011 10:06:15 +0000 (10:06 +0000)]
[brcm63xx] add support for D-Link DVA-G3810BN/TL
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 20 May 2011 10:06:11 +0000 (10:06 +0000)]
[kernel] refresh 2.6.37 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26955
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 20 May 2011 10:06:07 +0000 (10:06 +0000)]
[brcm63xx] add support for BT Voyager 2500 (#9070)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26954
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 20 May 2011 10:06:04 +0000 (10:06 +0000)]
[brcm63xx] add support for USR9108 LEDs (#9372)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26953
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 20 May 2011 10:06:00 +0000 (10:06 +0000)]
[ar7] add GT701 LEDs support (#9382)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26952
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 19 May 2011 10:08:02 +0000 (10:08 +0000)]
broadcom-wl: fix wild ssb_device accesses as pci_dev for legacy pci dma api
broadcom-wl driver bound to ssb device with ssb driver probe
have osh handle struct pdev pointer value initialized with
ssb_device pointer. Later on pdev is used with legacy pci
dma api as pci_dev thus causing oops sometimes.
The patch replaces legacy pci dma api and pass relevant
device struct pointer to avoid crashes.
Signed-off-by: George Kashperko <george@znau.edu.ua>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26949
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 19 May 2011 10:07:57 +0000 (10:07 +0000)]
broadcom-wl: fix uninitialized variable
It was causing an occasional kernel oops.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26948
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 19 May 2011 09:33:45 +0000 (09:33 +0000)]
ath9k: fix some locking issues in the tx fifo cleanup patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26947
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 19 May 2011 04:29:40 +0000 (04:29 +0000)]
Simple typo for kmod- prefix in alix2 target makefile.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26945
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hcg [Wed, 18 May 2011 12:43:54 +0000 (12:43 +0000)]
[omap35xx]: Remove override of max80211.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26936
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 18 May 2011 12:03:08 +0000 (12:03 +0000)]
ath9k: clean up tx fifo handling on ar9380 based hardware
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26934
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 18 May 2011 12:03:04 +0000 (12:03 +0000)]
ath9k: fix a small race condition in the tx_last_beacon patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26933
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hcg [Wed, 18 May 2011 11:50:36 +0000 (11:50 +0000)]
[omap35xx] Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26932
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 18 May 2011 09:50:06 +0000 (09:50 +0000)]
[PATCH] ipcalc.sh CIDR notation
Hi,
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26930
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 17 May 2011 18:23:50 +0000 (18:23 +0000)]
mac80211: sync the CONFIG_ATH5K_DEBUG make override with the buildflags override (thx, KanjiMonster)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26927
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 17 May 2011 12:54:45 +0000 (12:54 +0000)]
metadata: do not emit feature flag selects for targets which have subtargets - fixes a buildbot error cause by ssb not being blacklisted for lantiq falcon
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26926
3c298f89-4303-0410-b956-
a3cf2f4a3e73
matteo [Tue, 17 May 2011 11:15:24 +0000 (11:15 +0000)]
ar71xx: don't probe the LAN PHY
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26924
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 17 May 2011 11:14:15 +0000 (11:14 +0000)]
ath9k: implement tx_last_beacon() to allow mac80211 to respond to probe requests in ad-hoc mode without creating too much spam
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26923
3c298f89-4303-0410-b956-
a3cf2f4a3e73
matteo [Tue, 17 May 2011 11:12:56 +0000 (11:12 +0000)]
ar71xx: detect link on LAN ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 17 May 2011 10:48:37 +0000 (10:48 +0000)]
[modules]
* add missing aes dependency to mv_cesa
Signed-off-by: Jan Willies <jan@willies.info>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26920
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 17 May 2011 10:35:14 +0000 (10:35 +0000)]
[x86]
* adds support for Artec Thincan
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26919
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 17 May 2011 10:33:46 +0000 (10:33 +0000)]
[tools]
* adds mkelfimage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26918
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 17 May 2011 08:37:38 +0000 (08:37 +0000)]
ath9k: fix ad-hoc nexttbtt calculation, which broke beacon transmission in some instances
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26915
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 16 May 2011 21:50:30 +0000 (21:50 +0000)]
ath9k: fix issues with ad-hoc beacon slot selection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26913
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 16 May 2011 21:50:26 +0000 (21:50 +0000)]
mac80211: update to 2011-05-13
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26912
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 16 May 2011 21:50:20 +0000 (21:50 +0000)]
kernel: backport some ssb changes to support a mac80211 update
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26911
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 15 May 2011 21:28:12 +0000 (21:28 +0000)]
[generic] remove an accidentally copied comment from the option.ko device patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26908
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 15 May 2011 19:17:31 +0000 (19:17 +0000)]
