git.rohieb.name - openwrt.git/log

projects / openwrt.git / log

summary | shortlog | log | commit | commitdiff | tree
first ⋅ prev ⋅ next

commit | commitdiff | tree

juhosg [Thu, 26 Jan 2012 17:01:44 +0000 (17:01 +0000)]

ar71xx: create a profile and build images for Compex WPE72

[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 26 Jan 2012 17:01:43 +0000 (17:01 +0000)]

firmware-utils/mkmylofw: add WPE72 support

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29913 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 26 Jan 2012 17:01:41 +0000 (17:01 +0000)]

ar71xx: add support for Compex WPE72/WPE72NX

This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29912 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 26 Jan 2012 17:01:38 +0000 (17:01 +0000)]

generic: add WPE72 ID to myloader.h

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29911 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 26 Jan 2012 10:44:23 +0000 (10:44 +0000)]

ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards

This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 25 Jan 2012 07:44:46 +0000 (07:44 +0000)]

mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb

Hi!

On Mon, Nov 14, 2011 at 03:01:34PM +0100, Daniel Golle wrote:
> The driver works quite nice and stable for me using a RaLink Rt5370 USB device.
>
> Signed-off-by: Daniel Golle <dgolle@allnet.de>
>
> Index: package/mac80211/Makefile
> ===================================================================
> --- package/mac80211/Makefile (revision 29114)
> +++ package/mac80211/Makefile (working copy)
> @@ -1147,6 +1147,7 @@
>   CONFIG_RT2800_LIB=$(if $(CONFIG_PACKAGE_kmod-rt2800-lib),m) \
>   CONFIG_RT2800PCI=$(if $(CONFIG_PACKAGE_kmod-rt2800-pci),m) \
>   CONFIG_RT2800USB=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),m) \
> + CONFIG_RT2800USB_RT53XX=$(if $(CONFIG_PACKAGE_kmod-rt2800-usb),y) \
>   CONFIG_RTL8180=$(if $(CONFIG_PACKAGE_kmod-rtl8180),m) \
>   CONFIG_RTL8187=$(if $(CONFIG_PACKAGE_kmod-rtl8187),m) \
>   CONFIG_RTL8192CE= \

Aparently this was wrong, CONFIG_RT2800USB_RT53XX is supposed to live in
BUILDARGS rather than MAKE_OPTS to actually get support for the Rt5370.
Thanks to actmnophn for the hint!

This reverts changeset 29116 and adds it to the right section in the Makefile.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29906 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 25 Jan 2012 07:44:45 +0000 (07:44 +0000)]

ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour

This patch fixes the board detection of the TL-MR3020.

The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.

The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.

[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29905 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 25 Jan 2012 07:44:43 +0000 (07:44 +0000)]

ar71xx: TL-MR3020: fix GPIO polarity for button and switch

This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29904 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Tue, 24 Jan 2012 21:44:00 +0000 (21:44 +0000)]

netifd: update to latest, fixes a crash when the interface protocol was not specified

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29903 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Tue, 24 Jan 2012 20:54:13 +0000 (20:54 +0000)]

[package] hostapd: introduce a client_cert option which is passed on to wpa_supplicant (#8876)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29901 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 20:12:10 +0000 (20:12 +0000)]

ar71xx: use the lzma loader on the Planex boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 20:12:08 +0000 (20:12 +0000)]

ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 18:40:38 +0000 (18:40 +0000)]

ar71xx: fix the AP/Router LED definitons on MZK-W300NH

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29897 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 18:40:36 +0000 (18:40 +0000)]

ar71xx: preset WLAN LED config on MZK-W300NH

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29896 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 18:40:34 +0000 (18:40 +0000)]

ar71xx: remove hardcoded MTD layout from planex files

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29895 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 18:40:33 +0000 (18:40 +0000)]

ar71xx: pass mtdlayout to Planex boards via command line

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 18:40:31 +0000 (18:40 +0000)]

ar71xx: remove an unused header file

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29893 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 11:48:48 +0000 (11:48 +0000)]

ramips: generate sysupgrade image for the ALL0256N

Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29884 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 11:48:47 +0000 (11:48 +0000)]

ramips: add user-space support for ALL0256N

This adds uci-defaults and sysupgrade support for the ALL0256N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29883 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 11:48:45 +0000 (11:48 +0000)]

ramips: add kernel support for ALL0256N

Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29882 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

blogic [Tue, 24 Jan 2012 11:31:23 +0000 (11:31 +0000)]

[lantiq] Initial DSL framework

- Removed ifx_cpe_control_init.sh (the old init script)
- Created dsl_control (/etc/init.d)
- tidied up start and stop
- stop calls dsl_notify before killing daemon
- has status and lucistat options to provide detail
- copes with daemon not running situation
- Updated package makefile to use new init script and to build cli support
- Provide a dsl_notify.sh script to cope with line up/down events

Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29881 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 09:47:25 +0000 (09:47 +0000)]

ar71xx: nuke fs_all variable in image/Makefile

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 09:47:23 +0000 (09:47 +0000)]

ar71xx: create interim kernel files in a separate dir

This reduces the size of the ImageBuilder tarball a lot.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 09:47:22 +0000 (09:47 +0000)]

ar71xx: prebuild all loaders in Image/Prepare stage

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 24 Jan 2012 09:47:20 +0000 (09:47 +0000)]

ImageBuilder: respect the PROFILE parameter

Based on a patch from #10766

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29877 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Tue, 24 Jan 2012 01:49:23 +0000 (01:49 +0000)]

hostapd: merge an upstream workaround for broken clients sending the wrong wpa type (should fix #9561)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29876 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Mon, 23 Jan 2012 10:23:32 +0000 (10:23 +0000)]

ramips: scripts updates

In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29871 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Mon, 23 Jan 2012 08:52:21 +0000 (08:52 +0000)]

ar71xx: 3.2: fix build errors if PCI is not enabled

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29870 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Mon, 23 Jan 2012 08:52:18 +0000 (08:52 +0000)]

ar71xx: fix compiler warning if PCI is not enabled

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29869 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 22:38:19 +0000 (22:38 +0000)]

ar71xx: add initial support for 3.2

Tested on the following boards:
  ALFA AP96
  TL-MR3220 v1
  TL-WR1043ND v1
  TL-WR2543ND v1
  TL-WR703N v1
  TL-WR741ND v1
  TL-WR741ND v4
  WNDR3700 v1
  WZR-HP-G300NH

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29868 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 22:38:11 +0000 (22:38 +0000)]

ar71xx: move arch specific files to files-2.6.39

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29867 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 22:33:15 +0000 (22:33 +0000)]

ar71xx: build ALFA AP96 images with default profile as well

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Sun, 22 Jan 2012 22:25:42 +0000 (22:25 +0000)]

[package] base-files: add a uci-defaults script which will migrate the root password to /etc/shadow if needed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29865 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sun, 22 Jan 2012 21:14:30 +0000 (21:14 +0000)]

netifd: update to latest version, add some more status info and rework shell proto handler support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29864 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sun, 22 Jan 2012 21:14:26 +0000 (21:14 +0000)]

netifd: always issue a reload on ifup, not just for -a

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29863 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sun, 22 Jan 2012 21:14:22 +0000 (21:14 +0000)]

base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29862 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 18:43:45 +0000 (18:43 +0000)]

package/kernel: add ATH79 symbols for OHCI/EHCI drivers

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29861 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 18:43:39 +0000 (18:43 +0000)]

generic: 3.2: allow to build myloader mtd parser for ATH79

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29860 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 18:36:49 +0000 (18:36 +0000)]

generic: allow to build myloader mtd parser for 3.2+

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29858 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 18:11:39 +0000 (18:11 +0000)]

ramips fix f5d8235-v1 diag LED support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29857 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 17:55:38 +0000 (17:55 +0000)]

ar71xx: wrt160nl_part: include module.h and fix compiler warnings

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29856 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 17:55:36 +0000 (17:55 +0000)]

ar71xx: tplinkpart: include module.h

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29855 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 13:51:57 +0000 (13:51 +0000)]

ar71xx: rename vsc7385 spi driver

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29853 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 13:51:56 +0000 (13:51 +0000)]

ar71xx: rename ap81 spi driver

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29852 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 13:51:54 +0000 (13:51 +0000)]

ar71xx: rename rb4xx spi drivers

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29851 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 13:51:52 +0000 (13:51 +0000)]

ar71xx: rename the nxp_74hc153 driver

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29850 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 13:51:50 +0000 (13:51 +0000)]

ar71xx: change board id of the UniFi board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 13:51:49 +0000 (13:51 +0000)]

ar71xx: include linux/module.h in the micrel phy driver

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29848 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 13:43:23 +0000 (13:43 +0000)]

ramips: add sysled and sysupgrade to wr512-3gn

Patch from #10035.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29847 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 22 Jan 2012 09:57:39 +0000 (09:57 +0000)]

generic: 3.2: don't disable lockdep for OOT modules

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29846 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 21 Jan 2012 22:44:09 +0000 (22:44 +0000)]

generic: rtl8366: add rtl8366_smi_write_reg_noack helper

After issuing a soft reset on the RT8366{S,RB}
switch, waiting for the last acknowlegement fails
in rtl8366_smi_write_reg. Add a _noack version of
the function and use that for issuing a soft reset.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29844 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Sat, 21 Jan 2012 22:39:20 +0000 (22:39 +0000)]

brcm47xx: add support for pcie host controller on bcma based SoCs.

