Die Seite wurde neu angelegt: „avoid_crossing_perimeters = 0 bed_shape = 0x0,200x0...

diff --git a/RepRap%2FConfigs%2FSlic3r%2FSintox%2Fabs_gross.ini.mw b/RepRap%2FConfigs%2FSlic3r%2FSintox%2Fabs_gross.ini.mw
new file mode 100644 (file)
index 0000000..2998d46
--- /dev/null
+++ b/RepRap%2FConfigs%2FSlic3r%2FSintox%2Fabs_gross.ini.mw
@@ -0,0 +1,119 @@
+avoid_crossing_perimeters = 0
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 80
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M84     ; disable motors\nM104 S0 ; turn off extruder temperature\nG0 X0    ; move X axis to 0\nG1 Y198 F6000 ; drive print table all the way out\nM84     ; disable motors\n
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 35%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_bed_temperature = 80
+first_layer_extrusion_width = 200%
+first_layer_height = 0.25
+first_layer_speed = 50%
+first_layer_temperature = 240
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 70
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.2
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 80
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 5
+retract_length_toolchange = 10
+retract_lift = 1
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+seam_position = aligned
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 70
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 X0 Y0 ; home X and Y\nG0 X60; move to X60\nG92 X0; set postition to X=0\nG92 Y40; set position to Y=0\nG28 Z0; home Z
+support_material = 1
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 20
+support_material_threshold = 0
+temperature = 240
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 60
+top_solid_layers = 4
+travel_speed = 130
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+xy_size_compensation = 0
+z_offset = 0