[generic] add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26906
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 15 May 2011 17:23:02 +0000 (17:23 +0000)]
kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26905
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Sun, 15 May 2011 09:37:35 +0000 (09:37 +0000)]
package/kernel: crypto: Remove renamed modules hack
Since the oldest kernel in trunk is 2.6.30 the modules always use the
newer names, so we can just use the _generic prefix directly.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26903
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Sun, 15 May 2011 09:37:32 +0000 (09:37 +0000)]
package/kernel: netfilter: Remove 2.4/2.6 references
There's only 2.6, so it doesn't make sense to mention modules that are
2.4 only or for modules that they are available only for 2.6.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26902
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Sun, 15 May 2011 09:37:28 +0000 (09:37 +0000)]
package/kernel: Remove all 2.4 definitions
With no 2.4 support in trunk, we can safely remove any 2.4 definitions for
kmods and merge the 2.6 definitions into the generic ones.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26901
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Sun, 15 May 2011 09:37:24 +0000 (09:37 +0000)]
package/kernel: Remove $(KMOD_SUFFIX) usage
Since there's only 2.6 in trunk $(KMOD_SUFFIX) can be safely replaced with
ko for all mainline kernel modules.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26900
3c298f89-4303-0410-b956-
a3cf2f4a3e73
matteo [Sat, 14 May 2011 23:31:50 +0000 (23:31 +0000)]
ar71xx: add link detection on Ubiquiti devices WAN port
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26891
3c298f89-4303-0410-b956-
a3cf2f4a3e73
matteo [Sat, 14 May 2011 23:10:06 +0000 (23:10 +0000)]
use correct macros and frame size in ag71xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890
3c298f89-4303-0410-b956-
a3cf2f4a3e73
matteo [Sat, 14 May 2011 23:08:00 +0000 (23:08 +0000)]
ar71xx: cosmetic fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26889
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hcg [Fri, 13 May 2011 11:52:40 +0000 (11:52 +0000)]
Correct libc path
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26885
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hcg [Fri, 13 May 2011 11:49:52 +0000 (11:49 +0000)]
[omap35xx]: Add new defconfig and profile for es variant
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26884
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hcg [Fri, 13 May 2011 10:36:39 +0000 (10:36 +0000)]
[omap35xx] Squash uids
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26883
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Fri, 13 May 2011 07:23:11 +0000 (07:23 +0000)]
[x86] Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26882
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Fri, 13 May 2011 06:08:49 +0000 (06:08 +0000)]
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26880
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Fri, 13 May 2011 06:06:42 +0000 (06:06 +0000)]
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26879
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 May 2011 13:34:14 +0000 (13:34 +0000)]
bcm63xx: Add support for the T-Home Speedport W 303V
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 May 2011 13:34:05 +0000 (13:34 +0000)]
bcm63xx: Add firmware helpers for T-Home Speedport W 303V
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26877
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 May 2011 13:33:50 +0000 (13:33 +0000)]
bcm63xx: Update support for the DSL-274xB revision C
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 May 2011 13:33:45 +0000 (13:33 +0000)]
bcm63xx: Accept any led with power in its name as power led
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26875
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 May 2011 13:33:41 +0000 (13:33 +0000)]
bcm63xx: Decouple Board ID and image name for fixup
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 May 2011 13:33:34 +0000 (13:33 +0000)]
[ep93xx] switch to 2.6.38
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26873
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 May 2011 13:33:30 +0000 (13:33 +0000)]
[kernel] add missing 2.6.38 touchscreen config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26872
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 9 May 2011 20:28:04 +0000 (20:28 +0000)]
[kernel/modules]
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26868
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 9 May 2011 15:21:58 +0000 (15:21 +0000)]
[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
This patch adds 802.1Q VLAN support for the ADM6996M chip.
The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.
The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].
Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt
Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 8 May 2011 21:38:51 +0000 (21:38 +0000)]
ar71xx: populate LED3 on the JA76PF board
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26862
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 8 May 2011 21:38:49 +0000 (21:38 +0000)]
ar71xx: add uci config for the WLAN LED on the WRT160NL
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 8 May 2011 21:38:48 +0000 (21:38 +0000)]
ar71xx: use phy0tpt trigger for the WLAN LEDs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 8 May 2011 21:38:46 +0000 (21:38 +0000)]
ar71xx: remove superfluous fifo_cfg overrides
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26859
3c298f89-4303-0410-b956-
a3cf2f4a3e73
thepeople [Sun, 8 May 2011 17:08:06 +0000 (17:08 +0000)]
[PATCH] ipv6: restore correct ECN handling on TCP xmit
Thanks Dave Taht
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26858
3c298f89-4303-0410-b956-
a3cf2f4a3e73
thepeople [Sun, 8 May 2011 17:03:07 +0000 (17:03 +0000)]
Deployment of IPv6 has opened up many more prefixes than just the
2000::/3 space, so a default route of ::/0 is more correct.