This also adds minimal support for the BCMA43224 pcie wireless card.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29843 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

mirko [Sat, 21 Jan 2012 19:39:37 +0000 (19:39 +0000)]

[toolchain/eglibc] eglibc 2.14 needs our eglibc patchset as well

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29842 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Sat, 21 Jan 2012 09:49:53 +0000 (09:49 +0000)]

[tools] libtool: fix accidental sed invocation in libtoolize

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29839 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

mirko [Sat, 21 Jan 2012 01:15:24 +0000 (01:15 +0000)]

trying to make README file a bit more helpful

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29837 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

mirko [Fri, 20 Jan 2012 22:54:30 +0000 (22:54 +0000)]

[toolchain/binutils] adjust md5sum of v2.21.1 since archive got replaced meanwhile

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29836 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 21:31:03 +0000 (21:31 +0000)]

[include] autotools.mk: fix autoreconf in subdirectories, thanks field_it for spotting this

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29835 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 17:54:43 +0000 (17:54 +0000)]

[tools] quilt: some more relocatable fixes for quilt-internal scripts

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29834 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 17:36:30 +0000 (17:36 +0000)]

[package] openssl: update to v1.0.0g (CVE-2012-0050)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29832 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 17:30:38 +0000 (17:30 +0000)]

[tools] bison: make yacc wrapper relocatable

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29831 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 17:17:04 +0000 (17:17 +0000)]

[toolsÂ] autoconf: make bin/autoconf relocatable as well

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29830 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 17:11:37 +0000 (17:11 +0000)]

[tools] quilt: make relocatable, search resources relative to STAGING_DIR

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29829 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 15:19:22 +0000 (15:19 +0000)]

[tools] automake: further relocation fixes

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29828 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 15:19:06 +0000 (15:19 +0000)]

[tools] autoconf: further relocation fixes

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29827 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 14:51:44 +0000 (14:51 +0000)]

[tools] libtool: make relocatable, search resources relative to STAGING_DIR

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29826 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 12:59:20 +0000 (12:59 +0000)]

[package] remove empty br2684ctl

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29825 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Fri, 20 Jan 2012 10:49:26 +0000 (10:49 +0000)]

ramips: sysupgrade for ESR-9753

This patch add sysupgrade for Engenius ESR-9753

Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29824 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 02:56:08 +0000 (02:56 +0000)]

[tools] autoconf: make relocatable by searching resources relative to STAGING_DIR

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29821 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Fri, 20 Jan 2012 02:55:55 +0000 (02:55 +0000)]

[tools] automake: make relocatable by searching resources relative to STAGING_DIR

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29820 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jogo [Thu, 19 Jan 2012 19:51:54 +0000 (19:51 +0000)]

kernel: fix OCF for linux 3.2

Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29818 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 15:37:47 +0000 (15:37 +0000)]

[package] base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29806 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 12:19:28 +0000 (12:19 +0000)]

[buildroot] abort built in prereq target if there is no site config file for the current target

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29798 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jogo [Thu, 19 Jan 2012 08:25:26 +0000 (08:25 +0000)]

package: kernel: fix files for blowfish and pcimcia-rsrc

Based on a patch from Philip Prindeville.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29797 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 03:10:27 +0000 (03:10 +0000)]

[include] site: add configure cache scripts for mips-linux-gnu and mipsel-linux-gnu, used by CodeSourcery toolchain

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29794 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 01:57:22 +0000 (01:57 +0000)]

[adm5120] add missing kernel symbols

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29790 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 01:50:53 +0000 (01:50 +0000)]

[package] busybox: fix previous commit, make CONFIG_BUSYBOX_CONFIG_FEATURE_IPV6 default to CONFIG_IPV6, not depend on it

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29789 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 01:33:53 +0000 (01:33 +0000)]

[package] busybox: make CONFIG_BUSYBOX_CONFIG_FEATURE_IPV6 depend on CONFIG_IPV6

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29788 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 01:14:45 +0000 (01:14 +0000)]

Make the grub timeout configurable on x86 targets

Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29786 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 00:31:39 +0000 (00:31 +0000)]

x86/config-3.2: add linux-3.2 symbols for x86

The following symbols are missing for x86, in sorted order.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29783 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 00:03:52 +0000 (00:03 +0000)]

[scripts] ext-toolchain.sh: CONFIG_NLS -> CONFIG_BUILD_NLS

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29782 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Thu, 19 Jan 2012 00:01:54 +0000 (00:01 +0000)]

[scripts] ext-toolchain.sh: fix typo

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29781 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 23:46:06 +0000 (23:46 +0000)]

[scripts] ext-toolchain.sh: add option to write .config
Add a new --config option to generate a .config from a given toolchain,
this allows for easy integration of external toolchains, e.g.

