TynyRep Daten wurden verändert.

diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index be71139..1bf9929 100644 (file)
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Sun Apr 24 23:42:45 2016
+# generated by Slic3r 1.2.9 on Tue Apr 26 23:46:04 2016
 
 [filament:LULZBOT PLA]
 bed_temperature = 50
@@ -41,14 +41,14 @@ bed_temperature = 0
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 2
-extrusion_multiplier = 1
+extrusion_multiplier = 0.9
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #35E1FF
 filament_diameter = 1.7
 first_layer_bed_temperature = 0
 first_layer_temperature = 200
-max_fan_speed = 100
+max_fan_speed = 50
 min_fan_speed = 35
 min_print_speed = 5
 slowdown_below_layer_time = 15
@@ -74,7 +74,7 @@ temperature = 180
 
 [presets]
 filament = TinyBoy PLA.ini
-print = MendelPro.ini
+print = TinyBoy.ini
 printer = MendelPro.ini
 
 [print:LULZBOT]
@@ -113,7 +113,7 @@ infill_only_where_needed = 0
 infill_overlap = 15%
 infill_speed = 80
 interface_shells = 0
-layer_height = 0.4
+layer_height = 0.2
 max_print_speed = 80
 max_volumetric_speed = 0
 min_skirt_length = 0
@@ -200,7 +200,7 @@ infill_only_where_needed = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
-layer_height = 0.4
+layer_height = 0.2
 max_print_speed = 35
 max_volumetric_speed = 0
 min_skirt_length = 1
@@ -287,7 +287,7 @@ infill_only_where_needed = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
-layer_height = 0.4
+layer_height = 0.2
 max_print_speed = 80
 max_volumetric_speed = 0
 min_skirt_length = 1