Thanks Dave Taht
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26857
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 8 May 2011 16:32:53 +0000 (16:32 +0000)]
ar71xx: ag71xx: make switch register access atomic
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.
This is easily noticable during an iperf session:
...
[ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec
[ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec
...
[ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec
[ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec
[ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec
[ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 8 May 2011 13:30:36 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix section mismatch warnings
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.
The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 8 May 2011 13:30:26 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix build error if debugfs is enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 8 May 2011 10:25:58 +0000 (10:25 +0000)]
[package] base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26848
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 7 May 2011 12:49:17 +0000 (12:49 +0000)]
brcm47xx: update patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26846
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 May 2011 12:40:34 +0000 (12:40 +0000)]
ar71xx: ag71xx: add debugfs entry for [rt]x_ring
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 May 2011 12:40:28 +0000 (12:40 +0000)]
ar71xx: ag71xx: add timestamps to ag71xx_buf
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 May 2011 12:40:26 +0000 (12:40 +0000)]
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 May 2011 12:40:25 +0000 (12:40 +0000)]
ar71xx: ag71xx: use debugfs_remove_recursive
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 May 2011 09:23:33 +0000 (09:23 +0000)]
base-files: fix a typo in etc/banner
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26841
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 May 2011 09:23:32 +0000 (09:23 +0000)]
ar71xx: override wmac device name for the AR934x SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26840
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 6 May 2011 12:37:40 +0000 (12:37 +0000)]
[ar7] remove useless patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26837
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 6 May 2011 12:37:36 +0000 (12:37 +0000)]
[kernel] fill maintainer infos for a couple of targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26836
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Thu, 5 May 2011 16:35:44 +0000 (16:35 +0000)]
[malta] update to 2.6.38.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26833
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Thu, 5 May 2011 16:35:40 +0000 (16:35 +0000)]
[kernel] add missing 2.6.38 symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26832
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 May 2011 14:05:21 +0000 (14:05 +0000)]
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 May 2011 13:18:35 +0000 (13:18 +0000)]
brcm47xx: fix typo in patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26828
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acoul [Thu, 5 May 2011 07:19:46 +0000 (07:19 +0000)]
linux/ar71xx: add some missing symbols for nand/yaffs targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26827
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 4 May 2011 14:51:06 +0000 (14:51 +0000)]
[package] lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26822
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 4 May 2011 14:35:35 +0000 (14:35 +0000)]
ath9k: add noise floor calibration fix that should improve stability
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26819
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acoul [Wed, 4 May 2011 09:35:06 +0000 (09:35 +0000)]
linux/generic: port yaffs to 2.6.39
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26818
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acoul [Wed, 4 May 2011 08:47:00 +0000 (08:47 +0000)]
linux/rb532: use kernel and initramfs tags on image generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26817
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 4 May 2011 08:19:07 +0000 (08:19 +0000)]
[package] comgt: add tty hotplug remove handling, only iterate each tty once (#9211)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26816
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 May 2011 21:25:36 +0000 (21:25 +0000)]
[package] kernel: revert r26814
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26815
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 May 2011 21:22:43 +0000 (21:22 +0000)]
[PATCH 1/2] kernel: add kmod-crypto-ipsec
kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto
modules that are useful for IPSEC. This is an alternative to breaking
these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng
(rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26814
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 May 2011 21:21:05 +0000 (21:21 +0000)]
[PATCH 2/2] kernel: add kmod-crypto-{wq,rng,iv}
Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the
extraneous kmod-crypto-core dependency to eliminate recursion.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26813
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 May 2011 21:19:56 +0000 (21:19 +0000)]
[PATCH 1/2] kernel: add kmod-crypto-{wq,rng,iv}
This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv
packages. These packages provide some missing kernel crypto modules
which are required for IPSEC. The strongswan4, ipsec-tools, and possibly
other IPSEC packages do not work properly without these modules.
NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26812
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 May 2011 21:18:12 +0000 (21:18 +0000)]
[PATCH] geos: remove unneeded modules
The via-sata and gpio-nsc modules are both unneeded on the Geos platform.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26811
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 May 2011 19:45:55 +0000 (19:45 +0000)]
[package] comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26810
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 May 2011 19:39:13 +0000 (19:39 +0000)]
[package] comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug (#9211)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26809
3c298f89-4303-0410-b956-
a3cf2f4a3e73
This page took 0.080321 seconds and 4 git commands to generate.
projects / openwrt.git / log