./scripts/ext-toolchain.sh --toolchain /opt/mips-2011.03 --cflags "-muclibc" --config atheros

to setup a ready-to-compile atheros target using the external CodeSourcery toolchain.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29780 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 19:22:14 +0000 (19:22 +0000)]

[package] mtd: external toolchains usually do not know about MTDREFRESH, so search in $(LINUX_DIR)/include first, fixes compilation with external CodeSourcery toolchain

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29779 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 19:05:48 +0000 (19:05 +0000)]

[package] iptables: pass --disable-ipv6 if CONFIG_IPV6 is off, fixes undefined refs to in6addr_any when compiling with external CodeSourcery toolchain

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29778 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 19:00:53 +0000 (19:00 +0000)]

[package] dnsmasq: if CONFIG_IPV6 is off, compile with -DNO_IPV6 - solves unresolved refs to in6addr_any when building with external CodeSourcery toolchain

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29777 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Wed, 18 Jan 2012 17:13:23 +0000 (17:13 +0000)]

packages: kernel: add usb-common.ko to usb package for kernel >= 3.2

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29776 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 14:48:16 +0000 (14:48 +0000)]

[package] openssl: fix syntax error in OpenWrt Makefile

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29774 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

florian [Wed, 18 Jan 2012 07:56:02 +0000 (07:56 +0000)]

[kernel] fix thinko in 102-ehci_hcd_ignore_oc patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29773 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 04:03:15 +0000 (04:03 +0000)]

[scripts] ext-toolchain.sh: properly handle toolchains without sysroot support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29772 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 03:54:09 +0000 (03:54 +0000)]

[package] openssl: don't fail with empty TARGET_LDFLAGS

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29770 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 03:32:30 +0000 (03:32 +0000)]

[scripts] ext-toolchain.sh:
- use GCC's own idea of the target name (-dumpmachine)
- display help if called without args
- add copyright foo
- remove some leftover flag handling code

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29769 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 03:15:22 +0000 (03:15 +0000)]

[toolchain] invoke patch-specs.sh in the gcc/final install stage.
Patch up OpenWrts own cross toolchains to always search headers
and libraries in $STAGING_DIR, this should solve most issues with
missing headers, indirect linking and not found libraries.
At a later stage, all -I and -L flags will be purged from
TARGET_LDFLAGS and TARGET_CPPFLAGS.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29768 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 03:11:45 +0000 (03:11 +0000)]

[scripts] add patch-specs.sh, a utility for modifying GCC specs
The patch-specs.sh utility dumps the GCC specs of a given toolchain
and modifies them to always include $STAGING_DIR in the link and
compiler command lines, this makes most -I and -L flags unnecessary
and lets the compiler automatically find libraries and headers in
the staging dir, also solves the majority of -rpath issues.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29767 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 03:08:09 +0000 (03:08 +0000)]

[buildroot] use ext-toolchain.sh to integrate external toolchains
Use ext-toolchain.sh to wrap external toolchain commands,
abort build if certain features such as CONFIG_SOFT_FLOAT or
CONFIG_IPV6 are enabled but not supported by the toolchain.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29766 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 18 Jan 2012 03:03:24 +0000 (03:03 +0000)]

[scripts] add ext-toolchain.sh, a utility for external toolchains
The ext-toolchain.sh utility script implements various external toolchain tasks:
  * Testing of available features, like c++, soft-float or ipv6 support
  * Finding the libc implementation (uclibc or eglibc/glibc)
  * Inferring the GNU target name
  * Finding shared objects for packaging (libc, libpthread, ...)
  * Finding executables for packaging (ldd, gdbserver, ...)
  * Generating wrapper scripts for toolchain commands

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29765 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

blogic [Tue, 17 Jan 2012 12:10:35 +0000 (12:10 +0000)]

[lantiq] gigaset 76x

* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

blogic [Tue, 17 Jan 2012 11:23:11 +0000 (11:23 +0000)]

ramips: Rework ramips_eth to not require irqsave locking anymore

Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29762 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Mon, 16 Jan 2012 08:14:27 +0000 (08:14 +0000)]

rt2x00: add a patch to avoid excessive memmove() on packet contents to improve performance (patch by Helmut Schaa)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29760 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Sun, 15 Jan 2012 21:18:34 +0000 (21:18 +0000)]

brcm47xx: add support for kernel 3.2

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29756 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Sun, 15 Jan 2012 14:53:32 +0000 (14:53 +0000)]

brcm47xx: run kernel_oldconfig

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29755 3c298f89-4303-0410-b956-a3cf2f4a3e73

Personal OpenWRT clone

This page took 0.063833 seconds and 4 git commands to generate.